Making a Statement in Steel and Patina:
Hodson Motors Ford F600 Dually

Say what you will about the patina craze we see at SEMA but the distinct weathered ‘n’ worn look just works on certain builds. The trend has come full circle as we’ve seen multiple examples of perfectly fine truck bodies get primered and scuffed up on purpose.

But the father and son duo at Hodson Motors in Las Vegas, NV handcrafts miracles out of the forgotten American iron from decades past. And just when you thought you have seen every iteration of Ford F-series pickup, this 1956 Ford F600 Crew Cab creation rolls in.

“We’ve had this truck for almost seven years,” son Riley Hodson jokes. “It’s always been the ugly duckling in the collection, always been a nightmare to drive. Now it’s excellent and fits in with our other trucks.”

…“the father and son duo at Hodson Motors in Las Vegas, NV handcrafts miracles out of the forgotten American iron from decades past,”...

EVs at SEMA 2022

The Electric Age is Upon Us

EVs were one of the major topics at the 2022 SEMA Show. With a dedicated space called “SEMA Electrified”, several EV manufacturers displayed their stock to modified creations. The all-new Ford Lighting was featured with an overland theme. And you can’t miss the abundance of Teslas sitting on air ride suspension.

SEMA 2022: Impressions

SEMA is Finally Back to Its Full Potential

You never know how much something will be missed until it’s gone, and the SEMA comeback continues with pent-up demand for the world’s wildest custom cars, trucks, and everything in between. After pandemic hiccups, 135,000 attendees this year pointed out that the show content and overall vibe felt as bullish as any before. Mix in a few hot platforms like the Nissan Z, the revised Toyota GR86, and exploding trends in the safari car, big truck, and offroad world, and all the ingredients for a killer SEMA Show were present.

The fiery Nissan Z is in high demand, and there were dozens of examples in all stages of modification. A few Z-cars already had widebody kits and high horsepower while many owners are still waiting for deliveries or suffering dealer markups nearly double the sticker price.

We can’t forget legendary platforms like the Mazda RX-7 FD, Subaru STi, Toyota Supra or the Nissan GT-R. Whether a current-gen or throwback creations like the all-carbon R32 GT-R that Garage Active shipped from Japan. This carbon fiber creation is over 1000hp from the HKS-equipped RB30 feeding a sequential gearbox. Their latest carbon fiber masterpiece misted with Midnight Purple paint was just stunning and only rivaled by Pagani V12-powered FD RX-7 that had us conflicted.

SEMA wouldn’t be SEMA without a battalion of lifted trucks, SUVs, and Jeeps in the outdoor lots. Whether built to be a mallcrawler or a legitimate overland contender, most were too pretty to run into a puddle. Every possible approach to truck modification was on parade, right on down to a tub -chassis old school Toyota 4Runner with a big-single 2JZ, a ‘Yoda widebody pickup with exposed suspension geometry, along with Domestic V8 rigs running monster tires and tank tracks.

The 2022 edition of SEMA hosted many driving demos in the lots surrounding the Las Vegas Convention Center and hosted a new Influencer Award that was bagged by photographer, Larry Chen. While the SEMA numbers appear healthy, we expect the current trends to be further boosted by dwindling gas prices and a stable economy.

SBN All-Female Bronco Build Graces SEMA 2022

The Ladies at SBN Show off their Hard Work

The 2021 Wildtrak Bronco is beefed up with Ford’s Performance EcoBoost power pack performance calibration, TurboSmart Kompact EM Plumb Back Valve VR19, aFe Power Momentum GT Cold Air Intake with a Pro 5R Filter, and AWE Tuning 2.7L Cat Back Exhaust suite.

For the chassis, it’s fully equipped with ICON Vehicle Dynamic’s 3-4” Lift Stage 8 Billet suspension system, Bronco Duster stage 3 Billet Aluminum Housing and Bushing kit, and Steersmarts Yeti XM Bronco Rear Adjustable Track Bar.

It features a custom designed and installed wrap done by Terra Strada Design. Equipped with Advanced Fiberglass’ 2” flare, 1” rise fenders, quarters and ram air hood, Baja Forged’s full-size Crawler front and rear bumpers with full size skid plate, Warn VR EVO 10-S winch, Factor 55 Ultra hook and Cascadia 4×4 Hood Solar Panel, Air Compressor, TRED Pro Recovery Boards and Jack by ARB; 37” Spare tire mount, Ford Accessories LockNLoad roof rack, Yakima Skyline tent, Ford Research and Advanced Engineering Lit Bronco Grille, Oracle Lighting, Brackets & Switches, and MEK Magnetic products.

As for the interior, it is furnished with Katzkin Seat custom leather seat covers, Goose Gear rear seat delete and icebox module with storage drawer, Ford Performance 50 QT Classic Fridge by ARB, all-weather floor mats, Molly bags, and In Vehicle Console Vault by Ford Accessories.

It rolls on ICON Alloy’s 17″ Satin Black Thrust wheels wrapped in the all-new 37” Milestar Patagonia M/T-02 tires. Tying everything together are McGuard’s Black Lug Nuts with a custom engraved SBN logo.

Products and companies that supported the build include Ford Motor Company, PPG paint (Paint Supplies), Seymour Paint (Undercoating Products), Summit Racing (Miscellaneous Supplies), Adenna PPE Supplies, TRAC Tire assistant products, UTI Long Beach, CA (Paint Facilities), MRT Performance (Facilities, Fabrication & Paint Supplies), 5 0’ Clock Garage (Build Support & Miscellaneous Supplies), SEMA Garage (CA & MI Facilities), and Duralast Battery donated by AutoZone.

Top Exotics at SEMA 2022

Sexy Wide Body Kits and Big Turbos

When it comes to The SEMA Show, exotic supercars are on another level. From body kits to twin turbos, these supercar builders push the envelope to stand out in a saturated crowd of stunning builds. There’s a bit, or should we say a lot, of everything for you to like here. Take a look at some of the supercars that grabbed our attention while walking the floors of the 2022 SEMA show.

Shop Talk With Demello Offroad: Navigating the Rough Trails of Small Off-Road Business

Jason Demello of Demello Offroad in Riverside, California is pretty much a household name in the Toyota off-road community. Today, the Demello brand offers bulletproof armor for Tacoma, Tundra, 4Runner, FJ Cruiser, select Lexus GX models AND the brand new Ford Bronco. Bumpers and sliders are Jason’s game when it comes to fabrication, and as far as suspension and installation goes, his team can handle it all at their SoCal location. From overlanding to rock crawling and everything else in between just happens to fall right inside of Demello Offroad’s all-encompassing wheelhouse.

Has it always been THIS good for Jason Demello though? Nope. Not even close. As what seems to be the story for most successful small businesses, trials and tribulations are prerequisite in order to make it on over to the sunny side of the street. Sure, there are always day-to-day operational obstacles to wrangle with but surviving just to face the problems of an established, profit-turning business is a struggle and right of passage on its own.

We had the opportunity and pleasure to chat it up with Jason, as he filled us in on his personal experience through the long days and longer nights associated with starting a passion-fueled business and keeping Demello Offroad afloat for so many years. You may have known bits and pieces of his story, but we were able to get down to the very bottom of where Demello Offroad all started and where its headed.

State Of Speed: Thanks for taking the time to answer some questions for us, Jason. First off, tell us about your experience during the first phase of starting Demello Offroad. 

Jason Demello: I started in my apartment garage in South Orange County but within two weeks, management served me a notice that there were multiple complaints about the noise I was making. Hindsight looking back, it was silly to think that would last. Those garages were meant for storage in a fairly new and rather high-end complex, and I was plugging in my 110 welder into the same outlet as the garage door opener. I learned where the breaker reset was real quick.

During that time I was working a full time job doing shipping and receiving for a small genetics start up company, and after hours I had to resort to bouncing around from the garages of friends and family who would let me work on my project. I cut all the material and bent the tube with my Harbor Freight bender, and frankly, those first three sets of sliders I made by hand were pretty bad—SO bad that someone on the TTORA (Toyota Tacoma Off Road Association) forum called me out for having piss poor welds and called me ‘amateur hours’, which I guess I was.

SoS: That’s harsh. How did you take that criticism? 

JD: It stung but that guy was right. I made the choice to then make the best, be the best and take criticism as a way to grow instead of allowing it to push me back. I also made weld quality my top goal, so I practiced day and night to get better. Often after work on a Friday night, I’d sit in 2+ hours of traffic going to San Bernardino where one of my first business partners (Frank) lived. He had a small garage at his house where we could work. I’d camp out there all weekend working non-stop from morning into the night building sliders and bed bars. Good friends like David Hale and Dan Lilo also helped make things possible by agreeing to work for lunch, dinner or whatever else I could offer for their time.

SoS: Teamwork does make the dream work, huh? What platform truck did you start out building for and what year was this all happening? 

JD: It was mostly Tacoma based back then in 1998-2000 even though these trucks were still relatively new in the off-road world. Most of the guys and companies focused on older Toyota trucks and considered the Tacoma a Camry with big tires.

SoS: So nothing for Chevy, Ford or Dodge trucks back then? 

JD: In those early years we experimented with S-10s, Nissans, Fords, and basically anything we were requested to make but I’ve always been a Toyota guy. I’ve always been familiar with them and if I don’t know something about a Toyota off the top of my head, I can usually find the answer real quick.

SoS: How long did you spend working in other people’s garages?  

JD: We got out first shop in 2002-2003-ish. I ‘clocked in’ there after work every day since it was now just down the street from my full time job. I even had one or two employees at the time cutting material all day or spray-painting sliders for me until I went full time in October of ’03 just after my son was born in June of that year. It was an exciting and tough time that’s for sure.

SoS: That is a big commitment going full time. What were some notable hurdles you ran into and what advice could you give to someone looking to turn away from 9-5 life to start their own shop: 

JD: Wow, there are so many hurdles! I don’t think small business is for everyone and I really wouldn’t recommend it for most people. You really need an advantage to get ahead and stay on top. You need family money, a house to pull money out of, a dad with knowledge, a dedicated shop space, tools—ANYTHING that gives you an advantage. I didn’t have any of those things. All I had going for me was being too dumb to know when to give up.

I once heard Will Smith say in an interview something about running on a treadmill. He’s so competitive, that if you were to challenge him to see who could run farther and longer, he may die trying to beat you. That’s how I felt about building stuff. I don’t know how to stop. I I know I’m not the best, and I make mistakes but was so lucky to be blessed with the ability to blindly go forward when working on something. 

It’s also worth noting that I had no shortage of good friends over the years that helped promote and build the business with me—I couldn’t have done it without them.

SoS: Sorry to focus on the bad times, but can you recall one specific issue that really knocked you back on your ass? You know, “the things that didn’t kill us, made us stronger” type of scenario?

JD: 2008 in general may have been the toughest notable problem. We were just hitting our production stride. The FJC had come out and we bought a new one in the hopes that we could make enough money off it to make the monthly payment. That vehicle blew up and we got slammed with orders. We moved into a bigger shop, hired more employees, took on more expenses and suddenly it was all cut off like the world had stopped turning overnight!

We had to make some tough choices, lay off important people at the shop and really had to evaluate what our shop space was going to be used for. I realized that I wasted a lot of time on my dream rock crawler and race truck projects I was never going to finish. I also didn’t need the lathe that still had no power running to it. I allowed myself one project at a time and sold everything else off. 

I also subbed out stuff instead of trying to bring it all in-house, which is a common mistake I see a lot of shops do. It’s tempting in the short term. It makes sense—even in the long term but the problem is doing it at the right time. I’ve seen really large companies in this industry go from 300 in-house employees to reducing to just a fraction of that in one day. We’ve hit many roadblocks, but this was the biggest eye opener for me.

SoS: So you’d say that 2008 was harder to deal with than the impact of COVID? 

JD: Yes and no. It was a great to have a surge in business during these last two years but it threw everything else out of whack. It permanently raised the prices of so much stuff in our industry. Customers think that we are making a killing because our prices keep going up but honestly looking around the room and seeing what everyone’s charging for similar products, we are all most likely losing money or at lease making less than we were before it all started.

SoS: So taking this into consideration, what would you consider is now Demello Offroad’s bread and butter items/services? 

JD: Bumpers for sure. We are trying to focus on installations because over our 20 years in business, we’ve seen a shift. In the beginning, we often offered free install because honestly people would do it themselves but now people want cheap and fast but they don’t want to get their hands dirty. Unfortunately we are seeing people buy cheaper products made overseas or offered by big box stores. I’ve seen this coming for a while, and I hope I am wrong but because of this we have been currently pushing installations a lot more and just carrying more products.

SoS: Well, folks are going to need a shop to install that eBay lift kit that didn’t come with proper instructions, right? What trends in the current marketplace do you particularly like/dislike and what would you like to see more/less of in the future?

DM: The trend of pushing Toyota towards being a follower and not a leader worries me. If you cut me, I will bleed Toyota but when I saw the new Bronco coming out, I ordered one over two years ago. I swear they took every complaint from a Toyota FJC and Toyota 4Runner owner over the last 20 years and built them exactly what they wanted—minus the reliability and symbol on the hood. We got our Bronco and honestly it’s a home run. I’m just jealous that Ford did this and not Toyota because I don’t see Toyota coming out with a real frame SUV with a removable top, front and rear lockers sitting on 35s, and with tons of power to spare. I mean the new 4Runner is nice but it still falls short of the Bronco in my opinion BUT reliability has its place too. I wonder how long that will play a factor though with warranties extending way out and people trending towards more features and caring less about reliability. I’m just curious where this will lead.

SoS: Ford did not play around with the Bronco release, that’s for sure. Well, are there any new products we can expect to see from Demello Offroad in the near future? 

JD: Oh yeah, rear 4Runner bumpers for ’03-current, rear GX bumpers, and finally a Tacoma rear bumper. Oh, and of course Bronco parts, which I am personally working on at home and on the weekends so I don’t cut into the production of new Toyota parts.

SoS: We’ll keep out eyes open for all of that freshness! Well, thanks for chatting with us for a minute Jason. Is there anything that we didn’t cover or something you’d like to add? 

JD: I’d just like you for the opportunity to tell my story. I’m not a large business owner with a huge bank account or big ego that needs stroking. I’m just another guy who likes to go off-roading. While you may go into an office everyday or we may have completely different types of jobs, we are still the same. So please, if you see me on the trails come say hi. I started doing this because I love everything off-road. I love the outdoors. I love meeting new people who enjoy the same as me. 

SoS: Thanks for keeping it real, Jason.

To stay up to date on product releases and news updates from Demello Offroad check in online at demello-offroad.com or give them a follow on Instagram @demellooffroad. If you prefer a live phone conversation, give them a ring at 866.333.6525 or if all else fails drop by at 12785 Magnolia Ave., Riverside, CA 92503. Either way, they’ll be glad to hear from you. 

Dirt, Mud, Sand & Beyond: Demello OffRoad’s Solid Axle Swap 2005 Toyota Tacoma

In the world of custom trucks, there’s basically no limit on what can be done. This goes for throwing parts, hours of labor and/or cold hard cash into a project. As a grand example of just what we mean, we reached out to Jason Demello of Demello Offroad in Riverside, CA to get a closer look at his very special 2005 Toyota Tacoma 4×4 double cab that he affectionately calls “Big Red”. 

Yes, this truck is quite big—and red BUT this truck is so much more than that. We had an opportunity to spend some time in the dirt with Jason to see what his Tacoma was all about because at first sight, it’s apparent that it’s not like the rest. “Long story short, we wanted to be the first to do a solid axle swap (SAS) on a new Tacoma back in 2005, so a ‘friend at the time’ bought a new truck and dropped it off at the shop”, Jason says. “We started cutting off the front suspension while it still had paper plates on. It was brought back to us in 2011 to add a rear 3-link, and we ended up acquiring the truck outright in 2020 with plans to give it a complete facelift, which it so badly needed.” 

Now, for those who are familiar with Demello Offroad as a company, you’ll know they specialize in the Toyota Tacoma platform, as well as 4-Runner, Tundra and FJ Cruiser and Lexus GX models. Jason started the business in his garage and continues to deliver bulletproof armor options as well as full off-road builds for enthusiasts and trucks of all levels from extremely capable overland machines to mall crawlers—and he does so without judgment, even in the latter direction. He just loves working on these types of vehicles, which is why he’s been at it for so long. 

…He just loves working on these types of vehicles, which is why he’s been at it for so long...

“The most frequent question I get asked from trucks owners is how much a truck like our SAS Tacoma would cost”, Jason admits. “There really isn’t a correct answer for that. What I do is counter their question by asking how much money they are willing to spend, and how capable they are of doing some of the work on their own. This Toyota is pretty extreme and it’s definitely not for everyone.”

Now, Jason will be the first guy to talk you out of wasting your hard earned money at his shop. “You don’t need a truck this crazy to go off-road”, he admits. “Hell, most 4×4 Toyota trucks and SUVs are more than capable of taking you places you never thought possible!” Now with that information in mind, do remember that even though ditching a Tacoma’s comfortable IFS suspension for a front solid axle swap isn’t exactly everybody’s cup of tea, Jason and other likeminded folks who are addicted to scaling wicked rocky terrain, gaining crazy front wheel articulation is of utmost importance. “The best advice I can give anyone is to build what you can and enjoy it!” 

What Jason truly enjoys is climbing rocks. That is clear to see with the Tacoma’s custom front and rear 3-link systems with ARB lockers, solid axle front and rear Currie RockJock 60 setups and a fully customized frame front to back, as well as the Marlin Crawler box, which just happens to be Jason’s favorite part of the build. “It really is cheating. The Marlin Crawler makes rock crawling so much easier and is a definite must-have.”

This Tacoma obviously screams that it can go anywhere it damn well pleases with ease, and to assist in that are the Patagonia M/T tires from Milestar. These rugged hunks of rubber are designed to conquer rocks, mud and dirt without missing a step. The more treacherous the terrain, the harder these tires work, which is a huge component in the Tacoma’s ability to provide pure off-road bliss. 

…This Tacoma obviously screams that it can go anywhere it damn well pleases with ease, and to assist in that are the Patagonia M/T tires from Milestar...

Now, when Jason took ownership of this truck, he planned on making it look like a completely different truck than before. The Tacoma was originally silver in color, but the fresh Toyota Radiant Red paint looks so much better on it. So do all the 2022 Tacoma panels from McNeil Racing. Of course, Jason made sure to showcase Demello Offroad’s own products with the new front bumper, sliders and roll cage that was finally finished up years after it was started years ago in the shop. “Our lead fabricator worked his magic on that cage I began back in the day, and together, I think what we accomplished with truck since we’ve owned it has created a whole new attitude that it was begging for”, Jason says of the job well done. 

As extreme and over-the-top as this Tacoma may be, it’s the exact truck Jason needed it to be to both as a visual representation that potential customers can see what’s possible through Demello Offroad, as well as an adventure rig that he can whip around on his free time and at expo events. Speaking of events, Jason has a great story to tell about the first time this Tacoma debuted back in 2005. 

“We had to roll the truck into the Off Road Expo that year due to a missing 3^rd link bolt, which was replaced at the last minute with a grade-5 bolt from Home Depot. That detail was forgotten about until the first time it was taken off-road at the Gate Keeper at Duran Falls in Calico, CA. The front axle broke loose when that bolt failed in front of a crowd of 100 people. Needless to say, we were embarrassed BUT it was a humble reminder to never overlook the ‘small’ things in any scale of truck build.” 

Milestar XPDN4 Cascadia: An Overland Trek Through Oregon’s Many Exciting Landscapes

Hyundai Previews the Future of Hydrogen Tech with the N Vision 74

With the world turning its back on combustion engines in favor of EVs, more and more people have grown concerned about EV range and the speed it takes to recharge. These same fears apply to EV motorsports, as recharge times and range directly affect the length of a race. In comes hydrogen fuel cell technology to the save the day. When hydrogen is mixed with oxygen it starts a reaction that produces electricity, which can then power the electric motors in a car, with only heat and water as a byproducts of the process. But the part that most people are interested in is that hydrogen can be stored in a tank like gasoline, and refueling takes about the same time as if you were refueling an ICE vehicle while providing the same range as a fully charged EV. Because of these attributes of hydrogen, Hyundai has been researching and developing hydrogen fuel cell tech, having started back in 2015 with the reveal of the Hyundai 2025 Vision Gran Turismo and the launch of the N brand. Fast forward to today and Hyundai has given us a glimpse of their R&D with jaw-dropping N Vision 74, the prototype used to experiment with the driving and cooling performance of advanced FCEVs.

While the N Vision 74’s brawny and boxy looks make it seem like it could’ve stepped out from a retro 1980’s sci-fi movie, its actually based on Hyundai’s Pony Coupe Concept from 1974. This design was penned by the legendary Giorgetto Giugiaro and was to be Hyundai’s first production sports car. Prototypes were even built for the Pony Coupe but sadly, it never reached production. The interior of the N Vision 74 also inherits the driver-centric, piston-shaped layout of the Pony concept, blending classic styling with modern touches, to enhance its motorsport functionality.

…Prototypes were even built for the Pony Coupe but sadly, it never reached production...

Hyundai calls the N Vision 74 a “high performance Rolling Lab” and for good reason, as its driven by Hyundai’s most advanced hydrogen fuel cell. All the futuristic-looking air vents and curvy yet rigid body panels aren’t just for show either, they significantly improve aerodynamics and fulfill the prototype’s heat management requirements, which is further improved by a 3 channel cooling system. The N Vision 74 puts power to pavement with two 235 kW motors on each rear wheel, making the prototype a RWD setup. Not only that, Hyundai tested a logic system called e-TVTM (electronic Torque Vectoring by Twin Motors) for improved cornering ability. The advanced hydrogen fuel cell tech allows the N Vision 74 to travel 600 km (about 373 miles) at a top speed of over 250 kph (155 mph), and can be refueled in about 5 minute, blowing EV charging speeds out of the water and rivaling ICE refueling times, perfect for motorsports and everyday applications.

