Relic Run 2021: Rally at the Reservoir

The Challenge

Every good trip starts out with a list. You know, that check list that you got all the camping gear, food, recovery gear and maybe even some spare parts to ward off the broken ones. (It’s common knowledge that if you bring spare parts you won’t need them, right?). How much you bring depends on where you are going and what you are driving. For this trip the list of things will be mostly comprised of vintage parts, vintage camping gear and even a couple of vintage guys who grew up before cell phones and GPS.

Where would one take all this vintage stuff? Relic Run 2021 hosted by Expedition Utah. Relic Run is a get together of vintage 4×4’s from all makes and models. The run itself is designed to celebrate the mechanized great outdoors. This means break out those gas Coleman lanterns, look up those camping recipes for the Dutch oven, and grab those aluminum lawn chairs from grandma’s attic.  The official outfit of Relic Run depends on the year of your vehicle. Cut off shorts, 70’s rock band t-shirts and Chuck Taylors fit in well in pretty much any decade. Each year the event switches from a base camping trip to a multi-day journey styled as a car camping Safari of yesteryear. 

People migrate from all over the US to take part in Relic Run, but not just anyone can attend. You need to qualify first. How do you qualify? You need a period correct 4×4 vehicle and matching camping gear that predates 1989. The Vehicles really are the stars of the show. The more period correct, the bigger the challenge. Anyone can get in a New Jeep JL and drive across country, but it takes skill and tenacity to get in a vintage 4×4 and experience the great outdoors the way your grand parents did. By reliving these adventures, we pay homage to a generation that was so tough, they just thought it was normal life.

Getting There

This year’s relic Run was hosted on the banks of Wyoming’s flaming gorge. This is where the true adventure begins. Our vintage 4×4 started life in 1972. The K5 Blazer was Chevrolets answer to the Ford Bronco. Based on the ½ ton chevy pickup, the K5 Blazer shared all the same running gear and cargo capacity as the same year Chevy truck. This made a great platform to haul camping gear, fishing gear, and even tow a trailer. Since this year was a base station Relic Run, we chose to Glamp in a 1975 trillium 4500. This trailer is built like a boat. The fiberglass outer shell and fiberglass interior is incredibly light and strong creating a great overlanding trailer before the term was ever coined.

Getting to the gorge in a 1972 K5 blazer towing a vintage fiberglass travel trailer nearly 1000 miles before the event even starts was the true challenge. With weeks of prep checked off the list, The K5 was finally ready for its first task. Pick up its co-driver “Red” Phil Griffis from San Diego airport. Red is no stranger to Relic Run and old cars. He helped acquire the K5 years ago and has ticked off many miles behind the wheel. No sooner than we loaded his gear Red was handed a paper map as relic navigation and we set off to follow the old routes the best we could towards Salt Lake City.

This would include Route 66 and passing though forgotten ghost towns the freeways bypassed long ago. The old routes cleverly avoid steep hills with names like Cajon pass and Baker grade saving wear and tear on a nearly 50yo rig. Normally we would drive at night to avoid the deserts blistering heat, but our confidence was high in our K5, so we passed through the high desert during the hottest time of the day. The AC was blowing cold, but the interior was still 90 degrees. Turns outs, that was pretty generous since the outside air temp was 110 degrees with 70% humidity.

Verne Simons & the CJ5

Still west of the Colorado river, we got a cryptic text at 11am saying (it’s ready). Our friend Verne Simons had decided to disassemble two CJ5s to create one really period correct original Jeep. He was able to tear the body off the frame and rewire the whole vehicle between 2 Saturdays.

Verne is not only our resident Jeep expert; he’s also been writing 4×4 content articles in multiple magazines for two decades. No sooner did Verne notify us the CJ5 was ready, he quickly loaded up his gear and headed out. Verne’s home base is near Phoenix. High noon in a Jeep CJ would be the ultimate test of determination, hydration, and salt retention as he set out to meet us along our journey.