…Prototypes were even built for the Pony Coupe but sadly, it never reached production...

The stunning N Vision 74 previews the near future use of hydrogen fuel cells as a green alternative to EVs. Can the N Vision 74 and other FCEVs compete with electric vehicles? Only time will tell.

Honda Reveals the All-New 2023 Civic Type-R

After riling up Honda fans with teasers and a full view of a camo covered Type-R, Honda has finally revealed the all-new 2023 Honda Civic Type-R. Based on the 11th gen Honda Civic Hatchback, this is only the second Type-R model ever sold in the US and the most powerful Type-R in its 30-year history.

The 2023 Type-R features a new light-weight and rigid body now referred to as the FL5, as opposed to the last generations FK8 chassis code. Powering this track-ready beast is a more powerful version of Honda’s K20C1 turbocharged 2.0-liter 4-cylinder V-TEC paired to an improved 6-speed manual. To accompany the changes the the chassis and engine, the exterior and cockpit have also been redesigned. The new Type-R is now longer, wider, and hugs the track closer than ever before. The front bumper features a more aggressive design with a honey comb grille mesh, and muscular fender flares and wider rear doors gives the new Type-R a more aggressive stance. The rear bumper and spoiler are also overhauled to produce better overall aerodynamics, downforce, and drag reduction. It will be available in 5 colors: Historic Championship White, Rallye Red, Boost Blue, Crystal Black Pearl, and Sonic Grey Pearl.

…the most powerful Type-R in its 30-year history...

The Interior features the Type-R’s emblematic red seats with suede-like material to reduce body slippage with Type-R badging throughout the vehicle. On the dash, Honda’s LogR™ data logger lets you keep track of real-time info on all the mechanical movements and vehicle behavior, and a new +R driving mode meter design brings all the driver-necessary info such as RPM, rev indicator lights, and gear position front and center.

Can the all-new Type-R keep up with the competition? We’ll have to find out once it launches later this fall!

Lifting Your Rig 101: What to Consider

When the manufacturer sets out to design and produce the latest model four-wheel drive (4wd) vehicle, they are required to balance many factors from vehicle weight to carbon footprint. These constraints force them to choose components that meet the desired platform goals but typically leave little room before modifications exceed the strength of the factory components. With an estimated +300 billion dollars being spent in the light truck and SUV aftermarket in 2022, its safe to say there are plenty customers looking to upgrade their 4wd vehicles and one of the first modifications most owners make to a 4wd after purchase is to add some type of suspension lift and larger tires.

For many, this is done merely for looks. For those who intend to use their newly purchased 4wd to take them on remote off-highway adventures or to tackle technical trails, a lift kit and larger tires is only the first step. What is soon discovered is that the additional tire size and weight create more stress on the suspension and drive axles. While most lift kit manufacturers take these additional factors into consideration during the development of the replacement suspension components, upgrading the drive axles for strength and performance is left up to the consumer to determine what and when.

For most the first step is to replace the factory ring and pinion (gear set) with one that provides a lower drive ratio. How low of a drive ratio you choose to install is determined by how you intend to use your 4wd. At minimum you want to install a gear set that lowers your gearing enough to match the final drive ratio your vehicle came equipped with from the factory. Matching the factory final drive ratio will return the performance lost by installing larger tires, yet in most cases it isn’t enough to noticeably improve the vehicles off-road capability. To do that we need to increase the torque being delivered to the tires as well as increase (lower) the vehicles crawl ratio. The simplest way to do that is to install an even lower ratio gear set. How low of a gear ratio you choose can often be limited to the type and model axles your vehicle is equipped with, but for most applications gears in the 4.56:1 or 4.88:1 (higher the number the lower the gear ratio) are the most common for vehicles with tires up to 37” diameter.

…additional tire size and weight create more stress on the suspension and drive axles...

Before you spend your money on replacing the axle gears, there is another upgrade to take into consideration that can be installed at the same time as your new axle gears. With few exceptions, the drive axles in your 4wd vehicle are equipped with an open differential. The differential is a component that consists of a carrier housing, that is driven by the ring gear, containing a set of gears known as spider gears which in turn drive the axle shafts. When traveling in a straight line the tires are turning at the same speed and equal power is transferred to both drive axles. However, when you turn, the outside tire has to travel a further distance than the inside. To accomplish this the spider gears inside the carrier, allow the outside tire to turn faster than the inside tire. While this design is great for most driving situations, it doesn’t lend itself to low traction situations because it allows the power to be transferred to the tire with the least amount of resistance. To increase a vehicle’s off-road prowess, replacing the factory differential with a mechanical traction control device, more commonly known as a locker can be extremely beneficial.

There are multiple options to choose from when it comes to lockers. The cheapest and most basic is the drop in or “lunch box” locker. The lunch box locker simply replaces the factory spider gears with specially machined interlocking components that engage (lock) when power is applied and disengage (unlock) when coasting. The design allows equal torque to be applied to the axles anytime the vehicle is under power. They are however only as strong as the factory cast iron carrier and are known to create erratic handling characteristics on pavement. Due to these characteristics, most people choose to only run them in the front axle which is typically disengaged when driving on the pavement. The next level up is the full case mechanical locker. More commonly referred to as the Detroit locker. These lockers replace the factory carrier and spider gears with a complete unit made from much stronger materials. The overall design functions similar to a lunch box locker and can lead to handling issues if used on the street. Most people choose to limit the installation of Detroit’s to vehicles that see very little road use. The most expensive option is the selectable locker. Available in electric, air, or cable actuation, selectable lockers give the owner the best of both on and off-road traction and handling. Similar to a Detroit, a selectable locker completely replaces the factory carrier. Once installed, they operate very similar to a factory open differential until the owner “engages” the locker. Once engaged, a geared collar slides into place and locks the differential creating equal traction to both wheels. Once the added traction is no longer needed, the driver can simply turn off or disengage the locker. Selectable lockers are most often installed in the rear, and are actually becoming more and more common as factory installed options on many current 4wd vehicles, but they work equally as well in the front axle.

Nissan 370Z: A Nissan Unlike Any Other

The Nissan 370Z car is one of those models that’s been loved for longer than I’ve been alive. It represents a company that responds to progress and continuously manufactures a car that transcends expectations. Ask any enthusiast and they’ll tell you a million reasons you should buy a Nissan Z. The car at hand is a 370z wearing Milestar tires, whose owner, Joe Velazquez, was kind enough to have a chat with me about his build.

Sarah Bernson (SB): My first question can feel a little generic but I find it can help get the storyline started, so…How’d you get into cars?

Joe Velazquez (JV): I would have to say that I have always been intrigued by cars. I grew up loving lowriders and muscle cars as it was common in my community. Up until the first Fast and Furious movie released when I was in high school. I then became infatuated with the import scene with limitless possibilities in customization.

…But the craziest memory is when I drove down to Arizona for a car show and my car wouldn’t start the morning of the show.…

SB: I think the natural intrigue we find is starting to burn out in the newest generation so I love to hear people say they’ve naturally been into cars for as long as they can remember. The import scene is super vast and certainly one of my favorite communities as well. There are loads of different cars under the import umbrella though. What made you ultimately gravitate towards Nissan 370Zs?

JV: After I got out of the military and moved back to SoCal, I started hanging out with other car guys and several of them also had Z’s. I really liked the body shape of the Z when compared to anything else in the scene. It really sets itself apart from everything else that was easily achievable. The body shape appears to be already widebody and the width of the wheels can be insane.

SB: Friends can be the best (or the worst) influence on us when it comes to car purchases. You get to get up close and personal with their car and so often you catch whatever car-virus they’ve got. Why’d you go with the Nissan 370z out of all the Zs?

JV: I actually went to a dealership to look at cars and I was undecided on what I really wanted before I showed up. After looking at several cars, I was dead set on my current red Nissan 370z. It just stood out when compared to a Genesis 3.0T or Evo MR. 

…I grew up loving lowriders and muscle cars as it was common in my community. Up until the first Fast and Furious movie released when I was in high school.…

SB: Sometimes the right car just hits differently. Like the Genesis and Evo are cool cars but I totally get what you mean. When you got the car did you have a vision for what it would become? What was your goal for the car?

JV: My goal was (and still is) to collect as many unobtainable parts for my car as possible. The more rare, the better. The harder to find, the better. Eventually I want to track my car for fun.

SB: Z cars are fairly abundant so looking for rare parts is totally a good way to separate yourself from the pack a bit. I’ve heard Z’s are a great platform for the track! What are your future plans for the car?

JV: I plan to find rare LMGT wheels and a NISMO mid logo steering wheel. The car itself is mostly complete with how I want it to look.

SB: Hell ya! Wheels make such a huge difference! It totally looks complete as it is though. Super sick! What would you say is your favorite design element and/or performance element of the car?

JV: I would have to say the handling of the car. I was hesitant about getting air suspension because I have been inside cars with terrible air setups. They sometimes bounce around too much and I felt like it might be more of a hassle when talking to others who had them. My air suspension setup is mixed with the full SPL components to make this car handle like a champ in the canyons.

SB: SoCal is known for incredible canyon roads and cruises. Of course, having the right setup is key for performance and safety. Do you have any particularly interesting memories with your Nissan Z?

JV: It’s a little hard to say what my favorite memory is. But the craziest memory is when I drove down to Arizona for a car show and my car wouldn’t start the morning of the show. I had to spend the entire event wondering why my car wouldn’t start. Luckily, a friend was with me. We had to push it up the U-Haul trailer the next day. It wasn’t easy since we needed a chain pulley to help us crank it up and the help of some friends and neighbors.

SB: Ugh! That sorta thing is the worst. I suppose that comes with the car territory though. I always like to ask people if there is anything else they want to tell me about their car, otherwise I feel like I’m manhandling the conversation a bit too much. So, am I missing anything?

JV: I would like to thank my friends at Garbage Dream for always supporting me, Concept 3 Performance for always taking care of my car, and my Nissan mechanic specialists @Zona_Z34 and @VQ_power. I would also like to take the time and thank @kuruzuauto for always keeping my car clean and detailing my car before every major car show.

Something that is entirely apparent throughout our interview is the way Joe not only connected with his Nissan 370Z , but how the car brought him into a rich community. He was inspired by his friends who had Zs, and later when things went rough, his friends were there to help. This story is a common one among car enthusiasts. All of our origin stories are unique of course, but I might go out on a limb here and say that we are all in this for the community almost as much as the cars. The cars are the medium that holds us all together and it’s really something beautiful.

Hodson’s Dodge DW300 Is an Art Masterpiece!

Over the last several years, the father and son team of Derrick and Riley Hodson of Las Vegas’ Hodson Motors have become synonymous with creating functional works of art from formerly ignored and often abused classic workhorse truck foundations. Combining body parts from light, medium, and heavy-duty trucks and blending them in such a way that is easily overlooked as stock by the casual observer, the team have developed a formula that has proven hard to beat. Their latest is a 1968 Dodge W300 Crew Cab that has taken their build style and pushed it to a whole new level.

Instead of starting from scratch on this project, the Hodson’s started with a partially finished project that the former owner had already invested a considerable amount of time and effort into, creating a solid drivetrain as the foundation to build off of. Starting with a rare 1968 Dodge W200 ¾ ton Crew Cab truck, the former owner installed an early Superduty Dana 60/ Sterling 10.5 axle combo slung on the same era Superduty leaf spring suspension, utilizing custom mounts front and rear. Under the hood he installed a tried and true 5.9L 12 valve Cummins mated to an NV4500 and a divorced NP205 transfer case. It was at this point that Riley purchased the project.

Evil 1956 Jeep Willys:
The Ultimate Off-Road Adventurer

There comes a time in one’s life when “fitting in” takes a back seat to being unique and truly different than the rest of the pack. Pat Soffe (@offpvmt) of St. George, Utah found himself in this exact category while figuring out what vehicle to build. His major prerequisite was one that could keep up with his off-roading, rock crawling habits—but that all changed before he even began.

…Just make sure to measure the height of the door before you get started though…

As the sun started to set on Pat’s time with his 2001 Jeep XJ, he began weighing the pros and cons of building a newer Jeep—a JL. Unfortunately, the cons quickly posed a very real sign to go into a different direction. “The first deterrent of building a new JL was the price of a new JL”, Pat admits. “Purchasing a brand new stock condition vehicle that would need so much additional money invested to match the capabilities of our old Jeep was just too cost prohibitive.”

With the towering monetary barrier causing Pat to find another way forward, he began scouring the used JL market, but was soon hit by another block in the path. “We took our old XJ to three JP Magazine Dirt & Drive events among other meets throughout the years, and something that kept telling us to stray away from going with a Jeep JL was that literally EVERYBODY else had a JL. I wanted something that would get noticed and stand out.”

While Pat still didn’t know exactly what kind of rig to build next, he did start watching past Four Wheeler magazine’s Ultimate Adventure videos in hopes to find nudge in a certain direction. “I was going through hours of coverage to get some bit of inspiration, and then there it was”, Pat says excitedly. The vehicle he spotted was a 1949 Willys truck, and it belonged to JP Magazine’s own Verne Simons. “I was instantly hooked. I soon found myself literally taking screen shots of as many photos as possible of Verne’s truck. As luck would have it, I had a chance meeting with Verne at the Lucas Oils Off Road Expo in Pomona, California. It was that exact moment that solidified my decision to build a 1956 Jeep Willys truck.”

With the big picture crystal clear in his mind, Pat soon embarked on his own Willy’s build—starting with a 1997 Jeep TJ frame. “We literally started with a blank slate”, he says. “The humble beginning allowed for the build process to move ahead rather simply.” First, that TJ chassis was stretched at the top of the rear axle rise and extended 42 inches to provide a proper place to mount the bed, as well as obtain a 118-inch wheelbase. The front Dodge Dana 60 Kingpin and the rear GM 14-bolt axles were then built up before the custom front 3-link Skyjacker suspension setup, as well as a rear 4-link system that both feature TJ 2.5-inch dual rate springs and ADX reservoir shocks were assembled.

To handle the terrain shredding, rock climbing duties Pat was after, he selected a set of TR Beadlock HD17 wheels and 40×17-inch Milestar Patagonia tires that are well known for their established prowess out in the wild. So far, Pat’s Willys project was showing some real promise while on the ground floor. Next, he would begin the process of finding an adequate power source to fuel the level of adventure he had in mind for his soon-to-be assembled pickup.

Pat could’ve run with many different engine options but he ultimately chose a 2002 GM 5.3L LS power plant, as well as a Monster TH400 transmission to propel his truck through the elements. The LS provided modern reliability, as well as more than enough horsepower and torque to get him out into the great wide open and back home again. To keep the engine cool even during the hottest day in the desert, a Champion 3-row aluminum radiator with a Spal fan was selected, which is actually a Jeep CJ V-8 conversion that fit the bill perfectly.

…The first deterrent of building a new JL was the price of a new JL…

Now as far as the ’56 Jeep Willys truck cab, front end and bed, Pat didn’t do a whole lot to prep it for installation onto the frame. The natural 66-year-old patina, which is impossible to duplicate otherwise, was left in place as a nod to the experience this truck has seen in action. Pat did include many new conveniences to the Willy façade in the way of a front and rear bumpers, a Warn winch and a whole arsenal of Rigid LED lighting, which is required equipment for the environment Pat tends to frequent.

Next, the interior space within the cab was completely Raptor lined before it was outfitted with a set of Corbeau Baja XP seats, light gauge sheetmetal door panels and aircraft style toggle switches. The Willys’ cabin is comfortable enough to allow Pat to navigate his truck through some pretty rugged terrain without feeling like he was roughed up too badly at the end of the day.

Now that we see a physical manifestation of Pat’s latest rig build, the many questions regarding the ‘how’s’ and ‘where’s’ behind the project begin to surface. While he does have some fabricating experience, he didn’t put the truck together at a professional shop. “This truck was built in its entirety in a two-car garage”, he says proudly. “While I did have some know-how to go on, not so much with our old XJ, which was put together with mostly off-the-shelf parts, I never put together anything of this magnitude before.”

Once the dust settled, Pat begin to look right where he started to prove that his creation was ready to take on the Ultimate Adventure—the very event that gave him the inspiration to put the truck together in the first place. While he was told that the unique and not-often-seen trucks are usually selected to participate in the event, his truck was not chosen the first time he applied. He did, however, get in on it the next year. “It truly was an adventure of a lifetime”, he states. “During the entire 6 days of the event, we only encountered two problems—a rock hole in the trans pan and a shorted wire in the ignition switch. It was great to see how it performed in the event that ultimately pushed me to build it.”

Pat did share with us that his first real trip in the truck (even before the whole Ultimate Adventure experience) was a rip through the famed Rubicon trail, which he completed in one day—14 hours. The truck was mostly untested at that point, but he just had to get out there and match his build up against the realest of proving grounds.

“I couldn’t have made it to this point without seeing what Verne Simons did with his Willys truck first”, Pat says with great pride. “Once I got started with my truck, I gathered a lot of support from some very awesome manufacturers. A huge THANKS goes out to Milestar Tires, Skyjacker Suspension, TR Beadlock Wheels, Motive Gear, Rigid Industries, PowerTank and Warn Industries. Here is proof that you too can build a legit rock crawler in a two-car garage. Just make sure to measure the height of the door before you get started though.”

Rivalry Resurrected at State of Speed LA: BMW VS. Mercedes

Summer is here and the heat is turning up, at least at Mays State of Speed LA where the age-old “BMW VS. Mercedes” was being contested once again. There were plenty of sick builds representing both sides, from classics to modern rides. While the theme this time was Mercs vs. Bimmers, they weren’t the only types of cars out for viewing pleasure. There were other EDM manufactures, muscle, and of course JDM.

…they weren’t the only types of cars out for viewing pleasure. There were other EDM manufactures, muscle, and of course JDM…

A big thanks to all who came to participate and those who came to enjoy the amazing cars on display. Stay tuned for the next State of Speed LA car show, we hope to see you there!

The Birth of An Industry: ’46 Jeep Willys

Mike’s One-of-a-Kind Bosozoku Van

Mike’s van is one of those vehicles that literally everyone has an opinion on. Not just car enthusiasts because it’s fairly uncommon to see a RHD vehicle in the states, more uncommon to see a Hiace and obviously a one time event to see Boso-style Van like this one.

Mike imported it basically as-is from Japan so it fits in with the “vanning” style over there a lot more than some of the vans that were built over here to mimic the Japanese machines. This one is as real as they come.

Bosozoku style is loud, colorful, and strange. It translates to “running-out-of-control” and originated in the ‘50s when gangs of young people would drive around recklessly with bikes and cars that were flashy and strange enough to draw everyone’s attention as they did it. They wanted to be seen defying the laws and their vehicle was a huge help.

This subsect is known as ‘vanning’, and while some vans clearly pull from the visuals of Bosozoku, they’re a super niche sector that doesn’t even fully conform to Boso criteria. Some of the vans have been used by Bosozoku gangs for transporting bikes on longer rides, particular to meets and shows. Even though they are closely related to Bosozoku they are still viewed to be part of vanning as a primary definition.

…It translates to “running-out-of-control” and originated in the ‘50s when gangs of young people would drive around recklessly with bikes and cars that were flashy and strange enough to draw everyone’s attention…

Something that seems to separate Japanese car culture from others is that they are more collectivist and it shows in the way they build vehicles. America lands a 91 on the individualism scale, being unique matters greatly here, demonstrating who you are matters here and we use every outlet from pet, to shoe, to car to tell the people around us who we are and how we differ. We want to seem and feel special. Japanese culture has similar style sectors but you seem to see more strict rules played out throughout the modification process in order to maintain group cohesion.

When I approach a story I usually ask myself what does this car say about its owner or how is it unique, what is the covert meaning? When I asked myself the same question of this van it was clear that it wasn’t designed to say a lot about its owner but it was designed to compliment and contribute to the vanning culture at large.

The primary purpose of these builds, it seems to me, is a sense of culture and group cohesion. On their own they seem outrageous and unique but when a group gets together, a true spectacle is made.

…it wasn’t designed to say a lot about its owner but it was designed to compliment and contribute to the vanning culture at large…

Seeing Mike’s van over here is super out of place and that makes it perfect for American individualism. Vanning builds community in Japan and shows uniqueness in the states, it just goes to show how car cultures evolve and change and grow as they cross borders.

I think I’m not the only one who would love to see a Japanese-style close-knit Vanning club put down roots on this side of the ocean, but for now Mike’s will have to fly solo.

History Of The Dodge Charger: A Quick Look

Many muscle cars of the 1960’s all share a very similar story. While this decade is commonly referred to as the golden era of these fast, flexing street machines, there was a literal war between the companies designing and subsequently serving these cars as hot as possible to feed the market’s insatiable need for speed. 

The Dodge Charger wasn’t the first of these cars types to emerge from the drawing board. In fact, its very existence came in hopes to steal a share of the muscle market from General Motors and Ford, which had already achieved huge success on the streets with the 1964 release of the Pontiac GTO and Ford Mustang respectively. The younger audience that was buying these cars was hopped up on adrenaline, constantly scanning the horizon looking for the next big hit. In 1966, Dodge was there to enter a new horse in the race. 

The Charger came out sprinting to catch up to the frontrunners with four different V-8 engine offerings, one of which was the much-anticipated 426 Street Hemi mill. While the Dodge Charger displayed a strong initial showing during its first year of production, a slower-selling 1967 prompted the company to act fast. What happened next was an alteration to their approach in hopes to remain a viable competitor to the industry’s leading performance models. 

Little did Dodge know the impact said changes would make for the Charger’s second-generation success. At first glance, everyone who laid eyes on the car’s fresh redesign knew right away something big was about to happen. The sleek Coke bottle shape and integrated rear spoiler made the car look fast and capable before the key was even turned. Even today, the ’68-’70 Charger (namely the ’69) remains one of the most recognizable silhouettes in automotive history, as it has been forever immortalized with its multiple big screen appearances. 

…The sleek Coke bottle shape and integrated rear spoiler made the car look fast and capable before the key was even turned…

Backing up the Charger’s aggressively updated appearance, Dodge designated four big block V-8 powertrain options available for the coupe. The mild, entry-level 145-hp 3.7L I-6 was enough to make new-to-market drivers happy, but for the more wild at heart, two big V-8 engines were lying in wait to exponentially make things far more interesting. Buyers had a hell of a decision to make when starting at the 7.0L Hemi or the 7.2L Magnum power plants, but there was surely no losing with either selection. 

The third generation of the Charger received a second package redesign that was right on par with the looks of many other vehicles of the 1970s (think overly curvy), but lacking a longer lasting appeal that the previous gen had going for it. It was during this time that the Charger tells a shared tale of woes of other performance vehicles in the industry. Increasingly rising insurance premiums and gasoline prices proved to be major threats to the muscle car species as a whole. If that lethal combo wasn’t enough to take them out, the upcoming federal emissions regulations was sure to be certain death for their kind. 

Thankfully for Dodge, the Charger was still able to eek out some semblance of an existence until the end of the 1978 model year when it was taken out of production. Before the plug was pulled on it, the Charger had somehow appeared in the personal luxury car category. For the first time in the car’s history, performance output was not placed at center stage, and to be honest, neither was its styling with regards to today’s standards. The writing was definitely on the wall for the struggling Charger. 

…Increasingly rising insurance premiums and gasoline prices proved to be major threats to the muscle car species as a whole…

After the release of a Charger R/T concept car in 1999, which received good enough reviews, there weren’t any more whispers of the sleeping giant’s name in public again until 2005 when Dodge legitimately rereleased the car as a 2006 model year. The first question on everybody’s mind was quickly answered with authority—yes, this car was worth the wait! 

Even though there was some grumbling from a small sect of Charger ultra purists, the sedan version didn’t look bad—not at all. Even those who had something to say about the car’s extra two doors remained quiet when learning about the Charger’s top-end 6.1L Hemi V-8 SRT8 model—425 ponies and 420lbs-ft of torque will do that. 

A major overhaul came in 2011 for the Charger, which notably included aggressively restyled bodywork and a 6.4L Hemi-equipped SRT model. The car continued to evolve with the introduction of the SRT Hellcat model four years later. The Charger claimed a lot of bragging rights under this badging with the inclusion of a supercharged 707hp 6.2L Hemi attached to an 8-speed paddle-shifted ZF auto transmission. Yeah, those are big numbers, especially for a five-passenger sedan.

 It’s safe to say that 56 years after its inaugural release, there’s never been a more exciting time to own a Dodge Charger. 

JDM Classics take the Spotlight at State of Speed Los Angeles

March’s State of Speed Los Angeles event was presented by Milestar Tires and was in collaboration with Sonkei Blue Social & OCJM, so it was a special one to say the least. The chosen theme was Japanese Classics, which usually make a pretty big appearance at the meets, but this time around the organizers wanted to specifically highlight that collector community. 

While the cars were the centerpiece, hanging out with friends while sipping Commodity Coffee and eating vegan donuts was, as always, equally important. 

…hanging out with friends while sipping Commodity Coffee and eating vegan donuts was, as always, equally important…

The cars that were spotlighted needed to be 20 years or older. Some incredible examples made the early morning trek out which can be seen in the gallery below.  

The Hot Wheels race track (which has made appearances before) was brought back out for the event and was a total hit with kids (big and small). By 7:30 a.m the whole lot was filled up and the event stayed full and energized until the very end. While Japanese classics were the main attractions, great examples of American muscle, exotics, and everything in between came out.

State of Speed continues to attract consistently high quality vehicles and an ultra- enthusiastic crowd. They plan to continue to host themed events and collaborations for the remainder of the year. Their next spotlight is expected to be BMW v. Mercedes and won’t be one to miss.

A Quick-Hitting History Of The Chevrolet Impala

Chevrolet’s Impala is an iconic nameplate that has been around since 1958 until 2020 when it was yanked from production for the second time. Throughout the years, and 10 generations later, this car has seen its fair share of restyling and reconfiguration to fit in with the auto industry’s ever-changing climate. 

First introduced to the world as the Bel Air Impala, the name itself designated itself as the top-of –the-line trim package for Chevy’s well-established, deluxe full-size car line. While the first example of the Impala was built to commemorate Chevy’s 50^th anniversary, it gained enough traction to become a stand-alone production model the very next year. 

Car fans fell in love with the styling of the ’58 Impala with its wide yet sleek appearance, but the factory quickly tweaked its appearance to give it a fresh identity that was all its own. In its second year and generation, the brand new Impala line featured exterior tail fins and teardrop shaped headlights, and sat atop of an X-frame chassis that promoted a lower ride height and had great structural integrity. The Impala was made available in multiple body variations such as a two-door hardtop or convertible and a four-door hardtop or sedan—the options were plentiful. 

While the Impala was quickly gaining popularity in its first couple years on the street, it wasn’t until the very start of the third generation in 1961 when things really got interesting when the release of the Super Sport performance package was first made available. While the SS model was available with many powertrain options to choose from, including Chevy’s brand-new 409ci 360hp V-8, which really allowed the Super Sport designation to live up to the hype. While upgraded performance gains were the major reason consumers opted for this premium badging, its many plush interior features and heavier-duty chassis components were also just as desirable. 

The exterior packaging changed again during the Impala’s third generation, and overall, the car became boxier than before. The new look of this particular redesign has had long-lasting power and is one of today’s most popular selections for restorations and full custom rebuilds throughout the car’s history. You’ve most likely seen Impalas of this vintage cruising in music videos or heard about rolling in a ‘six-four’ on the radio a time or two before. 

…this particular redesign has had long-lasting power and is one of today’s most popular selections for restorations and full custom rebuilds…

While the fourth generation saw its own redesign, which brought a more sleek and modern aesthetic to the Impala’s exterior, it also represented the car’s seeming most popular iteration to date for car buyers of the era, as it sold over a million units alone in 1965. Another interesting happening during this generation was the dropping of the availability of the wagon option in 1969, which had been a great family-friendly package from ’65-’68. 

During 1971-1976, the Impala once again went through another major appearance overhaul, while still offering the outstanding comfort and interior space consumers had come to associate with the nameplate. It was also during this time that the Feds began cracking down on emissions regulations, which in turn directly led to dramatically lower performance offerings being made available. These limitations were not specifically unique to the Impala, or the Chevy brand for that matter—the strain was felt all throughout the automotive industry.

…It was also during this time that the Feds began cracking down on emissions regulations, which in turn directly led to dramatically lower performance offerings being made available…

After going though yet another repackaging starting in 1977, the Impala’s sixth generation saw the car’s retirement from production in 1985. The premium Caprice package trim, which had proved to be popular in years past, began outselling the Impala as a sports coupe, yet the sedan Impala was still a popular selection for families during this period. Either way, the Impala was out, and the Caprice was given a chance to run as its own model.  

When the Impala became a fond memory, there were no plans to bring it back until almost a decade later in 1994. This 7^th generation only lasted two years in production, but since this release was strictly an SS model equipped with a decent 5.7L 260hp LT1 power plant, critics weren’t overly thrilled with the four-speed automatic transmission that was made the only option available. While the upgraded suspension setup was praised, however, this version didn’t have the right moves to hold the market’s attention for long. 

After being sidelined yet again, the Impala took another breather for another four years until it was revived again in 2000. This time, it remained on the street until it was recently canned once more in 2020. This most recent run spanned two whole decades that proved to be rather influential throughout the years as it hung around at the top as Chevrolet’s luxury full-size car offering. 

Many wonder if the Impala will make yet another return. It’s hard to count this car out, as it has been sent to pasture multiple times only to be roped back into production rotation. If the car does come back, it’ll be interesting to see what it will look like and what kind of new features it’ll be flexing. If the Impala does remain in extinction this time, it will remain near and dear in the hearts of millions of car enthusiasts.  

Then & Now: A Quick Look At The Dodge Challenger’s Past & Present

With so much buzz given to the Hellcat and Demon trim packages these days, it sometimes seems like there is somewhat of a disconnect from the Dodge Challenger of the early 1970’s. While the level of excitement surrounding the modern muscle car currently sits at an all-time high, the beginning stages of Dodge’s entry into the pony car scene some 52 years ago weren’t much more than hopes based on performance-centric auto market predictions.

Introduced to the market in 1969 as a 1970 model, the OG Dodge Challenger showed up as the new kid on the block to those into manufacturer-tuned performance cars. With the Ford Mustang and Chevy Camaro already well established names during the golden era of the American muscle car segment, the Challenger was originally designed to be a worthy and capable stable mate for Plymouth’s Barracuda to help take on the competition.

…the Challenger was originally designed to be a worthy and capable stable mate for Plymouth’s Barracuda…

While the Challenger did its part of raising awareness of Chrysler-branded performance cars, it also simultaneously carved out its own devout fan base rather quickly in its short production run. When it was first introduced, the Challenger won so many consumers over based on the sheer amount of customizations available to buyers at dealerships nationwide.

The Challenger boasted a wide range of powertrain selections to admire from a modest 225ci 144hp inline six engine to a 440-cubic inch 390hp V-8 power plant, the car was made available in a total of nine total engine configurations to perfectly suit the many types of owners looking to bring one home.

To build upon the Challenger’s generous powertrain menu, the first generation was originally offered in either a two-door hardtop or convertible model with trim packages ranging from the base platform Special Edition (SE), mid-level Road/Track (R/T), and a limited edition Trans-Am (T/A) model that was one of the first production vehicles to offer staggered front and rear tire sizes while meeting the qualifications for legit Sports Car Club of America (SCCA) Trans-Am racing. The Challenger also had one of the most impressive number of color palettes in the industry of paint codes to select from as well.

It was an exciting time for Chrysler, and even more so for fans of the Challenger specifically. The car’s appeal to gear heads, as well as to folks simply looking for a sporty car to drive was nearly immediate. But like all good things, the Challenger’s future was snuffed out all too quickly in 1974. The hike in insurance premiums during that time, the creation of the Environmental Protection Agency (EPA) in 1970, along with a worldwide gasoline crisis going on in 1973, the carbureted muscle car industry was hit blow after blow, ultimately resulting in one challenge the Dodge Challenger just couldn’t overcome.

It wasn’t until 2006 at the North American International Auto Show in Detroit that a sign of the Challenger’s possible resurrection was made public. A concept vehicle based on the styling cues of the first generation and presence of a 6.1L HEMI engine under the hood, went over better than expected, and eventually led to yet another production run in 2008 due to overwhelming demand. The Dodge Challenger was back on the streets—kind of.

While only a limited number of high-end, fully loaded SRT8 models were made available in that first year back, not everyone who wanted a new Challenger could get their hands on one. 2009 proved to be the car’s full return to consumers looking to buy one according to their preferred specifications. Muscle car admirers were once again able to hop back into the driver seat with a base model SE equipped with a 3.5L 250hp V-6 with the option to upgrade to a R/T package complete 5.7L 375hp HEMI engine with even more options and performance add-ons to select from.

…2009 proved to be the car’s full return to consumers looking to buy one according to their preferred specifications…

Throughout the years, the Challenger became available with more aggressive HEMI packages, but found itself becoming overshadowed by the competition, namely Ford’s Mustang GT500 and Chevy’s Camaro ZL1. Dodge’s response to potentially being hopelessly overpowered by these cars was its release of the SRT Hellcat—a car equipped with a 6.2L rendition of the Gen III HEMI that was teamed up with a 2.4L twin-screw supercharger to produce 707hp and 650-lb fit of torque.

This escalated the Challenger to the top of the heap, but in an effort to remain ahead of the pack, the same 6.2L HEMI found in the Hellcat was blessed with a larger 2.7L supercharger, along with a suite of upgraded engine components to make for the 808hp nucleus available in the notoriously powered SRT Demon package that was limited to only 3300 units.

For 2022, there are a total of nine different Dodge Challenger trim levels topped off with two high-end cars—the SRT Hellcat Redeye and SRT Super Stock premium models. The Challenger still remains attractive to a wide audience, from the entry-level 303HP V-6 AWD package to an 807hp rocket in the Super Stock trim that thrives on 91-octane pump gas.

It’s safe to say that the Challenger remains a crowd pleaser to this day more than 50 years after its original release. Even with the plug being prematurely pulled back in ’74, the legendary car has sat through a decades-long hiatus and has come back swinging for the fences.

Hodson Motor’s 1965 Jeep J60 Dually:
One of a Kind, One at a Time

You’ve seen their trucks before (and are most likely obsessed with one or all of them if you’re anything like us). Their personal collection of insanely cool, larger-than-life custom pickup creations are definitely labors of love, and each one is an example of equal parts creative vision, healthy obsession and attention to detail and purpose.

Of course, we’re talking about the legendary father/son combo Derrick and Riley Hodson. The Hodsons call the outlying dessert landscape of Las Vegas home, which is just far away from the bright lights of the big city to give them all the peace and quiet they need in order to dream up these large-scale truck build before getting down and dirty bringing them to life.

Classic, rare medium-duty trucks are the Hodsons’ forte, and over the years, they have truly developed a design perspective that is uniquely their own—you’ll know a Hodson truck when you see it. The truck itself will be an industrial-grade pickup of some sort that wasn’t meant for the everyday consumer to hold the keys to, but that’s half of the appeal. Once the guys zero in on a truck they want, they located it, dig it out of its long-time place of rest, and apply their own special sauce to the equation. So far, this process has yet to let them down.

…you’ll know a Hodson truck when you see it…

Even though Derrick and Riley specialize in legitimate medium-duty trucks, they also like to drive the trucks they built—otherwise, what’s the point, right? To allow them to have a get more seat time behind one of their own creations, they sat down and developed what they now affectionately call the Jeep J60—essentially a 4-door J10 pickup. If you’ve never heard of this particular model before, don’t fret—it has never existed. Well, until now.

This particular project was designed to be more of a real-world daily driver. Now, don’t get us wrong—each and every one of their builds is painstakingly designed to function well on the road. Broken down, the Hodson’s Jeep J60 consists of a Jeep Wagoneer 4-door that has been sliced at the back of the cab and sealed up with the back wall of a J10 pickup cab grafted in. The rear doors received a great deal of metalwork to further give this creation the appearance of a true 4-door pickup.

…each and every one of their builds is painstakingly designed to function well on the road…

The front of the cab features a 60’s-era Gladiator grille that resides front and center, as well as wide front fenders from Autofab. The rear features a custom bed, a big side step tailgate, and step side fenders that have been widened a whopping 10 inches! The paint color of choice that makes all those cool customizations gel in complete harmony is Ford Raptor Lead Foot grey—and man, does it look good.

Paint isn’t the only Ford component to be incorporated into the creation of the J60, however, as the full-custom body was laid atop a 2004 Ford F450 dually chassis complete with a 6.0 Powerstroke engine and 5-speed automatic transmission. This truck sounds just as good as it looks with that big diesel rumbling underneath the hood, and to give the truck the oversize appearance that is synonymous with all Hodson trucks, 22-inch American Force wheels covered in 37X13.50R22 Milestar Patagonia X/T tires were bolted into position. The roll bar the guys went with is as burly as it looks—even more so, actually. While a lot of roll bar setups are fabricated out of hollow tube pipe, the stuff used here is solid through and through.

Hopping up into the cab is made easier with AMP Research Powerstep running boards, and with just one glance inside the cab, you’d be blown away by how clean the interior space is. Black and grey upholstered seats and other paneling from TMI Products helped make all the difference in updating and upgrading the entire confines of the J60. Creature comforts are never spared in any of the Hodson one-off pickups. While this truck already boasts an impressive lineup of high-end amenities, the guys wouldn’t dare one of their projects be considered finished without Dakota Digital gauges, a full audio system, power windows and door locks, and of course, ice cold A/C.

While the J60 is hardly alone as the single shining star in the deep Hodson stable, it does stand as one of their favorites. This truck does get a little more road time than some of the others, but that was the point of building it. Unless the guys are just planning to go for a cruise without making many (if any) stops, any selection from their lineup would do just fine, but the J60 has been dialed in to give them everything they love to put into their projects, in a slightly more compact package—even through there’s really nothing small about it.

Five years have been invested into this build, and a talented supporting cast in Nefarious Customs, 6651 Customs, Airth Defined, Cheyenne Ruether, Jeeprecyclers.com, and more were sourced to bring it all together. Trucks like these don’t just appear out of nowhere—they require a lot of imagination, skill, patience, and a sh*tload of parts.

2022 King of the Hammers

Taking on the Toughest Off-Road Race on the Planet

What started as a “beer bet” between friends on a dry lakebed in Johnson Valley nearly 15 years ago has grown to one of the biggest weeks of off-road racing in the world: the Ultra 4 King of the Hammers (KOH). The people are just as spectacular to watch as the vehicles. KOH is a week-long party—imagine Burning Man with the excitement of off-road racing. 

The initial premise was simple, blend rock crawling with high-speed desert racing. KOH requires race vehicles that can handle both terrains. The racecourse seems impossible to those unfamiliar with the race, pitting man and machine against a course filled with rocks the size of a city buses and drop-offs over 10 feet tall.

Weeks before, HammerKing Productions employees and volunteers descend on Means Dry Lakebed to build Hammertown, a 56-acre, high-tech camp. It’s the center of King of the Hammers, and so involved even the Navy and Marine Corps lend a hand. It houses thousands of spectators, participants, racers, crew, and those there for the 10-day party. 

Image the sensory overload of an event like SEMA, but where vehicles are actually put to the test in the desert. It’s hard to take it all in, but luckily, you have ten days to do it. Hammertown features pit crew challenges, qualifying races, pre-runs, vendors, driver meet and greets, and various other events. Plus, there’s food throughout the town and music every night. 

Hammertown is like going to a car show and enjoying the cars in the parking lot; participants and their vehicles are just as fun to watch as the races. You need an off-road capable vehicle to see various sections of the racecourses, and KOH brings out the best and most interesting off-road rigs around. From jacked-up Mercedes to Econoline vans straight out of a 1980s summer camp and every genre of Jeep. 

The KOH community makes it a world-known event. With crazy rigs and dedicated enthusiasts partying for a week straight. The off-road community is a tight-knit group looking for fun with dirt-filled grins, hats made of beer cans, and bound fires that last all night. 

…KOH brings out the best and most interesting off-road rigs around…

The lakebed is in the center of Johnson Valley, which is known for having some of the most challenging terrain on the west coast, with large boulders, steep drop-offs, and narrow trail sections. King of the Hammer’s name comes from the notorious “hammer” trails. Many of the nearly 500 registered racers don’t make it back to the finish line. Johnson Valley trails have also claimed many lives over the years. It puts drivers and crew through various off-road racing disciplines from steep rocky mountains, rolling hills, open sections, and a large dry lake bed, with elevations ranging from 4,600 to 2,300 feet. Modern-day Ultra4 cars require indestructible components and produce over 900 horsepower.

The start/finish line is in Hammertown, allowing spectators to get up close to the action, starting with a closed-circuit style dirt course section. This section of track allows for door-to-door action in qualifying and a unique start/finish to off-road racing.

Across the Means Dry Lakebed, is the high-speed section with divots, obstacles, and hard-to-see terrain. Far from a smooth lakebed like Bonneville, this terrain requires faith in your equipment and nerves of steel to keep full throttle. 

After the Dry Lakebed, the land immediately transitions into technical rock trails with boulders of sizes ranging from a few feet tall to those bigger than the vehicles themselves. Racers go from triple-digit speeds immediately into narrow paths up mountain terrain. From loose sand into jagged rocks, these areas require patience, tough tires, and an impenetrable undercarriage. Don’t be surprised to see multiple rollovers throughout the event. 

What started as a single-day race in the Southern California desert in 2007 has grown to a 10-day event in 2022 with multiple classes, including Trophy Truck, UTVs, and Ultra4 cars. They compete on different days leading up to the Race of Kings’ main event.

This year’s Hammer’s week featured four primary races. First, the Toyo Tires Desert Challenge, a classic style lapped desert race. Second, is the Can-Am UTV Hammer Championship, where UTVs race the same course as the big 4400 cars. Third, is the 4-Wheel Parts Every Man Challenge, which features four separate classes 4600 – Stock, 4500 – Modified Class, 4800 – Legends class, and the EV Class. For the 2022 event, every class was packed with competitors, all attempting to tame the racecourse and bring home the coveted King of the Hammers trophy.

…What started as a single-day race in the Southern California desert in 2007 has grown to a 10-day event in 2022 with multiple classes…

The Desert Challenge featured two days of non-stop action, with the limited class racing on day one. Chase Warren in his Class 10 car held off Mitch Guthire Jr. in his Polaris RZR Pro R for the win. Brady Wisdom took the third spot on the podium in his Class 10 car. Day two featured the Unlimited Race with the Trophy Trucks (T1), and the 6100 trucks (T2) laid down the power in the desert. Qualifying for this race featured a prologue included in the overall time to determine a winner. Last year’s winner Bryce Menzies, one of the favorites to win, had drivetrain troubles that pulled him out of the race after one lap. Kyle Jergensen held off the charge from Luke McMillin, who had a throttle cable issue that cost him precious minutes and left him in third place behind Christopher Polvoorde.

 With the desert racing out of the way, it was time to go to the rocks. First up was the UTVs maneuvering through the rocks, flying through the desert, and running door-to-door on obstacles. Kyle Chaney held off Hunter Miller for the win, and Paul Wolff battled his way through for a third-place finish.