As the sun started setting the heat remained constant. Cryptic communication continued as we figured our paths would collide on the back side of Vegas about 9pm. Driving the CJ-5 loaded with 10 days of camping and two dogs, he’d actually done it. From a literal pile of parts on the previous Saturday, Verne created a functioning vehicle and put 250 miles across the hottest desert for its first test. Verne arrived a bit dingy from the heat and worried about the additional 700 miles to go. As a team, Red, Verne and Myself went over the Jeep to make sure all systems were functioning correctly and reassured Verne the vehicles and crew were up to the challenge. Once the dogs were fed and watered, the vehicles got one last examination, and we were in search of tonight’s camp. Just north of Lake Mead we pulled off in some mud hills at about 11pm. It was still hot, and the humidity reminded us of Atlanta with not so much as a breeze. This made sleep in short supply. 

Breakdown Day

Some of us slept better than others, but it was time to get up, take some morning pictures, check over the vehicles again and hit the road. We still had 500 miles to go. It was hot and a true oasis sounded like a smart stop on our road day. It’s important to mention that we left days early to the event in anticipation of Murphy’s Law. “What can go wrong, Will go wrong” We live by a code, “you can’t be mad about the situation you put yourself in”. So, when things go wrong it’s just part of the adventure. We were in search of a place called Toquerville Falls. All navigation showed it as 3.5 miles off the highway. Turns out it was a decent 4×4 trail with steep grades, sharp ledges, and dusty desert roads. So, we dropped the trillium at the trailhead, aired down the Milestar Patagonia M/T’s and switched to low range. 

The k5 Trans was not liking the additional heat and stress of low range and without that high-speed air through the radiator, the engine was cooking under the hood. The Carb on the CJ5 was flooding over and wanted more speed also to keep from stalling out. We arrived at the falls greeted by other off-road enthusiasts smiling and splashing in the pools below. The falls were a welcome relief to the relentless heat. We visited the falls just long enough to get recharged. With soaking wet clothes, this made the trail ride to the blacktop palatable.

A quick stop to air up the tires started a chain of events you just couldn’t make up. While the K5 was running at a high idle to keep the ARB compressor putting out 6cfm, the alternator started to smell funny. Little did we know that the electronics in the K5 were about to get a shock to the system. Mind you no electronics like heat, the alternator poured smoke out from under the hood and the ignition cut out. We disabled the alternator and tried to move on, but the ignition started shooting ducks (backfiring and sputtering). Our next move was to install the spare ignition parts and move on. So, we changed out the cap, rotor, and ignition module. The K5 was running again.

On the freeway we went or so we thought as it started shooting ducks again. The next exit was coming up fast, so we pulled off and found a safe place to work. No sooner did we pull off, Verne called on the radio, (he’d picked up a drivetrain vibration). Verne crawled under his rig and we crawled back into the engine compartment for a second ignition module and a coil this time. Verne’s repair turned out to be simple. Remove the offending rear driveshaft and turn his Jeep CJ5 into a front wheel drive.

The CJ5’s rear drive shaft had a bad U joint. This was compounded by a marginal yoke and we suspected the rear shaft was too long. Back on the road again, the K5 was still running without an alternator and Verne needed U joints so our next stop was Napa auto parts. The Auto parts parking lot soon became a repair station as Vern built a driveshaft and the K5 got a new alternator. This was all par for the course. Smiling and joking about the repairs is all part of the adventure. Hungry and tired, we found some great food in cedar city and jumped on the highway again. One mile from our next exit the CJ5 started to sputter. The chatter on the radio diagnosed that we may have forgotten to get fuel.  Dodging through traffic cones Verne coasted right up besides the K5 and we dumped the K5’s spare fuel in the CJ5. The old 304 v8 fired right back up and we were running smoothly again. Camp was right around the corner in a high elevation forest, and this would be the best night’s sleep so far. 