One of the most fantastic races to watch is the Every Man Challenge, where you can race everything from a vintage 4400 car to a stock Suzuki Samurai taking on the course. This years’ race had an extra level of excitement as the Ford Performance team was on hand with new Bronco race vehicles. They swept the stock 4600 class with Vaughn Gittin Jr., Brad Lovell, and Bailey Cole, finishing 1-2-3 for Ford.

Dan Fresh was your overall winner and 4800 Legends class winner with a speedy time beating Toby Stacy by over 30 minutes, with Chayse Caprara taking the third spot just minutes behind Stacy. In the Modified 4500 Class, John Mathews held off a strong charge from Joe Gatlin to win, with Kenneth Goodall earning the third podium spot.

Only one race was left to crown the 2022 King, The Race of Kings. With over 100 entrants this year, the field was stacked with plenty of cars and drivers gunning for the top spot. However, the race came down to two guys, three-time king Jason Scherer and longtime competitor and top challenger Raul Gomez. These two battled all day with Jason out front most of the day before a costly flop had him winching early on the third lap.

With Gomez out to a solid lead, a high-center had him winching while Scherer could make up time. Another late-game flat tire made it impossible to catch up to Gomez, who earned first win in Johnson Valley and the first solo competitor to take the title. Finishing in the third spot was Josh Blyler, who battled his way through the field after qualifying 20th for an impressive finish.

 The King has been crowned for this year, and that means guys like Scherer, Levi Shirley, Erick Miller, Shannon Campbell will be looking to take back the crown next year as the target is now squarely on Gomez’s back.

The Basics 

• King of Hammers began as a private event, created by rock-crawler champion Dave Cole and desert racer Jeff Knoll. 

• King of Hammers is typically held on the first week of February. While technically the King of Hammers race is a one-day race, there’s a week of events leading up to that final day. 

• King of the Hammers is held on the Means Dry Lakebed, as a part of the Johnson Valley OHV. California has state-run areas known as OHV areas (Off-Highway Vehicles), where off-road vehicles can be used. 

• Johnson Valley is known as the Home of the Hammers, having several intense trails such as the Jackhammer and Sledgehammer trails. 

• The center of King of Hammers is Hammertown, where teams, sponsors, and participants turn the desert into a temporary city of racing. Admission includes access to Hammertown and gets fans close to the start/finish line.  

• Different areas of the racecourse are easily accessible with a stock off-road vehicle. 

• Past winners and those who participated in the first event are invited to return at every race thereafter.
  

  

  

  

  

  

  

  

  

  

  

  

A DeLorean Turbo Widebody for the Future

Not Another Back to the Future DeLorean

When fresh automotive news or SEMA builds debut there are many outlets jockeying for position and trying to leapfrog competitor’s publishing dates. But the planets can align when scheduling, connections and a unique angle all work together to capture a feature not seen elsewhere. This time around when the silver twin-turbo DeLorean debuted at SEMA and filled everyone’s feed, we kinda sat back and went: “yeah I know that car, the owner and it’s 15 minutes away,” with smugness. And with that we reached out to builder Tim Moceri of Salvage to Savage garage, who all of a sudden became internet famous in the first few days of November this year.

Tim is a friend for a number of years and we’ve actually collaborated on a build before. Tim crafted an incredible widebody Lexus project that was about to take the internet and SEMA by storm but a number of different factors meant it was mostly a learning experience. The DeLorean has been Tim’s time to flex. He had the hot Gen X platform, a real budget, and the right team at Salvage to Savage garage and well, Tim describes it as “redemption that has solidified future SEMA Shows” for him and we couldn’t hit the ‘LIKE’ button more on that statement.

SEMA 2021 might have been a different show thanks to our old buddy COVID but there was an “it car” from the show and that was this DeLorean. The silhouette of the DeLorean has been made iconic by Hollywood and desired by many 80s kids but if you have ever read a real review, it was hot garbage. An anemic motor, questionable build quality and an assembly line so far in trouble it needed JohnDeLorean to sell cocaine to support it, spelled disaster for the DeLorean… well until now.

If you are wondering about your level of color-blindness, yes the DeLorean is now gold. Wrapped in a sexy satin gold by Von Wraps of Boca Raton, FL, the new look was to set it apart from the SEMA splash. There is also a potential buyer that has an all gold fleet, so draw your own conclusions. 

Conceptualized by the Instagram legend known as The Kyza (Khyzyl Saleem), who put together renderings for this project and is himself stunned at the integrity of the actual build. “Everyone is freaking out how the entire build down to the headlights and taillights emulates Kyza’s drawing,” says Tim “We took what Kyza couldn’t cut and weld together and made it without compromise or changes. It wasn’t supposed to look like anything but the rendering we thought.”

The donor DeLorean DMC-12, was found painted in red and had been in a major accident, so there was no destruction of a perfect collectible car here (not that they sell for much anyway). The stainless steel shell was heavily modified with a widebody flare, which has a carbon fiber composite update in development. A number of bezels and panels along with front fascia were crafted in satin black to work with the SEMA Silver and now the Miami Gold.

The wheels have also made an impact for the build and came from new sponsor Sköl Wheels of California. The custom size and offset Sköl SK17 3-Piece Modular Series were finished in brushed satin face with a polished lip. The aggressive stance of the DeLorean is thanks to Air Lift suspension mated to KW Suspension Variant 3 coilovers made possible by the magic Moceri worked to mount them as there are no part numbers fitting a DMC-12.

Tim is a horsepower addict, this is a guy that built a quad turbo LS truck and for the DeLorean he went with good ol’ GM know-how, the 5.2L LS V8. Not just any LS but a built motor fitted with a pair of Garrett G-Series turbos (unfiltered of course) and modulated by TurboSmart HyperGate 45 wastegates. The plumbing is all TiTek titanium with Vibrant Performance hardware and mastercrafted by Tim to tuck up under the rear bumper in a unique blend of show and go. The whole engine package is orchestrated by a Haltech ECU to make it all play nice together. The twin turbo LS mill is fitted to a Porsche 996 6-speed transaxle to drive power to those fat rear tires.

After the triumphant return from SEMA, Tim didn’t sleep on his accomplishments but got to work with Salvage to Savage on the next steps. Tim is back at the workbench on perfecting the running and driving dynamics of the DeLorean and producing parts in carbon fiber because he says along with this potential buyer, there may be a market. “Thankfully, I have another DMC-12 at the shop if we have to start producing more of these.”

We couldn’t agree more Tim, if we had unlimited car money too we would hop on the list because as fans of all things 80s, there isn’t a better DeLorean tribute out there.

Top 10 Air-Cooled Porsches

From 356 to 993, These are the Cars that Built a Teutonic Legend

The air-cooled, horizontally-opposed engine design that Porsche used with great success over decades had humble beginnings as a four-cylinder development of the original Volkswagen powerplant, but grew to become one of the most iconic engines ever found in both sports cars for the street and pure race cars. Here are ten milestones that cover the 50-year history of Porsche air-cooled boxer street cars.  

1948 – Porsche 356

From the rubble of war-ravaged Europe, a small, lightweight, rear-engine sports car based on the basic powertrain design of the pre-war Volkswagen “People’s Car” was created, dubbed the 356. The flat-four engine grew in displacement (from 1.1 to 1.5 liters), valve count (the 4-valve Carrera became optional at the end of 1955) and horsepower (29kW/39HP initially, 118kW/160HP in the most highly developed version) over the 356’s 76,000+ unit,19 year production run.

1964 – Porsche 911

With the 356 still selling but at the end of its development potential, the automaker introduced a new design, retaining the rear-engine layout but adding an additional two cylinders, which bumped the displacement to 2 liters and power to 96kW/130 horsepower. You may not have heard of this obscure model, as production only continued through 1989, but it represented the cornerstone of Porsche’s business model, with a legacy that continues to this day.

1965 – Porsche 912

Concern over the increased cost of the new 911 model compared to the outgoing 356 led to the introduction of an ‘entry-level’ version of the platform powered by a holdover flat-four sourced from the latest versions of the 356. Lighter, less expensive at $4,700 list price, and offering 66kW/89HP, the 912 substantially outsold the 911 at first, but by 1969 production facility realignment and stricter looming emissions requirements in the critical US market led to the decision to end 912 production in favor of the 911 and 914. In 1976, the 912 name was revived for an “E” model to replace the 914 as the bottom step of Porsche’s three-rung performance ladder until a proper successor came on-line. Just shy of 2,100 total 912E models were manufactured during that single model year, and were only sold in the US market. 

1969 – Porsche 914

Born out of a contractual obligation to provide developmental support for Volkswagen and the need to phase out the 912 in favor of a new model, the 914 was originally conceived as being sold as a VW when powered by a flat-four and a Porsche with 6-cylinder power. Concern about the US market and potential brand confusion led to Porsche marketing both models, bringing the long-standing ‘gentlemen’s agreement’ between the two companies to a sour conclusion. The car itself was a success, outselling the 911 and pioneering a rear-mid-engine powertrain layout that placed the engine ahead of the rear axle instead of behind it as it had been in the 356, 911, and 912. Though more than 118,000 were sold worldwide during the eight year production run, a bare 3,300 914/6 models would be produced. Largely overshadowed today by the runaway success of the many 911 models that appeared subsequently, the 914 was in many ways the blueprint for the modern Boxster/Cayman platform. 

1973 – Porsche 911 Carrera RS

The Rennsport (‘racing sport’) version of the classic 911 is widely considered to be one of the most desirable models from a collector’s standpoint, thanks to their improved performance and relatively low production numbers. Porsche, looking for a competitive edge in racing organizations that demanded a minimum number of cars be built and sold to the general public, created the RS as a ‘homologation special’ with a bigger and more powerful 2.7 liter six delivering 154kW/207HP. Other changes from the standard production model were an upgraded suspension, wider rear wheels and tires, more capable brakes, and aero mods that included the now-iconic “duckbill” rear decklid spoiler. In addition to these features of the “Touring”-spec RS, buyers could also tick the Sport Lightweight box on their order form which substituted thinner body panels and glass, saving an additional 220 or so pounds over the already-light 2,400 pound curb weight of the RS Touring.

1974 – Porsche 930

Though officially referred to as the 930 in the US, this variation was universally known worldwide as simply the “911 Turbo”. Introduced with a 3.0 liter engine rated at 190kW/260HP, the 930 had grown by 10 percent in displacement and another 40 horsepower by 1978; while 300 ponies doesn’t sound like much by modern sports car standards (or even compared to some crossovers), in a lightweight chassis with extreme rear weight bias and legendary turbo lag, it was more than a handful to drive. Even comically-wide rear fender flares to cover enormous rear tires and a giant whale tail spoiler could only partially correct the car’s off-throttle understeer/snap oversteer handling characteristics, and perhaps no vehicle in history other than the Beechcraft Bonanza has actively tried to kill as many doctors, investment bankers, and trust fund kids as the original 911 Turbo. Nevertheless, it remains an object of pharmaceutical-grade desire for anyone who was aware of cars in that era.

…perhaps no vehicle in history other than the Beechcraft Bonanza has actively tried to kill as many doctors, investment bankers, and trust fund kids as the original 911 Turbo…

The 930 had a hiatus in the US market due to emissions issues from 1981 until it was reintroduced for 1986, and by then the car was long in the tooth in terms of engineering, but it was still hugely profitable for the company. Porsche squeezed every bit of sweet, sweet juice out of the Turbo nonetheless, introducing the ‘slant nose’ version towards the end of production in 1989.

1989 – Porsche 964

Marketed as the “Carrera 2” and “Carrera 4”, the internally-designated 964 platform carried over just 15% of its design from the ‘classic’ 911, and was the first version to offer all-wheel-drive; as a matter of fact, the original 1989 model was only available in Carrera 4 configuration with the Carrera 2 coming on-line a year later. Power came from an equally new 3.6 liter air-cooled flat six designated the M64 rated at 184kW/247HP, and the suspension design made the radical shift from torsion bars to coil springs, with the ubiquitous MacPherson strut configuration up front and an independent semi-trailing arm rear. Coupe, Targa, and Cabriolet body styles were offered, and power steering and ABS were introduced as standard features. Buyer demand in the US led to an RS America version for 1993 and 1994, based off of the Carrera 2, featuring a whale tail spoiler, de-contented interior, and lower 2,954 pound curb weight, among other changes. Overall, the naturally-aspirated 964 spanned just half a decade of production but racked up 63,762 cars built among all the configurations.

1990 – Porsche 964 Turbo

With the introduction of the new chassis and naturally aspirated motor but a successor to the previous Turbo’s powerplant still under development, the 930’s engine was used as a stopgap. Changes increased rated power to 235kW/376HP but blunted a bit of the turbo lag, which along with the revised chassis and suspension made the car much easier to drive at the limit than the previous Turbo, but still not particularly forgiving of large changes in throttle position mid-apex. 1992 saw the debut of the Turbo S, which had the same peak power but detail revisions to the tune, a lightweight interior similar to the RS America, a manual steering rack, and lowered suspension. Only 86 were produced, making for one of the rarest road-going 911 models ever offered. By 1993, a new boosted M64 was finally available for the Turbo 3.6 model with 265kW/355HP on tap, but the 964 was nearing the end of its abbreviated lifespan and only one model year and less than 1,500 total cars were produced to that spec. 

1994 – Porsche 993

For the 1995 model year, Porsche once again mutated the 911 DNA to produce another generation with minimal (claimed less than 20%) carryover from the 964. Major frame and suspension design changes improved handling and further tamed the inherent snap-oversteer characteristics common to rear engine designs, and once again both 2 and 4 driven wheel models were offered. While the M64 engine design was carried over, this generation gained a sixth gear in the manual transmission and a bump to 200kW/268HP at introduction. Coupe and Cabriolet body designs were manufactured, along with a complex “greenhouse” roof marketed as a Targa but with a power-retractable glass panel in place of the previous removable section. Production ended in 1998 thanks to the air-cooled design no longer being able to reasonably meet emissions and noise standards, but not without one final model to properly put a coda on the end of the air-cooled 911 symphony…

1995 – Porsche 993 Turbo

Everything came together in the last air-cooled Turbo 911, with a 3.6 liter twin-turbo M64 cranking out 300kW/402HP, the first all-wheel-drive layout for a 911 Turbo, wider rear bodywork, and of course a whale tail spoiler. All the nasty surprises of the original 930 had been eliminated, creating a car that was more forgiving when pushed, not a carnival ride in bad weather, and shockingly quick under all circumstances. The ante was upped in 1997 with the Turbo S’ uprated engine delivering 424 horsepower, and another homologation special, the GT2, was produced and sold in small numbers, making it highly sought-after by collectors. All things considered, the 993 Turbo was a fitting conclusion to the first part of Porsche’s 911 evolution. 

L’Automobile Storms Miami Beach With Concepts, Customs, and Supercars

Second Annual Event Showcases World Class Cars

When you think of Miami, visions of the unhinged 80s immersed in a tropical lifestyle with a dose of narcotics come into focus. However, Miami is now recognized as an international hub of fashion, culture, and art renowned the world over for producing leading-edge designers. The car in Miami is more of a statement than basic transportation and even six-figure supercars are heavily customized and modified to make an impact in South Beach, Brickell and emerging hot spots like Wynwood and the Design District. With this fashion, art and culture movement producing a show like l’Automobile would certainly succeed, transcending car enthusiasts to cater to the design inherent in cars and the talent designers who visualize and craft them as well.

L’Automobile (French for ‘The Automobile’) is in its second year and being a new show, at a fresh venue with an innovative approach, gained momentum as car design aficionados caught on. The founder, Elo is no rookie in the high end, design and custom car scene. That’s right, the founder goes by only one name and comes by it honestly coming from the fashion world in the UK and Europe and setting up shop in Miami to establish a high dose of sophisticated car culture in one of America’s leading arts locales.

The 2021 show forged ahead through the pandemic with strong attendance for international cars and infamous car personalities such as:

• Fabio Lamborghini: The nephew of the famous Ferrucio Lamborhini, Fabio trained in engineering and worked at divisions of the fabled automaker until 2007. He was also active in contributing to the Ferruccio Lamborghini Museum in Sant’Agostino, Italy, which these days is more of a special guest at auto events around the world.
• Maurizio Corbi: Active designer from Italian coachbuilder Pininfarina and responsible for the Ferrari legends, the F355, the 550 Maranello and yes even the exclusive 349 unit F50 flat-12 supercar from the 1990s. 
• Malcolm Bricklin: Most famous for the mid-1970s composite panel V8 supercar bearing his name the Bricklin SV-1. Bricklin is an auto exec that has had many successes over the years and remained a force in the automotive business into his 80s.

Beyond the star power invited to the event, the Miami VIP car elite showed up en masse with millions of dollars in supercars, hypercars and classics sitting out in the parking lot forming a show itself. Dozens of Ferraris, Lamborghinis and McLarens graced the lot with the odd Koenigsegg and Pagani to make a statement. But inside the show the collection got even more eclectic, exotic and rare being hand picked by Elo himself.

Likely the most expensive vehicle at the show was the Red Bull HONDA-powered F1 car to promote F1 Miami. The show also included a high value of the late model supercars, as well as an array of customs and prototypes, which are truly priceless. We’ve seen the outrageous coachwork on the Lamborghini Espada rat rod built by Danton Arts Customs of France but in reality, the impact never fades on us. The Espada again graced another Miami show but it was it’s neighbor the Salvage to Savage DeLorean twin turbo widebody that shocked the crowds. This show was the first appearance of the 2021 SEMA hit show car, that easily made the largest impression on attendees at the Vegas show.

Built just north in Boca Raton, FL, the widebody DeLorean is literally a concept from famous 3D designer, The Kyza (Khyzyl Saleem) meticulously crafted into metal and composites. This is a true fantasy-concept sitting at the l’Automobile show but far from a rolling clay shell, this retro supercar makes real jam. Under the bonnet is Garrett twin turbo-powered 5.2L LS V8 channeled through a 6-speed Porsche 996 transaxle to the rear wheels. Not only was the first time anyone has seen the car wrapped in this rich gold hue, there is more to the build we are featuring soon.

A pair of retro highlights captured audience attention, the first was the Maggiore Project M. The limited to 40 units Project M, is based on the venerable Ferrari 308 with a fresh take on wider bodywork, composites and modern technology to make an all new approach to the Magnum-mobile. Another fan favorite was the Miami-themed Land Rover restomod. A nut and bolt restoration of this offroad legend, has been reborn with everything replaced or renewed and in a high-impact color-scheme that got a rumored $250,000 offer to buy the truck after the show.

With all of the gasoline-powered legends new and old, it was in fact a pair of EV concepts that caused a frenzy of activity. While gear heads play out the final decades of the internal combustion era, next-level projects like the EV-powered Shelby Daytona Coupe really commanded attention. This sleek silver car by Superformance was clearly missing trademark design cues like the massive side-pipes and gated manual. Although we did still spot a fuel pump switch, oil and water temp gauges, this work-in-progress has a dual EV motor set up capable of over 1000lb-ft of torque with a sub 3-second 0-60mph claim.

Beyond the Daytona Coupe EV was what appeared to be a Porsche 911 930 that curiously was missing the exhaust pipes out the rear fascia. The car called the Electric GT certainly looked like a gas car, yet had a pair of massive electric motors mounted to the rear axles resulting in one fast, yet silent assassin on the track.

Once again l’Automobile asserted itself as not a traditional Miami car show. Dozens of high-end and rare supercars from Bugatti, Koenigsegg and Pagani are seen regularly at many shows in South Florida but still the unique content at this oceanfront show setting sets itself apart. 

Exotics on Las Olas Takeover of Florida With Supercars Galore

Fourth Annual Show brings Exotics and Race Cars to Fort Lauderdale Streets

South Florida has money. Stupid kinda money where you regularly see yachts cruise by that are more than a lifetime net worth… multiplied by 100 lifetimes. For the supercar, hypercar and racecar scene, South Florida is a flurry of activity. There are collections here that will never see the light of day and having experienced a few in person, I can only verbally describe them as breathtaking because for security reasons, there won’t be any pics shared. However, Exotics on Las Olas is a show that has the owners of dozens of these rare exotics shined up and brought out to takeover the streets of Fort Lauderdale in a premium car show that realistically is a once in a lifetime opportunity. 

Show organizer Floyd Rag is not only a former NFL’er and celebrity-connected player but he is a huge car enthusiast who created and produces a number of popular car shows in South Florida. Floyd built up a hugely popular event called Supercar Saturdays for local dealer networks:Lamborghini Broward, Bugatti Broward and Koenigsegg Florida. With that show firmly established, he wanted to reach beyond the confines of a dealership or mall as a venue and takeover downtown Lauderdale to bring the magic to a wider audience. And now, for the fourth year in a row, the show plowed through the Pandemic to impress crowds with millions of dollars in supercars tough to find all in one place and certainly not in most states.

Past Exotics on Las Olas shows have showcased rare cars like Bugatti Divo, Pagani Huayra Roadster and even rare birds like the Maserati MC-12 Corsa, of which there are only 12. In 2021, it was more late model madness of pricey supercars, hypercars and tuned exotics that were one-offs of only a handful made. Probably the most impact at the show was garnered by the Apollo Intenza Emotizione from Ikonik Motors of Miami. Owner Barry Skolnick is a mega-millionaire that has stormed the Florida scene with his growing collection of exotics but has parlayed his passion into a retail business being the first customer to secure a V12 Apollo hypercar here in the US.

While many late model supercars graced the show, we took notice of not one but three Lamborghini Huracan STO examples in attendance. The STO is basically a street-legal race car, which in many ways is the peak of the Huracan platform as it enters its eighth model year. It seems like only yesterday the 610-4 trim came out but now there are so many variants, many of which were at the show including three Super Trofeo race versions.

While Italian supercars dominated Exotics on Las Olas, we have to tip our hat to cross-channel rival McLaren as there were many stunning examples on parade. A number of McLaren 765LT and 765LT Spiders baked in the Florida sun along with a handful of unique MSO examples on display with roof scoops and all. While the McLaren factory efforts amounted to loads of eye candy, we couldn’t believe the offering from German tuning house Novitec. The wider, faster and generally more outrageously styled Novitec 720S N-Largo was parked on Las Olas and we’re not sure just how rare people realized it actually is… there are only 14 beyond the one we were looking at!

The Novitec 720S N-Largo delivers on the performance and aero expected of the southern German tuner with a hint of Senna styling. The limited McLaren boasts 806hp and takes the already fast 720 platform to 60mph in only 2.7-seconds on the way to a top speed of 217mph. The wider wheel and tire upgrades increase the track by 2.3-inches up front and over 5-inches in the rear making the stance difference nothing less than intense.

For the 4th straight year, Exotics on Las Olas has weathered the storm and beat attendance numbers year-over-year. We ran into a few automotive media colleagues who traveled quite a distance to cover the show. Seems our little supercar show in the quaint streets of old Fort Lauderdale on palm-lined Las Olas Avenue has made the cut and gone prime-time around the world.

Suspension Tech: Shock Reservoirs and Bypass Valves

Performance hydraulic shocks are both simple, and complicated at the same time. Both their function, and the parts they use are relatively simple, but it’s how they are configured that makes such a huge difference. First let’s look at what shocks do. The weight of the vehicle is held up by some type of spring (air, leaf, coil, or torsion bar). The shocks control the motion of the suspension. They do this by friction which causes heat. In essence, they do the same thing that your brakes do, but differently.

Hydraulic shocks are filled with special fluid that comes in different viscosities. Viscosity is a technical term for how thick, or thin the fluid is. The shock has a body, a shaft, and a piston. The piston is mounted to the end of the shaft which slides inside the bore of the shock body. As the shock is extended or collapsed, the shock fluid inside the body of the shock is forced through openings (ports) in the piston. These openings are covered by flat springs or shims that flex to either open or close the ports. As the fluid flows through the ports, it creates friction, and therefore heat, so it dissipates energy. This is commonly referred to as damping. The heat is then transferred to the air outside the shock. Shocks use thermodynamics, and fluid dynamics to control the movements of your suspension. Like I said, they are both simple, and complicated at the same time. 

Most factory supplied shocks, and inexpensive aftermarket shocks, have no external features. The common name for these shocks are smooth bodies, and it’s one reason why they are inexpensive. They still work the same way as the expensive shocks do, by forcing fluid through the ports in the piston. As the shaft moves in and out of the shock body, the piston moves through the fluid, and the shaft displaces the fluid. There needs to be room in the shock body for that shock fluid to go. On some shocks, they just leave enough air space for the fluid to move. If you are in rough terrain, and the shaft is moving in, and out quickly, the air in the shock body can mix with the fluid reducing the viscosity; creating emulsification. This causes the shock to fade. It can no longer provide the same damping. Your shocks will not be as effective until they cool down, and the air and fluid separate again. To prevent this, some shocks have a floating piston that separates the fluid, and the air. This prevents the fluid from foaming, but it takes up room in the shock. If you are using the factory supplied shock mounting locations, this will limit the amount of travel available for the shock to cycle.       

Most factory supplied shocks, and inexpensive aftermarket shocks, have no external features…

Once you start moving up in price levels, you will see external features like remote reservoirs, and bypass tubes. Both of these features are used to allow additional flow of the fluid inside the shock. Remote reservoirs can be attached to the shock body, or be mounted remotely by using a hose between the shock body, and the reservoir. For added strength, shock manufacturers will increase the diameter of the shock shaft. This then displaces even more fluid. With a remote reservoir, you have the necessary space to allow the additional fluid to be displaced, and you can add additional features that are not typically found on smooth body shocks. Most remote reservoirs have a floating piston, and a valve that allows you to charge the reservoir with compressed nitrogen. Nitrogen is used because it is more stable than oxygen; it expands less when it gets hot. This nitrogen pressure forces the floating piston against the shock fluid so no air bubbles form in the shock fluid. Increasing the nitrogen pressure can also be used as a minute tuning adjustment, but that’s a whole other article. Since fluid is moving from the shock body to the reservoir, some shocks will have an adjuster that controls that flow of fluid. It is one more opportunity to create adjustment to the shock. It allows you to change the damping of the shock by simply turning a knob. You can stiffen them up to control sway on the street, and then back them off so your suspension will travel freely when in the dirt.

When it comes to the ultimate in adjustability, you now have the bypass shock. There are internal, and external bypass shocks. Fluid bypass works on both the compression stroke (the shaft pushing into the shock body) and the rebound cycle (the shaft pulling out). First we will talk about a single, external bypass tube used in compression, and what it does. The bypass tube will be welded to the outside of the shock body. It has an intake port that allows fluid in, and an adjustable, one way valve on the opposite end of the tube that regulates fluid flow back into the shock body. As the piston moves during compression, it pushes fluid into the bypass tube. Depending on the way the valve is adjusted, it could be a lot of fluid, or very little. The more fluid through, the softer it will be, and vice versa. 

Now we can discuss what it means to be position sensitive. Let’s say you have 3 bypass tubes that work during the compression cycle, and the shock is completely extended. As the piston moves into the shock body it is pushing fluid into all three bypass port openings. The openings are strategically placed on the shock so each opening creates a zone. As the piston moves past an opening, no more fluid is moving through that tube. Depending on where the ports are located in the stroke, you can adjust the fluid flow according to the position of the piston. That makes the bypass ports position sensitive. You can make the shock progressively stiffer as it compresses, or several other configurations according to bypass tube placement, and number. The same is possible for the rebound cycle. 

When it comes to the ultimate in adjustability, you now have the bypass shock…

When it comes to bypass shocks, there is also an internal bypass configuration that uses port openings that are not typically externally adjustable. The internal bypass design has a sleeve inside the body where the piston rides. The sleeve has ports in it to allow fluid to flow through to the space between the sleeve, and the larger diameter of the actual shock body. 

We have only covered the basics of bypass, and external reservoirs. There are many different variations and unique applications to these basic concepts. When it comes to shock design, the best and the brightest have been experimenting for over a century. When it comes time to upgrade your shocks, be sure to talk to the experts at the shock companies as technology, and designs continue to advance. Both Fox, and Bilstein are making electronically controlled shocks that are even more intricate, and capable of fine adjustments.     

Online Car Buying – The Next Big Thing?

Your Next New Car could be Made to Order and Delivered Straight to Your Door

Over the past twenty years, untold billions of items have been purchased over the internet, and nearly as many articles have been written about the effect of online retail on traditional brick and mortar businesses. Even before the handbrake got yanked on in-person retail due to Covid-19 concerns, it was already possible to buy anything from groceries from the local supermarket to electronic components of questionable quality direct from the manufacturer in China, delivered straight to your door or mailbox. 

With so much commerce going on via the web, there are still some things that aren’t so easy to buy with the click of the mouse, though – One of them is a new car or truck. The complications involve both the unique aspects of vehicle purchasing and some long-standing laws that were originally designed for consumer protection against manufacturer monopolies, but now mostly shield those who are heavily invested in traditional dealer networks from competition.

Today, we’re going to take a look at the current state of online car shopping, explore the reasons why the status quo exists, and make some predictions about what the future holds for those who’d like to be able to buy a new vehicle with the same convenience you’d expect when ordering Pad Thai because you just can’t bear the thought of cooking again tonight. 

Dont Four-Square Me, Bro…

As far back as the year 2000, almost half the people who responded to a J.D Powers and Associates survey said they would opt to buy cars directly from the manufacturer, even if it didn’t save them any money, and it’s unlikely that near-majority of customers would be less likely to do so today. Clearly, the traditional brick and mortar new car dealership system has a serious problem when so many people would prefer to avoid it entirely even if there was no cost advantage to doing so. 

Today, there are more resources available than ever for car shoppers to do their research, revealing invoice costs, rebate and financing offers, and even once-esoteric hidden seller profit sources like ‘dealer hold-back.’ Nevertheless, the average person may buy a handful of new cars over the course of their entire life, while the dealer literally sells them every single day. Even with better-educated customers closing the information gap, sellers still hold a huge advantage in experience, and the psychological manipulation that is often part of the game is well-documented. It should come as no surprise then that many would-be buyers would welcome the chance to spec out and price a new vehicle the same way you can order a new laptop, with zero interaction (or hard-sell pressure) from ‘helpful sales professionals.’

Manufacturer-Direct Pricing

Another 2001 study on the effect of auto buying referral services in California estimated that on average, those services saved consumers almost 2% compared to traditional sales channels, even though a middleman was still involved in the transaction. Direct sales from auto manufacturers offer even more potential savings, eliminating a lot of the financial ‘friction’ inherent in the current system that requires a huge infrastructure to store, merchandise, and eventually deliver new vehicles to their owners. 

So if nearly half of all potential customers would prefer to buy direct, and it would make new cars less expensive, why do dealerships still exist? There are several reasons, some good, and some bad. One primary obstacle is legislation that specifically prevents OEM sales to consumers outside of the dealer network – only a few states don’t either directly prohibit it or place extensive restrictions on the practice. This dates back more than a century when many of these laws were first enacted, ostensibly to prevent ‘vertical integration’ of the new vehicle market.

At the time, long-standing monopolies in many forms of business were being vigorously dismantled by ‘trust-busters’ in the name of consumer protection. Allowing car and truck manufacturers to completely control the market from raw materials to delivery was seen as unacceptable, and considering the limited range of choices available in the market and the low bargaining power of buyers, a network of dealers/middlemen was seen as the lesser of two evils. Today, there is a LOT of money tied up in the current system, from the real estate and buildings required for dealerships to the inventory they carry on their books and in their lots, so resistance to direct online sales is strong and well-funded. 

What is it Even Good For?

On the positive side for dealers, most new car buyers are going to insist on being able to test-drive vehicles prior to purchase, and the dealership sales model is well-suited to providing that opportunity. This is especially true when consumers aren’t set on the make and model of car that best fits their needs and want to cross-shop, but even the die-hard Corvette guy who knows exactly what he wants is going to make sure ‘his’ car drives properly before taking ownership.

This “showrooming” problem became apparent in the early days of online commerce, where consumers would go to big box retailers or specialty stores to hold something in their hands, then go and order it on the internet for a lower price. The physical store was stuck with all the costs of infrastructure and inventory, with no sales to show for it. 

One possible solution comes from what’s already been tried in countries without restrictions on direct manufacturer sales, where franchised dealers receive a commision for online sales in their exclusive territory as a way to cover the costs of maintaining a sales and service network and providing the “last mile” of vehicle preparation and delivery.

Speaking of service, warranty work, ongoing maintenance, and parts sales turn out to be a significant revenue source for new car dealers, one that even outweighs the profitability of car sales themselves. According to the National Automobile Dealers Association, over a ten-year period studied the average new-car dealership’s sales department varied between over $150k in profit and almost $50k in losses, while the service and parts department were continuous money-makers with net profits growing from $150k per location to over $300k. Much like the old business strategy of giving away razors to sell more blades, it seems that the most consistently profitable part of a new car dealer’s operations lie in taking care of vehicles rather than selling them. 

…it seems that the most consistently profitable part of a new car dealer’s operations lie in taking care of vehicles rather than selling them…

What About Tesla?

At this point, the only new vehicle manufacturer actively making direct-to-consumer sales is Tesla Motors, and in order to do so they’ve had to come up with convoluted custom legal work-arounds in almost every jurisdiction. In some places, Tesla showrooms can offer test drives and answer questions, but any talk of pricing or ordering is as taboo as saying “bomb” in the airport. In others, the number of Tesla sales locations is limited to a handful per state, or the semantic distinction of not having any ‘franchised dealers’ allows the company to simply ignore laws originally written to protect traditional sales outlets.

Regardless of how Tesla has managed to make direct sales work, any traditional manufacturer with an established dealer network is going to have to fight with their existing franchise owners to allow consumers to skip the usual baffling ordeal that is the new car purchasing experience. It seems inevitable, though, given consumers’ strong preference for online buying and the significant savings possible. Traditional dealers will be faced with choosing to hang on to an expensive business model their customers hate that has been made obsolete by technology, or pivoting to provide the profitable services that will still be necessary when large-scale direct sales become a reality.

Top 5 Overlanding Necessities

1. Water

Water is a no-brainer because you cannot live without it. It is the most basic necessity regardless of where you are. It is used for drinking, washing, cooling your engine, and preparing food. Early transportation routes were laid out according to where clean water could be found. They were routed from one watering hole to the next. Those who like to go overlanding where water is abundant still need a way to filter it before drinking. There are all types of filtering devices from hand held straws, to elaborate reverse osmosis, or ultraviolet light emitting systems that can be mounted to your vehicle. Boiling the water is also an option, but that requires time, and fuel. If you are harvesting water along the way, you will need containers to capture, and store it. You don’t want to put filtered water back into a container that had untreated water in it, so you need more than one.

Those who are in dry locations will have to haul their water in. Any long term trips off the grid will be limited by the amount of water you use, or don’t use. There are many tricks to conserving water. One is to scrub pots and pans with sand or dirt instead of water. Just be sure to get it all off before your next meal. A gallon of water weighs 8.34 pounds. Gasoline only weighs 6.1 pounds per gallon. Think of how sturdy gas tanks are built. Your water tanks need to be just as robust, and be mounted low on the vehicle, like fuel tanks, in order to keep your vehicle stable. If you are going to be overlanding, you need a reliable system in place.  

2. Tires

You need good tires when you head off road. They are the only thing between you, and the ground. Not only do your tires need to provide traction for forward progress, but they also give you control when stopping, and steering. In many types of terrain, you won’t get 5 feet without off-road tires. Street tires will get packed with mud or just spin in the sand without getting traction. Tires also need to be durable enough to resist getting punctures, or having the tread sliced to bits on the rocks. No matter how good your tires are, eventually you may still get a flat so make sure you have a good spare, and repair tools for fixing punctures. Getting double flats is not uncommon as you can hit the same impediment with more than one tire. Having a single spare tire won’t always solve your problem. There is a good reason why off road tires are almost always the first modification done. Good tires will make a huge difference in your ability to have fun in the dirt. 

In  many types of terrain, you wont get 5 feet without off-road tires…

3. First Aid Kit

When you think of first aid, many think bandages, and tape, but you also need to consider your vehicle’s requirements. You should have spare parts on board to fix common issues that regularly arise. Typical parts to carry are belts, hoses, fluids, fuses, and the tools needed to make repairs. Do some research on your vehicle to find out what fails over time, and what the repair job requires. I had a custom suspension on my prerunner that took some special bolts. I put together my own kit that had a new replacement bolt for every one used on my suspension. Over time your kit will grow to include all types of spares as you learn from experience. 

Once your vehicle has everything it needs to stay healthy, you can focus on passengers. There is a big difference between a simple first aid kit, and one that is capable of handling severe trauma. If a medical emergency takes place, chances are everyone will be stressed. Having a serious medical kit will not only be a huge benefit in treating the patient, but it will also give you solutions that will keep everyone calm. Number one is having enough materials to stop bleeding as it is an immediate problem. You will also need pain medications like aspirin or ibuprofen. Some antihistamine is crucial for swelling or bug bites, and disinfectant or antibacterial ointment is always good to have. If you are on medication, make sure you have more than what you need for your trip in case you get delayed. A good thing to do is consult your doctor. They will know what types of medications, and implements are best to have on hand. 

4. Navigation

We all go overlanding in the first place to get away from everything, but it’s also important to get back again; you need to learn how to navigate. Too many people simply rely on electronic devices for navigation. They are nice, and give us tons of useful tools when they work. When they don’t, you can get in a lot of trouble. It’s so easy to throw a map in your truck of the places you’re going to visit. That way if your electronic device fails for any reason, you will be able to figure out where to go. One of the handiest maps to bring is a topographic, or topo map as many call it. The topo map shows the contour of the terrain. It has lines that are based on elevation. Lines close together mean the terrain is steep. Open areas with few lines are mostly flat. The topo map is also great for locating landmarks. If you see a high elevation, or big depression, you will be able to verify your position according to what you see. It’s also good to know what direction you are heading. This can be easy in wide open spaces by watching the sun. In dense forests or canyons it can be nearly impossible. Don’t trust the old saying that moss only gathers on north facing surfaces; nature is not absolute. Most people just use a compass. Get one, and learn how to use it. 

5. Recovery Gear

Certain things are a given when going off road; like getting stuck. You should always have a few items needed to get un-stuck. First is a shovel. I once slide into a snowbank and had to dig myself out with my license plate. Now I always have a shovel. You will also need a good tow strap, and strong recovery points on your vehicle. With today’s plastic clad vehicles, it can be a challenge to find someplace to attach a rope. Make sure you have something on the front, and rear. If you travel alone, you probably need a winch, and all the paraphernalia that goes along with one. The traction boards that are everywhere are also very handy for self-extraction. High lift jacks are very popular, but I wonder if they ever get used on some rigs because you need strong lifting points with plenty of clearance. If you don’t have beefy bumpers or sliders, they are almost useless. 

Certain things are a given when going off road; like getting stuck…

This list just covers the basics, and admittedly many may have different needs, and desires. The bottom line is to be able to get where you’re going, and back, while keeping everyone healthy, and happy along the way.   

Canyon Carving on a Budget

Top Tips for Making the Most Out of Your Sunday Drive

Let’s get this out of the way right from the beginning: We do not condone operation of a motor vehicle on public roads in an unsafe manner, or the violation of traffic laws. Streets are not a racetrack or dragstrip, and bad things can and do happen with greater frequency and more severe negative outcomes as the result of that kind of behavior.

With that said, however, we understand that one of the major joys of having a car that’s fun to drive is driving it in fun ways, and a relaxing, yet spirited romp down a challenging road is a fine way to spend a Sunday morning. A car that doesn’t get driven is like a stuffed lion in the natural history museum instead of running free in its natural habitat. 

Keeping all that in mind, we’ve come up with a short list of ways to get the most out of your safe, socially-responsible leisure time behind the wheel at minimum cost. It’s not comprehensive, but it is all born from experience, and sometimes painfully and expensively learned experience at that. 

A car that doesn’t get driven is like a stuffed lion in the natural history museum instead of running free in its natural habitat…

Mechanical Mods

Tires

We’ve said this before, and we’ll say it again – nothing affects your car’s performance (acceleration, braking, and cornering) more than the four small places where tread meets asphalt. Even stock wheels can benefit from upgraded tires biased toward performance, and the key thing to look for here isn’t necessarily what DOT-approved rubber is the latest and greatest in terms of maximum grip. Instead, you want a tire with approachable limits and forgiving characteristics that provide feedback with plenty of traction left in reserve before breaking free. On a racetrack, another 0.1g might be worth dealing with razor-edged traction, but out in the world, there aren’t many safe runoff areas or gravel traps to let you find out where the limit is without having a really bad day. When choosing tires, the manufacturers’ marketing materials may help a little bit, but the best bet is to look to owners’ groups for your make and model so that you can leverage the experience of others.

Brake Pads

When people discuss brake mods, the talk almost always is about big, slotted rotors and six-piston calipers peeking out of large-diameter aftermarket wheels. But like tires, brake pads are another routine consumable that you will have to replace on a regular basis anyway, and spending a little bit of extra money and a few minutes researching your options will pay huge dividends. Even stock calipers and rotors can be inexpensively upgraded with a change to a performance pad compound, and there are multiple companies making drop-in replacements for pretty much every interesting car built in the last 30 years. Characteristics like cold coefficient of friction, initial “bite,” and resistance to fade are all customizable with off-the-shelf pads using different friction material. For optimum results, new stock or stock-replacement rotors properly bedded in using the pad manufacturer’s instructions are the way to go. But even if you forego replacing rotors and just clean and scuff the still-serviceable discs you have now, it will make a world of difference in brake performance.

An honorable mention here goes to flushing the brake system with new fluid, a proper bleed job, and even an upgrade to inexpensive but still DOT-approved braided stainless brake lines that won’t balloon under pressure to replace the worn out factory rubber ones.

Seat Belts

Here’s another mod that’s relatively inexpensive but pays big. Proper restraints, fastened and adjusted correctly, eliminate the steering wheel isometrics and knee-wedging that we end up doing unconsciously to remain in position during cornering and braking. Factory seatbelts are designed for comfort (mostly to increase usage) and to work as part of the supplemental restraint system in a crash, with belt pre-tensioners, precise attachment point geometry, and even sections of belt designed to stretch or extend via sacrificial stitching. None of this actually helps you prior to the rapid unplanned deceleration, however. Options here include SFI-style racing harnesses in 4 or 5 point configurations, and aftermarket belts designed specifically for the street, some of which even have DOT approval. Keep in mind, however, that just like removing and replacing a factory airbag-equipped steering wheel, you are defeating a safety device and the potential consequences are on you and you alone.

Here’s a completely free “mod” for cars with seatbelts that have a solid connection at the base of the B-pillar and a belt that passes through a slotted buckle before continuing to a retractor at the shoulder: Push yourself firmly back into the seat in the position you want to be in, run the waist part of the belt across your body while taking out any slack, and put a twist in the belt before clicking the buckle into place. It may take a few tries to get it the way you want it, but ‘free’ is the best price of all, and a snug fit across the waist will get you some of the advantages of costly race harnesses in terms of resisting side g loads with no real downside in safety. 