Flaming Gorge

The next day both vehicles ran perfectly covering a mix of dirt and asphalt about 400 miles to arrive at the eastern shore of the flaming gorge reservoir. This would be the base station for Relic Run 2021. Our arrival timing was perfect as the sun set over the water.

We pulled into camp just as the last light slipped away so we could get our sleeping situations arranged. The 1973 CJ5 and the 1972 K5 made the 950-mile trek across deserts, up into forests, and ate up asphalt in true vintage style.  As the morning light brightened with daybreak, we realized how cool our Relic Run campsite really was.

Several miles of abandon shoreline connected to crystal clear water, we were finally able to scrub off the sweat and dust from our travels. The water was refreshing and reminded us of why we love adventures. 

Relic Run 2021

Thursday afternoon was the official start of relic run. Vintage 4×4’s from the tri state area started rolling in filled with vintage camping gear like gasoline stoves, flannel sleeping bags, canvas tents and cast-iron pans for making recipes long since forgotten. The first night was a meet and greet where everyone shared hors d’oeuvres. (Clever snacks your grandparents probably made for parties and mixers). Story swapping went on for hours until Mother Nature sent us all to bed with a stiff breeze and light rain. The next morning campers were up early chatting about tents that blew down or water on their vintage cot and cotton sleeping bags. 10am came around and it was time for a trail ride. 8 of the most eclectic vehicles showed up from a right-hand drive Toyota BJ71 to a Dodge power wagon.

 

These people loved all things 4WD, but that didn’t stop the brand loyalty rivalry. Toyotas outnumbered Jeeps making them feel superior, and Fords stayed at camp proving Chevrolet was the true workhorse that weekend. The destination of the trail ride was 3 corners monument. This is where Wyoming, Utah, and Colorado meet. A 60-mile round trip consisting of smooth graded dirt roads, broken asphalt, and forest 2 tire tracks didn’t disappoint as the scenery ever evolved. 

 Along the way we saw cattle, pronghorn, grouse and even a moose. Back to camp just in time for one last swim, The Relic Runners needed to get to work building vintage meals for the evening’s potluck dinner. Casseroles, meatballs, pasta salads, along with upside down cakes and baked goods left everyone full and satisfied. 

A Day Off

Saturday was a day with little to do but soak up water and sun. We fished the bay in our vintage boats as others sat in aluminum lawn chairs in the water. This was also a great day to look over the aging 4×4’s and do any last-minute maintenance for Sunday’s trip home. Verne added an additional power port to charge his phone, the CJ and the K5 both took a quart of oil and seemed to be on the same schedule of drinking habits. The highlight Saturday had to be the taco assembly line sponsored by Expedition Utah. Bob Dubois “The Mayor of Relic Run” had picked up 50 lbs. of marinated meat and we aligned camp stoves, BBQ’s and scottles to feed the entire group several times over. The food was excellent, but the company was even better.

It was fun to watch the Relic Runners get competitive as others steered clear of the classic Red Ryder (in fear of shooting their eye out we suppose).

It was time for the annual BB gun contest. Pop cans were hung in the trees with fishing line creating a ‘’tin can alley’’. Each can was awarded points and the points tallied for your team. The most points to a single shooter got vintage prizes collected at yard sales and storage auctions. The team that won got bragging rights for a full year. It was fun to watch the Relic Runners get competitive as others steered clear of the classic Red Ryder (in fear of shooting their eye out we suppose). The sun was setting as the winners of the BB gun shoot were awarded their prizes. The snack tables still had brownies and pineapple upside down cake on it, so people split their time around the dessert table and enjoying the water. Relic Runners continued to swap stories and favorite destinations well into the morning. 

Goodbye

Sunday morning had people stirring early taking down tents and folding up gear. As people gathered around the last coffee pot, heartfelt goodbyes were said, and info was exchanged for new friends. Rigs slowly made their way to the highway until camp was silent again leaving behind only tire tracks and footprints. 