Sway Bars and Bushings

Sure, you might have a full set of double-adjustable coilovers on your wish list, but in terms of making a difference you can really feel, replacing the worn-out bushings in your factory anti-roll bar mounts and end links is incredibly cheap and rewarding. If you can stretch your budget just a little bit, stiffer bars (or even adding a rear bar to a car not factory equipped with one) will also radically improve handling. The best part is that as long as you stick with polyurethane bushings and don’t make the mistake of running solid bearings and heim joints on the street, it’s another mod with no downside to your car’s practicality for daily driving. Just be aware that factory anti-roll bars are calibrated to provide understeer at the limit on purpose, and making wholesale changes with roll stiffness can do unpleasant things to even the tamest car’s cornering balance. Pay attention to what the bar manufacturer recommends to steer clear (pun intended) of this issue. 

Preparation Matters

The Driver Mod

What’s something that only costs a modest amount, never wears out, and will make any car you drive for the rest of your life quicker? The legendary “driver mod,” of course! While this is often talked about in the context of a weekend bombing around the track at a race driving school, it doesn’t have to be that complicated and expensive if you live within reasonable distance of a local autocross venue. The Sports Car Club of America (SCCA) is probably the best-known national group that organizes these parking lot events, but there are plenty of other opportunities as well, from big car shows to brand-specific clubs. For a few bucks, you’ll get to test yourself and your car in a controlled environment and learn where the limits are without worrying about exceeding them. Many events will even provide experienced drivers to coach first-timers from the passenger seat, and if you really want a humbling experience, switch places and let them show you just how much faster your car is with somebody behind the wheel who really knows what they are doing.

Preflight Check

Here’s another not-mod that you really shouldn’t skip, for obvious reasons. Before you head out to the twisties, take just a moment to make sure your fluid levels are ok, nothing’s coming out from where it shouldn’t be, tire pressures are correct, and all the random junk in your back seat is left at home just in case. Grab the top of each of your front tires (or as close to it as you can, for those with sick stance and zero fender gap) and give them a nice hard wiggle to check for wheel bearings ready to give out or slop in the steering rack. Yes, it sucks to have to cancel your weekend fun because there’s something that needs attention, but it sucks a lot less than dropping a ball joint mid-corner and having to pay for a tow from way out in the boonies. 

Pre-run It

Even if the road is one you’ve driven a thousand times before, and you know every apex and straight, conditions change. While it might not be very exciting, prerunning your route at a leisurely pace before returning along it at a more spirited clip will let you find things like oil, coolant, water, rock slides, and even the occasional car on its roof (obviously driven by somebody who hasn’t read this article) with plenty of room to avoid them. It goes without saying that this is also a good way to gauge the current law enforcement level of interest on that road as well. More importantly though, this will significantly reduce the chance that you’ll yeet yourself off a cliff and into the afterlife because you only discovered an obstacle or puddle of oil once you got up close and personal with it. 

It goes without saying that this is also a good way to gauge the current law enforcement level of interest on that road as well…

We’ll end with one last thought – keeping a low profile and being respectful of other road users is extremely important. Nobody likes having a car in a ditch in front of their house every weekend, and loud exhausts, screeching tires, and aggressive driving in normal traffic lead to increased traffic enforcement or even nastiness like rumble strips and speed bumps. Enjoy the drive, but don’t be the reason things get ruined for everyone else.

The Big Squeeze: High Compression vs. Low Compression

One of the defining characteristics of an engine is the compression ratio, which in simple terms is a comparison between how much volume there is inside the cylinder when the piston is at its highest and lowest points (don’t get me started on Wankel rotaries – they’re basically witchcraft). Compression ratio interacts with a lot of other factors to produce power, and can be changed to some extent by selecting different components for the same basic engine during the build. To add another plot twist, the mathematically-calculated static compression of a particular combination can differ significantly from the engine’s dynamic compression in operation, thanks to sophisticated intake and exhaust design, forced induction, or even EGR (exhaust gas recirculation). 

A Real World Application for High School Geometry

To start calculation compression ratio, you need to know an individual cylinder’s displacement. This is the area of the cylinder multiplied by the length of the crank stroke. But you’re not done yet, because you also have to know how much space there is in the cylinder head with the piston all the way up as well. The difference between the maximum volume with the piston at bottom dead center and the minimum volume at the top is the compression ratio. This is, of course, a huge over-simplification, but it will give you an idea of what a number like “9.5:1” means – there is 9.5 times more volume inside the cylinder at BDC than there is at TDC.

Designs with long crank strokes relative to their bore diameters tend to also have high compression ratios. Diesel engines, which rely on very high compression to ignite the fuel and air mixture, are a typical example. But there are other factors that have a major impact on compression ratio. The design of the cylinder head’s combustion chamber is a big player here, as the smaller volume it incorporates, the higher the CR will be. Another significant way to alter compression ratio is through piston design – a ‘dished’ piston will have lower compression than a flat one, all other things being equal, and a domed one will have higher compression. Even things like the thickness of the gasket between the head and the block and whether the valves are dished will affect compression ratio.

Though it’s possible to math most of this out with a little applied geometry (or plug the appropriate numbers into an online calculator like a lazy internet tech writer would), the volume numbers for the piston and the cylinder head have to be actually measured, if they’ve been altered in any way from how the manufacturer delivered them. A head that has been “decked” by having material removed from the surface that contacts the block will have a higher static compression than an unaltered head, and pistons can be milled to lower compression, either on purpose or as a side effect of cutting pockets for larger diameter valves. While measuring actual piston dish/dome volume is kind of a pain, doing the same for a combustion chamber is actually quite easy, only requiring a measuring device with accurate markings in cubic centimeters, a piece of clear plastic with a hole drilled in it, some tinted water, and a bit of grease to seal the valves and where the plastic covers the combustion chamber. 

Compression Consequences

Now that we’re solid on what static compression ratio is, let’s take a moment to discuss why it’s important. In general terms, high compression (which is a relative term itself) is desirable because it enables more power production. Each cylinder-full of air/fuel mixture will have more room to expand and do work, making the engine more efficient. As mentioned before, diesel engines take advantage of very high compression to operate very efficiently compared to gasoline engines. But the same thing that makes diesels work in the first place – compression ignition – is also a big limiting factor for how much compression ratio a gas-powered engine will safely tolerate. 

In general terms, high compression (which is a relative term itself) is desirable because it enables more power production. Each cylinder-full of air/fuel mixture will have more room to expand and do work, making the engine more efficient…

120 or so years ago at the dawn of the automobile, engines were typically very low-compression compared to modern designs. The Ford Model T had a 2.9 liter inline four cylinder engine that produced a whopping 20 horsepower with a compression ratio of just 3.98 to 1. While the power output wasn’t all that thrilling, the low compression was a necessity during that time period when fuel was of uncertain quality and highly variable octane rating (we’ll get to more on that in just a minute).

As oil companies began to create standards for pump gas, compression rose to take advantage of better fuel, and the Second World War really turned up the wick on engine design. Because of ‘high test’ fuel, naturally aspirated engines for trucks, tanks, and especially aircraft became lighter and more powerful, and turbo and supercharged engines were finally practical. Even so, after the war when the first small block Chevy V8 engines were introduced in 1955, they ran compression ratios as low as 8.2:1 for durability. 

No-Knock Entry

The limiting factor on how much compression an engine can run is the knock-resistance of the fuel, commonly referred to as the octane rating. It gets its name based on a comparison of how hard it is to ignite relative to pure octane, a specific hydrocarbon fuel – gasoline rated at 93 octane in a particular test is easier, while 100 is comparable and 110 is more difficult. You’ll sometimes hear people say that what happens inside a cylinder is an “explosion” but if that’s what is happening, something has gone terribly wrong. It’s actually a ‘deflagration’ – rapid, but controlled burning. When fuel is compressed too much, it will spontaneously ignite and lead to preignition, detonation, or simply knock. Whatever you call it, it has the potential to very quickly melt spark plug electrodes, burn holes in piston tops, break the ring lands off the sides of the piston, and push out head gaskets. None of these are desirable outcomes

The limiting factor on how much compression an engine can run is the knock-resistance of the fuel, commonly referred to as the octane rating…

It’s possible to compensate to a degree for lower-octane fuel by running less ignition timing, but that’s a compromise at best. Because it takes a non-zero amount of time for an engine to completely burn a cylinder of fuel, all but the lowest-RPM designs incorporate some amount of ignition advance, firing the spark plug before the piston reaches top dead center on the compression stroke. As the flame front moves away from the spark plug towards the edges of the combustion chamber, it compresses the remaining unburned fuel and air, and if it squeezes it too hard, it can spontaneously and nearly instantly ignite instead of a smooth burn. This is one example of the dynamic compression we mentioned earlier.

Every engine has an ignition timing “sweet spot” that produces the best power when it is fed fuel with sufficient knock resistance, but it can run successfully, though with lower performance, if the ignition timing is retarded to later in the compression stroke to keep peak pressure in the cylinder below the knock threshold. You’ll often see modern vehicles with manuals that advise “Premium fuel preferred – 87 octane minimum” because they have sensors that listen for knock and pull out timing if they’re fed Regular instead of Premium. They’ll make more power on high octane fuel not because the gas is more powerful, but because they can operate at their designed ignition timing settings.

VE Made EZ

Another source of increased dynamic compression comes from an engine’s volumetric efficiency, which is a way of expressing how completely the cylinder fills with a fresh charge of air and fuel on the intake stroke. A 500cc single cylinder engine that ingests exactly 500 cubic centimeters of air per cycle is running at 100% VE, for example. Now, if you were raised to respect the laws of thermodynamics, you’re probably saying, “no mechanical system is 100 percent efficient!” and you are absolutely right, but there’s an interesting caveat. While the restrictions posed by the intake tract do indeed cause naturally-aspirated engines to normally operate below 100% VE, very clever engineering can allow an all-motor design to achieve over 100 percent under certain specific operating conditions.

This is possible because air, while not being very dense, does have mass, and moving mass has inertia. Careful design of the intake and exhaust manifolds, combined with specific valve timing, can take advantage of positive and negative pressure pulses reflected through the system in a narrow RPM range to ‘internally supercharge’ the engine and push VE over 100%. Though this was once confined to racing powerplants, increasingly sophisticated factory designs with variable valve timing and lift and variable intake geometry have made this effect worthwhile for mass production.

The net result of pushing VE over 100 percent is that the total compression ratio the engine experiences can be higher than the calculated static CR. Taken to the extreme, adding boost in the form of turbocharging or supercharging throws even more dynamic compression into the mix. Careful tradeoffs have to be made with forced induction engines to balance out the effect of boost with reduced static compression in order to keep detonation at bay – the efficiency lost by running lower compression ratios is more than offset by the increased power offered by intake pressurization. 

Approaching the Limit

Modern engine designs have seen compression ratio increased across the board, even for factory forced induction, and this is largely thanks to a much better understanding of what happens inside the combustion chamber during a power stroke. One look at a current engine’s piston and combustion chamber design will show you just how far technology has come from the days when the two-valve hemi head, with its combustion space shaped like half an orange peel, was the state of the art. Features like ‘squish bands,’ swirl-inducing peaks and valleys, and stratified charge strategies allow today’s engines to run compression ratios that would make those of just 20 years ago go ‘pop’ on the very same fuel. By figuring out what it takes to create a margin of safety for the knock threshold but still increase compression ratio, engineers continue to squeeze (pun intended) more and more out of every cubic inch of displacement. 

The Differential Difference

Adding the Right Traction to Your 4WD Truck

Before we dive right into how to turn up your truck’s traction ability, let’s first ponder a question that should be answered honestly. How do you anticipate driving your truck? Will it spend most of its time on the road, and will the off-roading you do plan on doing be mostly on gravel or compacted dirt? Will you be doing any driving on icy, snowy or wet conditions on pretty advanced off-road terrain? Do you anticipate driving through trails where very uneven ground, rocks and other obstacles and holes will be present? Taking these questions into consideration will greatly impact your decision-making when looking to upgrade your truck’s differential system(s). 

If you answered ‘yes’ to the first question above—congratulations! If you plan on sticking to mostly streets and highways or surfaces that are hard but not technically paved stretches of land, you really don’t have to worry about messing with your truck’s factory-equipped open differential, which is great. We understand the temptation to buy new parts is hard to fight off sometimes, but consider this a win and save yourself some time and money, and enjoy your truck as-is. 

We understand the temptation to buy new parts is hard to fight off sometimes, but consider this a win and save yourself some time and money, and enjoy your truck as-is…

For those who answered ‘yes’ to the second and/or third questions with the anticipation of driving through surfaces impacted by inclement weather that also feature more severe terrain, then you might want to consider shopping around for limited-slip or locking differentials. There are plenty out there to choose from, and it is best to still keep your personal driving scenario in mind when wading through these waters. 

Now, also keep in mind that whichever type of traction-adding components you choose will have a direct effect on different types of driving, wherein lies the importance of staying true to what you will actually be using your truck for. Bragging about having the latest, greatest, most expensive performance gadget on the market won’t do you a lick of good if it’s not used correctly, so do pay attention and choose wisely. 

Bragging about having the latest, greatest, most expensive performance gadget on the market won’t do you a lick of good if it’s not used correctly, so do pay attention and choose wisely…

Most light off-road duty adventures will be greatly improved with a rear limited slip differential, or better yet both a rear and front limited slip. These are the most widely used and common types of diffs since they cover such a wide application spectrum. What the limited slip does is shift a percentage of the torque to the wheel that has the most traction while limiting the slip on the wheel experiencing the least amount of traction (the one that is stuck in the air or free spinning on a patch of black ice). Torque is not always balanced between the wheels here, which will allow your truck to power through less than ideal surface situations with less of a chance of getting stuck. Icy, wet or uneven ground will pose less of a threat with the limited slip differential, so if you plan on encountering any of these foes on a regular basis, this traction-adding upgrade will definitely be money well spent. 

A locking differential will take your rig further than any limited slip setup can—no question. Now, do you absolutely, positively need to install a locker? Well, that all depends on if you want the power of a true 4×4, which means that all four wheels are getting power to the ground. Anything less than that might very well leave you stranded when attempting to take on some serious mud pits or extremely rough country. If you still plan on driving your truck on regular surface streets when you’re done on the trail, you’ll want to look into selectable lockers specifically. This will allow your truck to fire on all 4 wheels while off-roading, while still having the ability to flip back to an open or standard (stock) diff configuration with the flip of a switch. You’ll be able to beat the piss out of it off road, and still actually be able to drive it comfortably on surface streets just like normal. 

Within the realms of limited slip and locking differentials are other options to consider, naturally. There isn’t one system out there that can meet the demand of every driver of every truck for all conditions, so don’t get your hopes up. If you know and understand exactly what you’re asking of your truck, however, then you should already have a better idea of what side of the traction fence you’ll need to invest time and money into. The rest is merely addressing the details of personal preferences in order to fine-tune your driving experience. 

Strange Custom Cars at SEMA

Tank Treads, Fabricated Bodies, and Unique Paint Jobs

These custom cars at SEMA this year really push the limits on what it means to have a modified car. SEMA is a show which primarily focuses on aftermarket performance and cosmetic modifications on cars, and the companies who make them. But among the supercars, tuners, truck, and muscle you get some very creative, and strange creations from some innovative and possibly mentally unstable builders. These guys bring a unique perspective, and love them or hate them, they definitely set the bar for modifications.

These are our best and strangest custom cars we saw at SEMA this year in Las Vegas.

First up we saw a couple of snow track oddities that were not the Ford Bronco. The riveted one being a Custom Bug Out Jeep Gladiator built by Expedition Vehicle Outfitters with custom metalwork done to it. If one of the treads somehow falls off they have a spare Milestar Patagonia Tire attached to the back of the vehicle as well, just in case.

We also saw this Humvee with snow treads, but this one had a giant Battleship horn attached to it by ProdigyTV on youtube.

Artist Rocketbyz, showed off this Pikes Peak ready Audi Quattro with his signature neon paint splatter paint job. Reminiscent of all the previous art cars from the past.

Chevy Revealed a custom desert Off-Road concept truck called the Chevy Beast based off the Silverado platform. It has 5 link suspension, Four wheel drive and a body that looks like its built for the UNSC.

Next Up we have a couple of Custom Trucks, one low one hight. The blue one is a Hodson JRT10 Truck with a Jeep Wagoneer front end and a Viper V10 engine.

This one is a 6×6 C10 with 1000hp and a wing instead of a truck-bed built by Deberti.

Top 10 Tools Every Off-Roader Should Carry

Tools are something that make everyday life possible. They come in a full range from “must haves” to “would be nice.” Some people would argue that all you need is a credit card, and a satellite phone. Most of us would rather help ourselves than call for help. The better your tools, the easier difficult tasks can become; especially when working on vehicles. Even simple tasks can become impossible if you don’t have the right tools. So what do you need as an off-roader? Let’s take a look at the basics. 

Most of us would rather help ourselves than call for help…

1. Socket Wrench

Flat tires happen. One of the most often required, and useful tools you can carry is a wrench that can remove or replace lug nuts. There are many options available from a straight breaker bar, to the latest battery powered impact guns that are on the market. If you can’t remove a wheel, a simple predicament can leave you stranded. It’s also wise to carry several different sizes of sockets so you can have what you need when the time comes.

2. A Jack

This one goes with the lug wrench; a good jack. There are countless uses for a lifting device when you go in the dirt. They are needed to change flat tires, get unstuck, or fixing bent tie rods or suspension links. High-lift jacks are popular because they can do several tasks. Just make sure you know how to use it, and have good jacking points on your vehicle. If you don’t have solid jacking points that mounts to the frame, and also allow clearance around the body panels, you won’t even be able to use one. Good jacking points are heavy duty bumpers, sliders, and the wheel lifting straps available. Other options are manual scissor jacks, and hydraulic floor jacks. If you use a hydraulic floor jack, you will need something to place it on so it doesn’t sink into the dirt. A piece of plywood works, or you can get bolt on bases for this, or even specially made jacks.

3. Shovel

When you go off-road, you will get stuck; it’s inevitable. When you are stuck, it’s because you are impeded by something. That something is either dirt, mud, sand, rocks or snow. You don’t want to be removing any of that by hand. I learned my lesson when I went for a quick little drive in my CJ-7, and slid into a snow bank. I had to remove my license plate to use as a shovel. With a real shovel, I would have been done in 20 minutes. Instead it took hours. A shovel can be used for many other things as well; putting out camp fires, trail repairs, burying a tire for an anchor point, etc. 

4. Jumper Cables

Like flat tires, dead batteries happen a lot. A jump start from or to another vehicle only takes a second if you have cables. If you don’t have them, your options are never good. You should not scrimp when it comes to your jumper cables. There are plenty of cheap cables out there that are not up to the task. Get some good heavy duty cables with copper wire, not aluminum. A good set will last you for years, and be reliable when you need them. Just don’t loan the out. 

5. Bailing Wire and/or Zip Ties

We are hard on our vehicles when we go off road. Things break, they come loose, and they get damaged. You need something that will hold things together until you can make permanent repairs. Zip ties are great, but they fall short when you need to hold up anything that gets hot like exhaust or brakes. Bailing wire is pliable enough to wrap around things, and it fits through bolt holes easily. When you double it up, it’s very strong. 

6. Vise Grips

Vise grips are a valuable tool because they perform many tasks. If you have a damaged bolt or are missing the correct size wrench or socket, vise grips will work. They clamp tight enough to hold things together securely. They can also be used for crimping electrical connectors, or capping brake lines. You can even get special vise grips with smooth jaws for crimping off fuel or brake lines without damaging them.

7. Tow Ropes and Ratchet Straps

Many of us carry a box filled with different tow ropes, and ratchet straps. Tow ropes are for pulling another vehicle. Ratchet straps are for securing things. Chains should be avoided. Chains are heavy for one thing, and they don’t give. Tow ropes are designed to stretch, and don’t release as much energy when they break so they are much safer. Don’t forget to also throw a tree saver strap in your box. Ratchet straps are useful for securing every type of loads. They can be used to hold down a spare tire, or secure a camper in the bed of your truck in an emergency. They are a very useful tool.

8. Fire Extinguisher

I have personally never needed a fire extinguisher, but have saved many people who did. This is one tool that you hope you will never need, but is a must have to carry. You also need to know how to care for your extinguisher. The types that have dry powder in them can settle over time. When you need them, the powder can be clumped in the bottom, and not discharge properly. Make it a habit to inspect your extinguisher before you go out to make sure it’s still charged, and give it a little shake to keep the contents dispersed.

9. A Tarp

A tarp is another item that is handy to have because it has multiple uses. We can’t always control where our vehicle breaks down, or where we will be working on it. Part of being safe in the outdoors is keeping your body free from injury. You only need to experience laying in cholla cactus spikes, sharp rocks, or hot pavement once to realize the necessity of having a good tarp to lie on. It can also be used to keep you dry in the rain, or cool in the sun. You can drape it over your winch line to absorb the energy if it breaks. You can carry water with it. You can use it to wrap up dirty items that have to go inside your vehicle. How many of you have slept inside your truck bed with a shredded tire next to you? A tarp is handy for many things.

10. A Buddy

Two minds are better than one, but so are two trucks, two sets of tools, two jacks, you name it. Traveling alone is something we all do out of necessity, but when it comes to being prepared off-road, you can’t beat having someone else along. When something breaks down, or you experience some other setback, it’s always good to have someone else to throw ideas around, help out with repairs, or just give you a sense of calm that everything will work out. They are also great for re-telling the stories of your great trail fixes and ingenuity used to get back home.   

Best Modified Supercars at SEMA

Widebody Corvettes, Lowered Ferraris, and Amazing Lamborghinis

These mid engined supercars were built to be fast, but some builders at SEMA this year decided that they did not look cool enough. Widebody, air suspension, big wings and aero, three-piece wheels and of course fancy paint makes these stand out from their stock counterparts. Whether you are a purist or prefer modified cars, this set of cars we saw will definitely stun you.

With the new Corvette mid engined propelling the brand into supercar territory, many companies have jumped on the opportunity to transform the corvette body into something more stunning. Many jaw dropping wide body corvettes were on display here in Las Vegas.

If we raise our budget by a lot we get to see this cool Mint green Ferrari 488 that has been lowered, put on some nice white wheels and subjected to downforce. Brought to us by DNA Motoring.

Also brought to us by DNA Motoring is this AMG GT that looks like its ready for a track day and a clean car show at the same time.

FInally we have a couple Lambo’s that have gotten the treatment as well. This is youtuber TJ Hunt’s British Racing Green Lamborghini Huracan with a 1016 Widebody kit and sitting on Gold HRE wheels.

Classic V8 Muscle Cars

Clean and Low Restomods at SEMA 2021

Muscle cars and Hot Rods have been the backbone of SEMA since the beginning. Year after year not only do they show up, they are some of the most immaculate and classiest builds the 2021 SEMA Show has to offer. As we were perusing the show floor, we happened to see some beautiful examples. Lets take a peek at what V8s are rumbling around SEMA. (none probably, we’d be surprised if anything actually ran at SEMA)

Right off the bat are a couple of Chevelles so clean and modded you can barely recognize them!

Next we have this gorgeous blue Fastback Mustang and this slick Camaro. Both retain that classic styling but have opted for much more modern trim pieces, bringing these old geezers into the 21st Century.

Next up we have a couple of Old Chevy Trucks done in two completely different finishes. One With a nice slick green paint job that highlights those 50s body lines.

The other finished in a patina paint so strong it looks like it was pulled out of a lake! But there probably isn’t a spec of rust on this Apache.

Update: The owner of the build reached out to us and confirmed that this Apache is indeed 100% real patina.

“My Apache literally burned to the ground in the 2018 NorCal Paradise Fire and was on live tv doing so […] No rattle can patina, pure fire, then rain.  […] It was important for me to build this ride so people wouldn’t forget the devastation of that fire and when they see the truck, they know something survived.”Jason Fonte

Rare JDM Cars at the 2021 SEMA SHOW

Million Dollar Skyline GTRs, Special RX7s, and Widebody Nissan Zs in Las Vegas

Spotting a Nissan or a Toyota is something you can do in your grocery store parking lot, but the ones you find at the SEMA Show are a little bit more special. Actually, that is an understatement, these are some of the most sought after JDM cars and some of the most popular styles in the Tuner scene. In terms of JDM and Tuner cars there is all sorts of stuff at SEMA this year, some of which you will never see, and others that you will probably see on retail very soon, with a couple only being JDM inspired. Come check out these JDM gems that we’ve spotted at SEMA 2021!

We never were sold any skylines in the US until Infiniti G35, and so to say that they are rare here is an understatement, especially for these two GTRs. This is the first R33 GTR 400R to come to the US and only 44 400Rs ever made. Named 400R because of its 400hp output, this was the rarest and craziest Skyline to come from the factory. Specifically this is a 400R in Sonic Silver making it a one of 5 ever made. Brought out by Top Rank Imports, this Skyline definitely stole the show

Vehicle: Nissan Skyline GTR R33 400R Sonic SilverThe other one is a Midnight Purple II V Spec GTR which cost about the same as Lamborghinis, one of the rarest color combos and trim packages for the R34 GTR.

We also spotted this Origin Widebody S14 Kouki with a 2JZ VVti Stuffed in it. It is hard to look past those stunning custom headlights though, but you’ll probably be staring at the tail lights of this thing if you caught it on the street.

You know the brand new GR 86/ BRZ? HKS is already making a new exhaust system so that you can sputter and bang your boxer as quickly as possible.

We also Saw this yellow RX7 from Fortune Auto, sporting a full RE Amemiya kit with the aero headlights.

Check out this S30 Widebody Z from Extreme wraps. It might look different from a standard 240Z or 260Z because of the slicker aero front end, referred to as a G Nose.

Finally here’s a couple BMWs that have adopted a lot a of the JDM tuner style and incorporated them into their Bavarian Builds.

Best New Ford Bronco Performance Parts at the SEMA Show

Upgraded, Modified, and Off-Road Ready Broncos

After a couple decades, a few car chases and a whole lot of horsing around, the Ford Bronco is back for 2021! Well, it has been back for a minute now, but after a year we’re all trying to forget, we’ll call SEMA 2021 the official year of the new Bronco.

This year’s SEMA we get to really see what companies have come up with to further develop performance parts for the new Bronco Platform. Turning the Ford Bronco into a very capable machine is not a new concept, in fact it has been the name of the game since the Bronco first came out in 1965. Over the years we’ve seen time and time again that the Bronco is not just a practical suburban cruiser, with some upgrades the Bronco becomes an off-roading monster.

Here’s a sampling of some of our favorites at SEMA with some of the most insane versions coming from Ford themselves!

FIrst off is this Rhino Rack Bronco build by Doetsch Off-Road, fitted with all of the camping luxuries that you can think of! Upgraded Bumpers with LED lights, custom fenders from ADV Advanced Fiberglass Concepts to fit those Big tires on Fifteen52wheels, an extendable cover, and to Top it off, a Canoe!

We also spotted this Black Diamond Bronco from Havoc Off Road, upgraded with bead lock wheels, custom Winch Compatible front bumper, an orange skid plate, and some custom metal side steps to get you in this lifted Bronco.

Don’t like mountains? How about the Desert instead! Look at these race variants also from Ford. These have so many Custom parts that It would be easier just to list what isn’t changed.

Do you wan’t a tank but have a Family too? Well, Ford put some treads on this Bronco, so that you can simply avoid the lines at the Ski Lift.

Layin’ Frame

Some Basics On Slamming Your Ride

So you want to go low, huh? Ok, well there’s “just a few inches” low and then there’s “pavement pounding” low. Both are cool and have their place on certain vehicles, and while a modest drop in suspension does go a long way in terms of appearance, nothing compares to laying your car or truck out on the ground. Granted, there is quite a lot more to take into consideration if you’re interested in the latter option, but if you’re serious about taking your daily or show vehicle to the next level, it can be done, no matter what you’re driving. 

Asses the Situation

All vehicles are different, which means that the modification process to get said vehicle on the ground varies as well, as does the list of parts needed. Clearance plays a big role, especially with modern cars. With only so much available space at the front and rear, you may just have to get creative and pay close attention to tire selection as well as important wheel specs (width, offset, etc.). Every half of an inch counts, so do be sure to examine just which parts and pieces will need to be trimmed, relocated or cut out altogether in order to clear a path for adequate suspension travel. Classic cars in general have lots more room to work with at both ends, so take that in mind when deciding how to move forward with your project. 

Trucks, on the other hand have much more clearance space to play with at the rear. With only a bed floor standing in the way of axle and chassis clearance, there are just so many more options. Chopping up the bed is a necessity when ‘bagging a truck, with the easiest solution being to either cut out a portion of the floor that’s in the way, essentially. From there, you’ll have to decide to leave the area exposed, build a covered “bridge” or raise the entire floor up to keep a “stock” appearance. There are lots of ways to get the rear down on the ground with a truck, which makes this particular scenario mighty interesting. 

Equipment

If you’ve never ‘bagged any of your vehicles before, there are a few key components you’ll have to familiarize yourself with while prepping your ride for lower lows. Assuming that you will be ‘bagging your car or truck since hydraulic setups aren’t all too common these days (but they are out there), the air system is only as complicated as you make it. Air management systems have come a long way since the days of having to individually piece every single component out when building an entire air setup. 

The airbag itself is an essential component of the system, but it is not the most important (or even the most expensive). You’re going to find out quick that quality air management systems are worth every buck, as many of them have all the system’s ECU, valve manifold, and pressure and height control (in some premium packages) all built right into a small and convenient, easy-to-mount unit. From there, you’ll need to select an air compressor (or two) to keep the system supplied with enough air at all times. Figuring out air line plumbing can be a tedious process, but one that can still allow for creativity. Once everything is wired up and checked for problems, accessing this orchestration of components is made simple though a programmable controller, or if equipped, an app installed on your phone. 

The airbag itself is an essential component of the system, but it is not the most important (or even the most expensive)…

While that does sound like quite a bit to worry about, it is—to an extent. There used to be much more involved, but there are lots of plug-n-play type units that helps simplify installation. 

Alterations

Cutting and altering the chassis and other factory components (depending on the vehicle) is essential when it comes to “laying frame”. While it’s a big step to take, it’s important to not take these steps lightly, and ensure that an experienced person take the lead, even when it comes to simple rear frame notches. Using a plasma cutter, cut wheel and drill all require some know-how to deliver the best results (which includes your safety). Always remember the golden rule when working with these tools—measure twice and cut only once!

Half and Full Frame Packages

A lot of classic muscle car and truck projects have the luxury of a wide selection of well-crafted front, back and full chassis systems on the aftermarket. These take a lot of guesswork out of building the best air ride setup possible. Since the existing frame on vehicles of a certain age can be “iffy” at best, selecting these options could really come in clutch. These types of setups do offer far more than the ability to go up and down, as optimum ride quality is the ultimate objective with these, which will only make your project better in the long run. These kits do run on the high side when it comes to suspension components, but they are definitely worth the dough. 

‘Bagging your ride is a big step, that’s for sure, but once it’s done and all the kinks are worked out, it really is worth the effort. Nothing gets more attention on the road than a car or truck that can change the height of their ride with a simple push of a button. Even at rest, there’s nothing quite as cool as a vehicle resting on the ground with the wheels and tires tucked far into the fenders. Your ride will definitely catch all the attention in the parking lots at work, at the grocery store, as well as at any car show you take it to. 

Nothing gets more attention on the road than a car or truck that can change the height of their ride with a simple push of a button…

Don’t fall into the trap of investing only the minimal amounts of money and time when slamming your vehicle. You definitely get what you pay for as far as parts and components go, and there is no such thing as “cheap” quality labor (unless you’re doing the work or have a friend or relative willing to help out).

Don’t Call It a Comeback:
The Resurgence of the Compact Truck

By “compact” truck, we really are discussing the modern, smaller-than-full-size pickup that is commonly referred to as a “midsize” model. Long gone are the days of the true mini-truck, so if you’re thinking those are making another appearance at new dealer lots, keep dreaming. The classic S-10, Ranger, Tacoma, Hardbody trucks are machines of a past generation. They had a great run, and are great projects if you can get your hands on a good specimen, which are still readily available. “Mini” sized price tags are also a thing of the past, as today’s compact/midsize truck models can enter full-size budget territory pretty darn quick, but there are some bright sides to that reality. 

“Mini” sized price tags are also a thing of the past, as today’s compact/midsize truck models can enter full-size budget territory pretty darn quick…

The Chevy Colorado is still going strong, and it is larger than ever. In 2019 Ford rereleased the Ranger back onto the market, which is great to see, but it too, is much larger than its last generation that phased out in 2012. Oh, and the Tacoma? It most certainly leads the midsize pickup scene, as it remains one of the most popular on the market. There are other established players in this category that boast devout followings and comparable specs, roomy cabs and available bed lengths that justify their respective MSRP figures, and there are new models trying their best to compete for a place in this very interesting segment. 

So what makes the midsize truck marketplace so exciting, anyway? Well, automakers really are looking to deliver the most bang for your buck in this category. Even though we can all complain that the cost of modern midsize truck are catching up with full-size pickups, these slightly smaller models will come in cheaper than their larger counterparts at the end of the day—there’s no doubt about that. A little sacrifice of space is par for this course with these models, however, these trucks can be jam-packed with features, which make maximizing their function and catering them to meet your exact needs becomes the fun part. 

…automakers really are looking to deliver the most bang for your buck in this category…

Right off the bat, midsize trucks are easier to maneuver than the big ones given their natural nimble size. Just because they’re a tad bit smaller though, don’t move too fast and assume these compact haulers can’t pack a punch to contend with the true heavyweights, because they absolutely do. If you need them to haul stuff around or tow heavy loads, they’ve got you covered. Looking to hit the trails and head off-road? You can do that with these trucks, no question. If you need a commuter vehicle, but want the true utility that only a pickup truck can offer, there are engine configurations with these midsize wonders that are ultra efficient and sip lightly at the pump. There really is a compact truck for every driver out there. 

Since muscle is an obvious concern when truck shopping, let’s take a look at some of the beefier compacts in the field. The Nissan Frontier, which is a familiar face in the compact genre, received a standard option motor upgrade last year, in the form of a healthy 3.8L V6 with a respectable 310HP output along with 281 lb-ft of torque. This engine will most definitely make its presence known while hauling, towing and ripping around off the beaten path. The Ford Ranger also puts up some impressive numbers from its 2.3L turbo 4-banger—270HP and 310 lb-ft of torque. It has proven to also tow and haul great, which is definitely something to consider when comparing to a full-size brute to get the same job done. 

Suspension wise, the Colorado/Canyon with its off-road-ready ZR2 package, is an upgrade that brings the price of admission up a bit, but don’t feel too guilty about over spending on your dirt hobby here, as the the ZR2 equipment also earns rave reviews on paved roads as well. The two-inch suspension lift utilizing quality components and the 3.5-inch wider track is an investment rather than an added expenditure, as the premium suspension package will serve its owner well during work and play. Same goes for the Tacoma with its TRD package, or better yet, its TRD Pro tier option. The latter selection comes correct with an upgraded skidplate under the engine, Fox internal bypass shocks, an electronic locking differential, an inclinometer with pitch and roll displays, 16-inch wheels with beefy A/T tires, improved off-road driving modes—and the list just keeps on going from there. 

While most buyers are interested in midsize trucks that do big truck things, there is another crowd that is interested in overall value and efficiency. These are mostly the folks who don’t intend to work their truck too hard, or play too rough with it either, but still want to have the utility of a truck on hand without it costing too much to operate. For these guys and gals, Ford has released an ultra affordable wildcard onto the market that may get mixed reviews from the truck audience. The Maverick is less expensive than the Ranger right off the lot as MSRP starts under $20K. The standard hybrid powertrain and impressive MPG will only continue to keep more money in wallets. Before this truck is prematurely written off for its lack of power, just know that Ford’s new budget-minded midsize truck is also available with a 2.0 turbo I-4 that boasts 250HP and 277 lb-ft of torque—definitely no slouch.

The variation of standard and optional equipment in the realm of midsize pickups is more than enough to assist in piecing together the right truck at a lower price of a comparably equipped full-size. This is what has made this segment of vehicles such a hot commodity among today’s truck buyers. While there may not be too many outright steals to be had at the dealership, there is plenty of room to better budget your money to get the exact truck that you need/want. Bigger isn’t always better, and the ever-growing fleet of midsize wonders are looking to drive that point home with everything in their power. 

Build an Off–Road Truck With a $10K Budget

Get the Parts You Want and Need

$10,000 is just the right sum of money that can be stretched a very long way when spent correctly. Think about it—if you’re in the market for a new truck, that $10k can quickly evaporate on dealer upgrade packages that aren’t really worth that much money when it comes down to it. It may buy a good amount of factory ‘premium’ add-ons and accessories, but they might not even be the key items you’d need to work towards building the legit off-road truck you want. Instead, you can take that cash and strategically spend it on quality goods from reputable aftermarket manufacturers who specialize in products that you actually want and need. 

Even if you’re looking to outfit an older truck that you may have had around for a while or have finished making payments on, that same $10,000 will come in clutch with turning things around for the better. It’s cheaper than going out and buying another brand new truck, that’s for sure. So why not invest some money into an older pickup and starting having some off-road fun with it? 

…$10k can quickly evaporate on dealer upgrade packages that aren’t really worth that much money when it comes down to it…

Rolling Attire

Tires

There are a few key categories of parts you’re going to have to start shopping around in if you plan to make a go of transforming your truck into an off-road worthy rig. Right out the gate, you’ll want to address your truck’s tire situation. You’ll want to still steer clear of dealer-upgraded rubber here, as whatever tire they’ll try to sell you will still be geared toward on-road above off-road performance every time. Instead, take a look at tires that are designed to take on dirt, mud, sand, and rocks—all the types of terrain that you’ll be looking to combat while out in the great wide open. Specially designed tread patterns and beefier sidewalls will most definitely be your friends here, and will totally be worth the money you’ll invest in them. 

Wheels

While you can put bigger, better tires on just about any wheel, it’s probably wise to spend some money on a set that is designed to better handle off-road situations. Bead lock equipped wheels will prove to be invaluable when you’re out on the trail as they provide clamping power to maintain the tire seal instead of relying on inflation pressure alone to keep them held onto regular wheels. This is quite an advantage since lower tire pressure is often used to improve traction on rough terrain. Plan on spending a few thousand of your budget on new wheels and tires. Of course, you could spend a lot more on them but that’s all based on your own personal preference and taste. 

Ride Height

Suspension

You can get away with spending minimal money on an entry-level leveling kit here and still be able to fit larger wheels and tires all around, and get the look of an off-road truck. While that may make your rig look the part (kind of), you could (and should) go a step further and look into more complete lift kits that will get both ends of the truck up a few inches higher, thus giving your truck the added ground clearance that is imperative in true off-road situations. While you don’t have to get your truck crazy jacked in the sky or anything, even a 4-inch lift will do. 

Shocks

Whichever way you end up lifting your truck, don’t forget to upgrade the factory shocks with a set designed to take on and handle increased dampening abilities. Even if you think you might need remote-reservoir shocks, invest in them. They can take much more abuse, and a lot of them can be manually adjusted to better fit the specifics of your particular truck. Of course, they cost more than simple upgraded OEM replacements, but are well worth the money. 

Underbody/Rocker Protection

With a truck sitting at a higher than stock altitude, its underbelly becomes more susceptible to damage from debris and other obstacles while bombing the trails. To keep vital parts and systems protected from an unforeseen accident, there are plenty of panels and skid plates available that bolt on and offer peace of mind while you’re out having fun. These aren’t a requirement, however, but a strong recommendation when it comes to defending your rig against the elements. 

Accessories Make the Truck

Lighting

Even if you don’t plan on being out in the middle of nowhere past sundown, upgrading your truck’s headlights to brighter HID/LED output wouldn’t be a bad idea. Heck, while you’re at it, it couldn’t hurt to wire up some bright auxiliary lighting sources as well. LED light bars, spotlights, or any other type of bolt-on light housing will end up getting a lot of use even if you don’t intend to use them often. You’d be surprised at just what kind of pitfall you could avoid with sufficient nighttime illumination in pitch-black visibility.  

Winch

You really don’t ever need a winch until you absolutely need one. Whether it’s your truck that gets stuck, or a buddy’s rig that needs to be pulled out of a sticky situation, you’ll be glad to have a dependable get-out-of-jail pass at your disposal.

Brakes

A proper off-road truck definitely deserves an upgrade or two in the braking category. Larger, heavier wheels and tires can rob your truck’s factory braking system of precious stopping power. Aftermarket rotors and calipers are an easy solution, and if your truck is still equipped with rear drum brakes, converting them to discs will dramatically improve braking abilities.

Performance

HP & Torque

There are a lot of combinations to choose from in this department ranging from simple air intake systems, custom exhaust, digital programmers, and a ton of other products designed to make more power. Pricing and level of skill required for at-home installation vary, so choose wisely and know when it’s best to fork over the extra cash for a pro to handle the install. 

Locking/Limited Slip Differential

You may not think this upgrade is necessary until you experience the struggle to make enough traction firsthand. Installing a locking or limited slip diff will allow for your truck to spin both wheels on an axle, which really comes in handy while keeping or regaining precious momentum on tricky types of terrain. The boost in confidence of where your truck can go after installation will astonish you. 

The Great American Pickup Trucks

Examining Chevy C/K & Ford F-Series Platforms

While this is not meant to be yet another Chevy versus Ford truck debate, it is more of an examination of some of the differences, the similarities, and what made both so popular among their individual fan bases. Now, the battle between Bow Tie and Blue Oval groups will never die—surely you’ve experienced some degree of it over the years. When it comes down to the core of the situation, it really is a brand preference thing—Coke VS. Pepsi, Duracell VS. Energizer, Burger King VS. McDonalds, you get the idea. While the decision of what vehicle to purchase far outweighs what to eat or drink for lunch, there is something to be said for the slight modifications between competing brands and what they bring to the table. 

Both C/K and F-Series pickups were the flagship vehicles in the work truck segment for both Chevrolet and Ford respectively. Both brands held the top shares of sales back when C10 and F-100 model trucks were brand new, and they have since laid the foundation for modern Silverado and F-150 models to still rule supreme in today’s marketplace. 

Both C/K and F-Series pickups were the flagship vehicles in the work truck segment for both Chevrolet and Ford respectively…

Ford’s first generation F-series pickup went by the F-1 name, which was introduced in 1948 and lasted until ‘52, when the F-100 title was put into place just one year later. For 31 years, Ford’s F-100 pickup helped hard working Americans earn their livings behind the wheel of a truck that was one of the top selling models in the country. For diehard Ford enthusiasts, the F-100 was the only game in town when the time came for purchasing a pickup, while neutral consumers who bought one did so based on its own merit. While the F-100 had a pretty good run for itself, it did help pave the way for Ford’s F-150, which hit the streets in ’75. In its first 9 years (while the F-100 was also still for sale on the market) the F-150 quickly rose to even higher popularity, which led to the F100’s graceful exit in ’84. 

While Ford did have a jump on the pickup market in the early 50’s with their updated F-Series truck, it wasn’t until 1960 when General Motors rolled out what was arguably the most popular American pickup during its run. When the C/K platform began rolling out at dealerships throughout the country, the buzz behind GM’s sleeker looking, smoother riding pickup truck was growing at an impressive rate. The C-10 era C/K rode out 27 years, and finally gave way to a new generation, the OBS (old body style or original body style), which ran a 10-year span until the Silverado was released in ’99, and we all know how well that changeup went over. 