The CJ5 and the K5 would leave camp together but split up about 250 miles into Utah. This was the moment vacation felt like it was finally ending. Each Relic Runner takes home a different experience. For some it’s the love of old 4×4’s, others its to embrace a time forgotten before data plans and streaming networks. For me, it’s the challenge resurrecting a vehicle to its original glory and showing the world its capabilities are still valid in this modern society. So, if you think you have what takes to build a vintage 4×4, love vintage camping gear, then it sounds like you might just be a Relic Runner.

About Ryan Kennelly:
Ryan Kennelly leads a team designers creating aftermarket off road products during the day. After work he builds vintage 4×4’s specifically for off road adventures. To follow along in real time, checkout @dirtstar2002 on Instagram. 

Hodson Motors’ Forest Service Ford F-250 Restomod

In our last feature installment starring the father and son duo at Hodson Motors, Derrick and Riley Hodson, we explored their amazing beast of a truck—the ’83 Jeep J10 they affectionately refer to as the JRT10. Outfitted with a V-10 Viper engine, SRT10 interior, a full 4-inch lift and all the fixins, along with a unique visual appeal that has become the Hodson’s calling card, the JRT10 is staying put in the permanent Hodson collection. However, the truck is always in high demand when fans are able to take a closer inspection. 

“Dad comes up with these crazy concepts for truck builds, briefs me on his vision, and sends me off to make it happen.”Riley Hodson

With so many impressive completed and in-progress projects to look at, we’ve decided to reserve some space on the Internet to take a well-deserved peek at a truck that means a lot to Derrick. “This 1964 Ford F250 is something particularly cool that my dad wanted to build”, Riley says. Now, for those who aren’t up to speed on how the Hodsons operate their shop, their method is pretty straightforward and very effective. “Dad comes up with these crazy concepts for truck builds, briefs me on his vision, and sends me off to make it happen”, adds Riley. This is the truck that really kick started Derrick’s truck collecting and established Riley’s work flow to make said trucks come to life. 

In the case of this F250, the plan was to dig up something quite rare, which is now par for the Hodson course, and add some special parts to really make it come together, which is also a common ingredient in the family recipe. “This truck here is actually a factory F250 4×4 short bed”, Riley admits. “But what really makes it unique is that it was a custom ordered short bed, as it was a brush fire truck with a water tank in the bed. These kinds of trucks were used at National Parks by the Forest Service.” 

The first step in the project was to first locate one of these trucks out in the wild, which is a process Riley now has down to a science. “The hard part is not really finding these trucks, it’s the actual digging them out of the far off, remote locations they are usually in, and dragging them back home to our shop in Las Vegas that poses the real challenge.” While we aren’t at liberty to discuss where this particular F250 was found, we can share the details about what was done to the truck to make it come out they way it did. 

Even though the truck is a rare bird as-is, the first thing Riley and his crew at Hodson Motors did was cut it up. The rear fenders were stretched three inches wider and 6 inches longer, and F600 medium duty fenders were grafted into place up front, as was a front clip from the same truck. To give the roof another six inches of additional headroom, an F800 tall cap was worked into the equation. 

To further make the truck their own, Riley and his crew built a completely custom bed for the F250, and also installed a unibody big back window to help brighten up the inside of the cab. Now, you may be wondering where the heck these guys are able to source so many killer parts from obscure trucks. Well, let’s just say the guys have been doing some healthy hoarding over the years, and know exactly where to get more.  

When all the metal work was done to the truck, it was sprayed with a green primer and left that way for quite some time. The guys started getting used to that green color, and ended up mixing a custom gunmetal gloss green hue to finish it off while keeping the looks of it somewhat familiar.  

To increase the big look of the truck shell itself and give it that Hodson Motors classic touch, the suspension was lifted a full four inches all around. The original frame and axles were utilized in the overhaul, and the roll cage you see—it’s made from 4-inch pipe, not hollow tube, so it’s super heavy and damn near bulletproof. To capitalize on the taller ride height, a set of 20-inch Method NV wheels were selected, as was a set of 38-inch Milestar Patagonia M/T tires to ensure the truck was as capable to handle rough terrain and not just look the part. 

Powering the F250 is a Lincoln 460 big block with a few add-ons in the way of a Sniper EFI self-tuning fuel injection system, and a C6 transmission. The engine compartment is clean and tidy, and is designed so to keep function a top priority. Also designed with function in mind, is the F250’s interior space, although a ton of form has also been thrown in for good measure. Freshly distressed leather was used on the bench seat, center console, and door panels for an plush vet vintage looking appearance. As with all the builds that Hodson creates, a lineup of usual creature comforts in the way of Dakota Digital gauges, full air conditioning, and power windows were included to modernize the feel of the interior. 

Imagine what the forest rangers back in the 60’s would say about what has become of one of their old work trucks. The Hodsons work their magic time and again in order to dream up and build the type of trucks that are now directly associated with their name. If this Ford gives you any tingles (as it should), check out some of the other Hodson Motors’ creations, and be sure to stay tuned to their social accounts for future projects that will be sure to push the envelope even further. 

 

Hodson Motors’ Viper-Powered Jeep JRT10

Lifted trucks, classic trucks, rare trucks—if you consider yourself a fan of either or all of these categories, then you’ve surely heard of Hodson Motors out of Las Vegas, NV. Derrick and his son Riley Hodson operate their modest shop in the middle of the desert that houses parts and pieces from some pretty not-often-seen medium duty pickups from the past. Crew cabs that you never even knew existed are there, as well the other key ingredients required to create their insanely cool one-off machines. 

So the way Derrick and Riley operate is pretty simple—Derrick comes up with the grand ideas, and then brainstorms with Riley and lets him loose on figuring out how to make those ideas come to life. The guys have come to rely on a network of tightly knit shops to assist in their builds over the years, and in that time the Hodsons have amassed quite the personal truck collection, including this 1983 Jeep J10 that they affectionately call the JRT10. Derrick started on it seven years ago alongside local Las Vegas off-road fabricator, Cameron Chin, who owns and operates Nefarious Kustoms. Wanting to finally button up the build, they kept running with their vision of a rarely seen Jeep pickup model beefed up and customized to meet their specialized criteria. Also on the docket were a couple of imported tricks to make the J10 truly different from the rest. 

In the end, the time-consuming engine swap was well worth the effort just for the sake of saying that the Jeep now has an SRT-10 mill under the hood…

With an engine swap already in the stars for the Jeep, the guys narrowed the running down to a Viper SRT-10 engine. Yeah, that’s quite the jump, and a little more in-depth than Riley had initially anticipated. “The install was complicated”, he admits. “The firewall had to be chopped, and the radiator actually had to be relocated back to the bed if you can believe that. It just didn’t fit in the engine bay, so we had to run stainless tubing for the water underneath the truck.” In the end, the time-consuming engine swap was well worth the effort just for the sake of saying that the Jeep now has an SRT-10 mill under the hood—and, it lent a hand in creating a pretty catchy nickname for the truck. 

Since the Hodsons have been building cool trucks on a more frequent basis over the past six years or so, they’ve whipped up their own winning recipe that is applied to all of their projects, which always includes a killer suspension setup. The Jeep now sits on a full front and rear 4-link suspension system complete with a caged rear frame and Radflo long travel remote reservoir coilovers, so you just know this thing rides comfortably—even on the rough stuff. 

With the all-around lifted ride height, a healthy set of rubber could be thrown into the mix without any clearance issues. 37-inch Milestar Patagonia M/T tires were selected for their tried and true all-terrain exploration capabilities. While tires of this stature are commonplace in the lifted truck scene, so is the use of stock fenders, unfortunately. Hodson Motors has come to appreciate the importance of keeping proportion in mind when incorporating large tires, and to do that they like to go with larger fenders to keep up. To give the JRT10 correct proportional balance, AutoFab wide body fenders were utilized up front while the bedsides were widened six inches with fresh three-inch wider rear fenders to boot. Now, give the truck another look. All that extra bodywork makes much more sense when understanding the method to their madness. 

With the truck getting closer to paint, the guys started debating what color to have it sprayed. A specific Lamborghini color caught their eye, but it turns out they don’t typically release the actual codes to their paint—go figure. Instead, Matthew Miller of Nefarious Kustoms had to trust his eyeballs to match up an opal blue metallic pearl color that came pretty damn close to the Lambo shade. He then sealed it up with an eggshell matte clear coat, and blacked out all the exterior trim for good measure. The original front end was swapped out with a Gladiator Rhino grille conversion, and new LED lighting was wired up for updated looks and increased nighttime visibility. 

Other items that were scavenged from the SRT-10 donor were the black suede power bucket seats and dash cluster, which look right at home inside the Jeep. “All of our builds also feature what I usually refer to as creature comforts”, Riley adds. “These are just the common modern amenities such as power locks and windows, and air conditioning—all those little things that we enjoy in our daily drivers should be included in custom classic builds as well.” With the added Bluetooth stereo system, push button start, leather-wrapped steering wheel and dash, and a whole lot more, the cab space feels much more plush than one might expect from the Jeep at first glance. 

While the JRT-10 is a permanent part of the Hodson Motors collection, it does serve as a representation of what type of truck Derrick and Riley enjoy building and driving. If their custom trucks are good enough to make them happy, it’s a safe bet the ones they create for their customers will be finished off even better. If you’re looking to check out some crazy off-road rigs that perform just as good as they look, Hodson will surely scratch the itch of the uncommon utility truck fanatic.

The Cleanest ’75 Ford Bronco On Dirt

Jeff Godbold admits that his time owning this ’75 Ford Bronco surely hasn’t been the most exciting era the truck has ever seen. Actually, since its lengthy, in-depth rebuild, the Bronco really hasn’t been worked all too hard, but that’s mainly due in part because of how clean it has come to be. Jeff purchased the Bronco from the guy who invested the time to completely blow it apart and piece back together again with parts and products that would ultimately allow it to perform and look better than it has in its 47 years in existence. And who’d want to go and get those kind of results muddy? 

“I purchased the Ford Bronco completely done in 2012”, Jeff says. “The guy I bought it from was an older retired police officer, who spent several years doing most of the work himself. With the exception of waiting a couple years for the bodywork and paint to be completed, he did his part in pretty good time.” 

Time, in fact, was something that the previous owner put a large emphasis on. When he sold the Bronco to Jeff, he also included a rather extensive parts and cost list, as well as a well-organized log of billable hours that accounted for everything from the 13-hour engine and transmission rebuild job on 1/20/2009 right down to the 2-hour wash and vacuum back on 10/10/2005. Every other imaginable modification in between is also accounted for, as you could imagine, which is awesome to see actually. This very detailed record keeping has given Jeff a level of insight most folks don’t get when buying someone else’s project vehicle. 

High on the list of completed chores was the rebuild of the 347ci stroker engine that has all the bells and whistles any gearhead would flip over, and to capitalize on all the extra performance gains, Jeff added an overdrive transmission after he took ownership of the Ford Bronco to make it more freeway-friendly. Also on the logbook is a 2-inch body lift with all new mounts and bolts, as well as new American Racing wheels, center caps, lug nuts and locks and finished off properly with 33-inch Milestar Patagonia M/T tires. 

This ’75 is basically a brand new rig, and has been built to easily conquer rugged terrain, although it has only been assigned light duty work since its completion. Don’t go pointing fingers at Jeff for this, as the previous owner also kept the Bronco in the garage most of the time since he thought it turned out too nice to have to power wash every weekend. 

It’s just one of those rare gems that is a direct product of someone’s grand vision, and in this case fueled by a period of his absolute mania.

“We’ve towed the Bronco with our motorhome and driven it around some during our outings, but nothing too crazy”, Jeff admits. “I’ve also taken it to a car show, even though that’s not really my thing, but the response to it was nothing short of amazing”, he adds. Even though the Bronco has been equipped to handle the trails, the quality of its reworking has placed it in the show vehicle category, which wasn’t the original intent. Either way, there’s something to be said about owning a classic off-road truck of this caliber. It’s just one of those rare gems that is a direct product of someone’s grand vision, and in this case fueled by a period of his absolute mania. 

At the end of the all-encompassing parts and labor list is a grand totaling of just about $63k, which sounds about right. There may have been some other costs that slipped by the last owner, but he didn’t seem like the type to leave anything out. Jeff didn’t pay that much to bring the Bronco home, naturally, but in today’s current market for vintage Ford Broncos, this number sits somewhere on the low end considering the extent of its rebuild. With the release of the new 2021 Ford Bronco, there seems to be an undeniable uptick in sales of classic models that could be peaking right now due to timely nostalgia. That’s what we’ve come up with anyway, but that sure would explain the spike in resale value. 

You’d be hard pressed to find another Bronco that has been restored to this ‘75’s pedigree. There’s always new evidence to be found of it with every inspection, and of course when pouring through the list of modifications that has been compiled during its transition. Jeff has had quite a number of custom vehicles in the 25 years that he’s been into cars, and even though he might not drive the Bronco as much as any of the others, he has appreciated the time spent with it. 

The moment has come for Jeff to release the ’75 Ford Bronco into the care of another owner, and he can only hope it might get more use in the dirt as it is certainly equipped to handle it. On the other hand, he wouldn’t blame them for deciding to continue the tradition of keeping the Bronco as clean as can be. What would your driving habits be with this machine if you happened to find yourself its next lucky owner?

Click Here to view the 1975 Ford Bronco on Bring A Trailer.

Supercharged V8 Creates a Land Rover Defender Monster

Feb. 26 – Hefty V8s have been packing a punch in Land Rovers dating back to the 1970s, and the story continues with the new Land Rover Defender V8. This isn’t your run of the mill N/A V8, but a potent new supercharged V8, available in both 90 and 110 body styles. Iain Gray, Senior Manager, Powertrain Advanced Engineering, says “The 5.0-liter V8 supercharged engine further enhances the unique character of the Defender. It sounds fantastic and delivers incredible performance — providing new levels of driver appeal.” 

Speaking of performance, that 5.0-liter supercharged V8 in the Land Rover Defender produces 518 hp, and 461 lb-ft of torque. That power is delivered through an eight-speed automatic transmission. The Defender 90, or 2-door model, with the V8 package can accelerate to 60 mph in just 4.9 seconds, and sprint all the way to its top speed of 149 mph. Although extremely quick, and faster than any Defender model before it, the new Defenders aren’t just know for their speed. 

Inside the new Land Rover Defenders, you’ll find a unique suspension system, including bespoke spring and damper rates, and a new Electronic Active Rear Differential. This new technologically advanced equipment delivers more agile and engaging handling with heightened body control — you’ll also get to hear the lovely sounds of the supercharged V8. 

To continue on the Defenders exceptional off-roadability, Land Rover has introduced a new Dynamic program within the Terrain Response system. The program helps the driver exploit the more dynamic character and handling balance of the 518 hp model on tarmac and loose surfaces. In the setting, a sharper throttle response and bespoke tuning for the Continuously Variable Damping combine with the stiffer suspension for immediate steering response. 

Moving on to the looks of the new Defenders, the V8 models will be badged with unique emblems, while also coming with a distinctive quad exhaust and 22-inch alloy wheels. Another giveaway that the Defender is indeed housing a supercharged V8 is the Xenon blue front brake calipers and 15-inch brake discs. 

You’d better want to get your wallet ready for these prices, though. The base Defender 90 and 110 start at around $50,000, but as soon as you introduce the supercharged V8, you’ll be looking at a near $100,000 price tag.