While there were other pickup trucks available to consumers during the CK/F-Series heyday (we see you Dodge fans), it was these two that sat alone with a commanding market share. At first glance though, both the Chevy and Ford trucks in the 60’s and into the 70’s didn’t really stand out that much from each other. Sure, you could easily tell one apart from the other, but there were no glaring differences like what a Jeep Gladiator would look like in direct comparison. Both Chevy and Ford models offered two similar bed styles, the Fleetside and Stepside (or Styleside and Flareside as Ford dubbed their versions) but those didn’t really make much of a difference from one make to the other. Small exterior changes like headlight shapes and grille styling (and constant restyling) help greatly in determining one year from another. It’s really all on how you look at these two trucks during these times and which particular style speaks to you more. Either way, they were both uniquely qualified to share the spotlight as America’s best looking working class sweethearts. 

C/K and F-Series pickups were looked at as being very modernized, forward-designed versions of what many thought of trucks at that point, which was simply clunky and overly utilitarian. To help change this rationale, both Ford and Chevy designed their chassis to improve overall ride quality with and without full payloads. The F-100’s 2WD model was given a twin I-beam front suspension with coil springs while the C10 featured an independent front suspension while utilizing torsion bars, which were soon ditched for coils as well. Chevy soon added independent coil trailing arms to their C-10 platform, giving it improved feel, especially while carrying a full load. Both companies were always looking for new ways to give their fans new solutions when development permitted. It was these early upgrades that eventually led to the technological wonders we have in place today in the form of highly evolved suspension systems in pickup trucks. 

In the age of restoration and customization, the C10 and F-100 platforms are nearly sitting on even ground, although the slight advantage might lean a bit in Chevy’s favor. The aftermarket support for both trucks is huge, making it easy and less stressful to order the parts needed for a full suspension rebuild, body and interior renovation, as well as rebuilding or replacing the factory engine. The simple fact is that classic Chevy and Ford trucks are still as popular now as they were back when they were new. Newly developed products have allowed builders to not only build them to ride and handle better than ever, but they can now be so finely tuned to meet individual needs down to the smallest of details.

The simple fact is that classic Chevy and Ford trucks are still as popular now as they were back when they were new…

There is no runaway winner of the timeless debate between Chevy and Ford trucks, and there really doesn’t have to be. Devout fans and customizers, no matter which brand truck they choose to build, are the true champions because of their unwavering dedication to preserving the machine of their preference. Whatever the make, model or year of the truck, there are parts to make it not only whole again, but better than any member of the Ford and GM engineering teams could’ve ever dreamed possible for these old, yet highly desirable work horses. 

Getting Ratio’ed

The Importance of Power to Weight

How do bees get airborne? How do hummingbirds gracefully hover? How do helicopters chase you out of your favorite spot at 2:30 on a Sunday morning with that stupidly-bright spotlight? Lots of power moving as little weight as possible. 

Horsepower to the tires has big implications for automotive performance, but like everything else about going fast, it’s not about one number. What’s more important is how many pounds each horsepower has to move around, and the overall power-to-weight ratio is the real determiner of more than just how quickly a car accelerates. Today, we’re going to talk about some things you might not have considered before when thinking about how much power you need to achieve your performance goals, or on the flip side, how light your car has to be with the horsepower you currently have.

What’s more important is how many pounds each horsepower has to move around…

Defining Terms

Power to weight ratio is just what it sounds like – how much power is available, compared to the mass of the vehicle. You can express it in any unit of measure you prefer; our European friends will like kilowatts and kilograms, but US readers will probably find it easier to relate to how many pounds each pony has to carry around, so that’s what we will stick to here. To give you some perspective, here are a few examples of production car power to weight ratios, based on factory figures:

• Toyota Prius (2022): 121 HP (net power), 3,010 pounds curb weight = 24.9 pounds per HP
• Honda CRX Si (1987) 91 HP, 1,953 pound curb weight = 21.5 pounds per HP
• Mazda Miata (1997): 129 HP, 2,180 pound curb weight = 16.9 pounds per HP
• Dodge Challenger SXT V6 (2021): 303 HP, 3,858 pound curb weight = 12.7 pounds per HP
• Honda S2000 Club Racer (2008): 237 HP, 2,765 pounds curb weight = 11.7 pounds per HP
• Acura NSX Type R (1992): 270 HP, 2,712 pound curb weight = 10.0 pounds per HP
• Chevrolet Corvette 1LT Z51 (2021): 495 HP, 3,366 pound curb weight = 6.8 pounds per HP
• Dodge Challenger SRT Super Stock (2021): 808 HP, 4,429 pound curb weight = 5.5 pounds per HP

Just for fun, let’s throw in a couple of fairly tame sportbikes:

• Kawasaki Ninja 400 (2022): 45 HP, 541 pounds curb weight (includes 175 lb rider) = 12.0 pounds per HP
• Kawasaki Ninja 650 (2022): 67 HP, 598 pounds curb weight (includes 175 lb rider) = 8.9 pounds per HP

We can draw some initial observations from these examples right away. First of all, the two motorcycles shown are generally considered pretty weak sauce by two-wheel standards, but they are still in a totally different realm than most cars. Second, there are some cars we’d all consider “fun to drive” that don’t have very good power to weight ratios – more on that in a minute. Finally, the top of our list has a Challenger model that is an absolute whale, but thanks to an equally gargantuan engine, is in a class of its own in terms of power to weight.

The point to be made here is that cars (and motorcycles) that are lighter in absolute terms tend to be more enjoyable for enthusiasts even if they are only middle-of-the-pack in horsepower. That’s because weight, or more correctly mass, affects more than just straight-line acceleration. 

Massive Implications

Because inertia applies in all directions, not just to acceleration, with all other factors being equal a car that weighs less overall will need less tire, less suspension, and less brakes to achieve the same results as a heavier but more powerful one with the same power to weight ratio. Conversely, better tires, suspension, and brakes will be more advantageous on the lighter car as well. 

As time has passed, increased safety requirements for side impact air bags, crush zones, and a hundred other advances, combined with customer demand for things like heated power-adjustable seats and Bluetooth-connected in-car entertainment systems have inexorably pushed curb weight up, even for cars built to be lightweight. The 2014 5th Gen Camaro Z/28 is a good example, being available without air conditioning or a stereo, but the need to incorporate government-mandated audio feedback for turn signals, seat belt warnings, and whatnot meant that it still had to have at least one speaker.

So far, though, the increase in curb weight of the average car has been more than offset by the increase in average horsepower. But it also means more capable (and more expensive) suspension, tires, and brakes are required. It’s also often said that “light costs money” and that’s very true when you are trying to achieve the same results with less weight, like substituting an aluminum block of comparable strength for a cast iron block in the same engine design. On the extreme end, carbon fiber body panels, aluminum frames, and other semi-exotic materials and manufacturing methods can be employed by the factory.

Simplicate and Add Lightness

Fortunately, even if you’re on an instant ramen budget and spending a ton of money on featherweight aftermarket parts isn’t in the cards, all is not lost. Manual cloth seats from a base model car can replace the seven-way heated leather ones you have, for example, and you may even end up money ahead by selling them to some would-be baller looking to upgrade. AC deletes, while trending toward the hardcore end of the spectrum, are typically good for some significant weight savings, and if you still want to keep cool and not make your own gravy while sweating out the summer, we bet that without even trying too hard the typical enthusiast could find at least 20 pounds of loose junk in the car that you have been Ubering around for free. Those passenger seats sitting in the pits at the local autocross or dragstrip grudge night take zero dollars to do, and they give you a place to sit and hang out with your friends in comfort while you wait for your run group.

Fortunately, even if you’re on an instant ramen budget and spending a ton of money on featherweight aftermarket parts isn’t in the cards, all is not lost…

There’s something really satisfying about making your car faster without adding a single pony under the hood, and all it takes is a little bit of imagination and some elbow grease. As a bonus, you’ll be able to corner harder and brake later – sure, it’s not as sexy as putting on a turbo or jetting up the nitrous, but it’s a tried and true speed not-so-secret. 

Mid Travel vs. Long Travel Off-Road Suspension

Which Is Right For You?

Every truck and its owner are different. While that may sound like stating the obvious, it is very much true, and determines the relationship of how someone drives their pickup. Most folks are more than fine with leaving their truck bone stock, and hardly ever venture far from paved roads. Modern trucks are easy to drive, and are often treated as a regular car—with a handy bed that comes in clutch during those sporadic trips to Home Depot. While this picture comes off as being dramatically domesticated, it’s really not that far off from how it really is, except for the truck owners that have a sharp taste for far more action and adventure. 

Now, the type of action we have in mind here is off-road adventure, and what exactly that means to each individual truck owner. While a good percentage of them tend to lean toward the mild side of things (which isn’t a bad thing at all) there are a slimmer number of truck fiends that crave the most capable, unstoppable setup imaginable. Of course, we’re talking about the timeless debate between mid- and long travel truck suspension systems, and what it really means to build and drive them. 

The Deciding Factor(s)

Which is the right one for you? Well, only you can really answer that question. There’s a lot to take into consideration—some are the obvious cost and labor issues, and others may be less glaring and require careful attention. You’ll have to seriously address the pros and cons of how mid- and long travel suspension systems stand to benefit your particular situation and how they could possibly negatively affect you world as well. 

Materials

While there is no real “negative” surrounding either of these suspension upgrades as they are both far superior than factory specs if you plan on doing any type of off-roading—even in the slightest. Mid-travel setups are far more accessible than their long-travel counterparts, as most basic front kits consist of at least an aftermarket uni-ball upper control arm, a quality coilover with reservoir, an upgraded leaf spring pack, axle flip kit, and a reservoir-equipped shock. All are fairly straightforward to install, and all of these components bolt right into place. 

Mid-travel setups are far more accessible than their long-travel counterparts…

On the other end, long travel setups are far more involved as you’re looking at aftermarket upper AND lower uni-ball control arms, an extended axle shaft, tie rod extension, coilovers with reservoir, and strategic weld-in reinforcements in the way of braces/gussets for optimum strength. You’ll see a beefier leaf spring pack here at the rear, which will be placed underneath the axle. This means that bolting on shocks in their factory mounting points will not be possible. You’ll have to get creative here to make it work, whether that means relocating the mounts somewhere else of going right through the bed utilizing a bed cage. Don’t expect things to be as easy as with mid travel setups here, it’s far more work, but there is a larger payout here once the dust settles. 

Cost

Long travel suspensions cost much more to build, obviously, but in more ways than you might think. Aside from the suspension components themselves, you’ll also have to take factory fender panels out of the equation, and think about wider, fiberglass options instead since the width of the front suspension is extended and the rear travel is extended so much over stock. On the bright side, you’ll be able to run comfortably with 35” tires without having to endlessly cut and trim until there’s nothing left of those original fenders anyway. 

Type of Driving

Think of mid travel suspension good for casual trail cruising, some moderate rock climbing, and increased general access to rougher conditions that wouldn’t otherwise be comfortable in a stock truck. You’ll have a lot more options open to you as far as terrain you’ll be able to take on, but take those options and multiply them—that is the true capability of long travel. But is long travel feasible for daily driving duties? Sure, why not? It’s really a personal preference with the additional width up front and all, but it’s just like anything else, you’ll adapt. 

Bottom Line Pros and Cons

Let’s start with mid travel first. You’ll be able to install the suspension components comfortably at home without any specialty skills or tools. The parts involved are fewer and relatively inexpensive, and you’ll still be able to upgrade tire size—think 33s without having to cut/trim fender wells too extensively. While you’ll be able to comfortable drive your truck daily and still have more confidence off-road, you will still be limited to more extreme conditions that only a long travel will be able to handle.

Long travel suspension parts do add up fast and installation isn’t always for the everyday DIY builder at times. You’ll most likely have to do some welding, so if you don’t have this skillset under your belt, you may have to outsource or wrangle a buddy who can help out. Save part of your budget for replacement fender panels, and prepare to lose valuable bed space for that bed cage and probably a spot to throw your spare. Don’t let all those factors stop you from seeing the job through—once everything is done, the off-road landscape will be your oyster. 

…once everything is done, the off-road landscape will be your oyster…

In the end, you’ll have to make the decision of just which scenario is right for you. Are you down for the higher cost and more in-depth installation of the long travel? Is it really worth the extra money and extra headaches? Are you fine with still being able to having more paths opened to you while still being limited to only where long travel-equipped trucks can travel? Weight it all out, sleep on it, talk it over with your better half, and then start building the truck that is right for your own personal situation. 

Ten Euro Standouts

The Most Influential US Imports from the Old World

After the end of the Second World War, America emerged unchallenged in terms of manufacturing and industry. All the domestic car companies who had turned their might to supply the “Arsenal of Democracy” were quickly pivoting back to products designed to fill pent-up civilian demand. And yet, in Europe just as in Asia, war-ravaged economies saw the US domestic market as a way to jump-start their own reconstruction, despite formidable barriers. 

…war-ravaged economies saw the US domestic market as a way to jump-start their own reconstruction, despite formidable barriers…

For the next five decades, German, Italian, English, and French manufacturers worked to solve the puzzle of selling stateside. While there were many misfires and failed attempts along the way, we also received a lot of cars that stood out for their innovation, performance, or just plain lovable weirdness. These weren’t the Porsche and Ferrari sports cars, but often very ordinary designs that rose to greatness. Here’s ten Euro cars that all made their mark on the United States, for a lot of very different reasons. 

1949 – Volkswagen Beetle

A literal “people’s car” designed for a dystopia that thankfully never fully came to be, the Volkswagen Type 1 finaly reached mass production just in time to help a shattered Germany get back on its feet. It went on to see more than 21 million cars sold worldwide over its very long production run, and although it started out as underpowered and unsophisticated even by 1930s standards, the Bug went places nobody could have imagined. In every form of motorsports from road courses to drag strips to Baja, the VW was embraced and found success. In the driveway, it taught Boomers to wrench without fear (and how to drive stick – once you master a VW transmission, everything else is cake), and it’s pretty safe to say that as long as there is gas to burn, somebody will be turning out new air-cooled flat-fours for them.

1960 – Austin Mini

Not everyone knows that the UK spent almost ten years after WWII with rationing of certain items still in effect – the war had taken a high toll in manufacturing infrastructure and massively disrupted public transportation. Against that backdrop, the Austin Mini debuted in 1959 and a year later, left-hand-drive versions began export to the US. While the total numbers that made it to our shores weren’t spectacular (approximately 10,000 over seven years), the impact they had is hard to understate. Here was the first widely-available transverse engine front wheel drive economy car most people ever experienced, and its space-efficient two-box profile and drivetrain layout set the standard for tens of millions of cars from dozens of makers in the subsequent years. 

1968 – Fiat 124 Spider

Designed by Pininfarina, the little convertible Fiat somehow managed to be an Italian sports car in the same mold as England’s classic roadsters, but with ever-so-slightly better reliability. First appearing in the US in 1968, the model managed to soldier on all the way into the early 1980s, with upgrades in engine displacement along the way. Many say that the Mazda Miata was an homage to those English roadsters, but the commercial success of the Fiat Spider made it a more direct ancestor (even if it wasn’t good enough to keep the company in the US market.)

1974 – Fiat X1/9

This toon town caricature of Italy’s vaunted mid-rear-engine exotics never made more than 75 horsepower from the factory, was undrivable by anyone taller than six feet, and was abandoned by its parent company in 1982 to be picked up by Bertone and limp on in the US (the car’s largest market by far) through 1987. It was also a riot to drive, and foreshadowed the MR2 and even the Fiero as an affordable mid-rear two-seater.

1982 – BMW E30

It’s not throwing shade on BMW to call the E30 3-series their version of the Civic. It revived the market formerly served by the classic 2002 for enthusiasts who wanted a compact car that was fun to drive and affordable. In the secondary market, it became a tuner superstar thanks to its easy availability and the fact that all the fundamentals were done right. 

1983 – Audi Quattro

If you like the GT-R, EVO, and WRX STi, you can thank (at least in part) Audi for blazing the trail. The original Quattro hit the US market at a time when the only other car with full-time AWD was the AMC Eagle. While the Eagle was special in its own way, it was no performance car, and the Audi’s turbocharged inline 5-cylinder and rally pedigree were something totally new in America. Though the first Quattro sold in miniscule numbers in the USDM, it was the vanguard of things to come worldwide.

1983 – Mercedes W201

Not to be outdone by their rivals at BMW, Mercedes jumped right into the compact market with the 190-series “baby Benz,” gifting the W201 chassis with a sophisticated suspension and a rev-happy inline four cylinder engine in various displacements. While it didn’t gain the same traction with street tuners in the US that the E30 did, it found great success in road racing worldwide and changed Americans’ conception of Mercedes as either Gullwings or diesel-powered living room couches to a viable performance brand.

1983 – Volkswagen Golf/Rabbit GTI

Though the VW Golf Mk1 arrived in the US in 1975 (and was called the Rabbit, for reasons which are not entirely clear) and overseas markets got the hot rod GTI version a year later, Americans would have to wait until 1983 to get a Rabbit GTI. While the 90 horsepower 1.8 liter engine (uprated to an even 100 for 1984) is nothing special by today’s standards, in the light and well-engineered Mk1 chassis it was a paradigm shift in economy car high performance. Looking back, the “hot hatch” category was inevitable, but Volkswagen got it right first, and created a legend that continues to this day.

1984 – Volvo 760T

Sure, the Volvo 122S/Amazon had European rally cred in the 60’s, and the P1800 looked exotic and cool to American eyes (and even had a star turn as Roger Moore’s ‘hero car’ in The Saint TV series), but by the mid-Eighties, the Swedish car-maker was known for safety and cars that could be accurately modeled with LEGO blocks. Then, in 1984 US buyers were offered the turbocharged 760T, which not only led to the widespread misuse of the word “intercooler” but more importantly gave us a quick, practical, and safe car with a bulletproof boosted RWD drivetrain. To this day, “turbo bricks” still have a small but very enthusiastic owner base in America.

1985 – Merkur XR4Ti

You knew you weren’t getting out of this without us throwing in at least one really weird one, and the Sierra XR4i from Ford’s European branch certainly checks that box. Rebadged and rebranded as the Merkur XR4Ti in America and sold through 800 or so Lincoln/Mercury dealers, you wouldn’t mistake one for anything else thanks to the ‘aero’ nose, biplane spoiler, and notch-profile 3-door hatchback body. The FR drivetrain layout was motivated by a 2.3l iron-block inline four topped by a turbo pushing 14 PSI – the same engine in the SVO Mustang and Thunderbird Turbo Coupe, minus the charge cooler, with 175 horsepower on tap in manual transmission cars. Ultimately, sales didn’t justify updating the model to meet increasingly tight safety regulations, and the strong Deutschmark didn’t help. The short-lived experiment left a bad taste with Ford US, and we wouldn’t see another Euro-manufactured model from the Blue Oval again until the Ford Focus RS arrived in 2016.

So there’s our list – we’ll admit that it’s subjective, and reasonable people can disagree over things like this. What USDM cars imported from Europe would you put on your own list of most influential models? 

What is VTEC?

How Honda Created a Legend With a 10mm Pin

What does it take for one specific bit of simple, yet brilliant technology to achieve meme status? In the case of Variable Valve Timing and Lift Electronic Control (better known as VTEC), it started out as a way for Honda to offer better performance while still meeting emissions standards and displacement limits at the start of the 90s and arguably gave the company’s automotive division the same kind of high tech street cred their motorcycles already enjoyed. 

The original VTEC led the way for a whole new slate of variable valve actuation systems from practically every major manufacturer, with a wide range of complexity and effectiveness seen today. Back in the day, it would be hard for anyone to imagine that a simple pin moved by a hydraulic actuator could become such a legend, but in retrospect it seems like one of those “why didn’t I think of that?” inventions.

Best of Both Worlds

To understand the impact of VTEC on the automotive world, it’s worthwhile knowing exactly what it is and what it isn’t. Conventional piston engines rely on one or more camshafts, turning at one-half engine speed, to control the motion of the intake and exhaust valves. No other single aspect of engine design has a bigger effect on performance, economy, or emissions than the timing and intensity (for lack of a better word) of valve events, and for engines without some sort of variable valve control, every compromise gets carved in steel at the factory and can’t be changed without getting into the ‘wet’ part of the engine. 

This is important because the physics involved in getting air and fuel into the cylinder and exhaust out mean that a cam lobe design optimized for low-end grunt is going to be unhappy at high RPM and vice versa. At lower speeds, cylinder-filling is improved by having relatively small valves with low lift, trading away some pumping losses in exchange for keeping velocity up in the intake tract, but towards the upper end of the RPM scale, bigger is better and low lift will kill airflow. Similar tradeoffs for valve duration (the part of the 720 degree four-stroke cycle when the valve is open to a meaningful extent) and valve overlap (degrees of crank rotation during which the exhaust valve is still closing while the intake valve starts to open at the end of one cycle and the beginning of the next) also have a big effect on how the engine delivers power. 

With a traditional camshaft, it’s one and done since whatever specifications were ground into the lobes at the factory are all you have to work with short of a swap. Hot rodders came up with some work-arounds, of course – part of the skill set of the traditional pushrod V8 racer was ‘degreeing the cam’ which involves using an adjustable timing gear set to move the cam’s timing earlier or later in the cycle, and dual overhead cam engines can use the same strategy plus change the intake and exhaust timing relative to one another to get some adjustability for overlap, but this was strictly something done in the shop rather than on the fly while the engine was running. More crucially, it didn’t change the cam lobes’ profile or lift.  

A Stroke of Genius

The solution seems obvious now, but at the time it required asking what sounds like a dumb question – “If the engine runs best with one cam design at low speed, and another at high speed, why not give it two cams?” At its core, that is all VTEC is – a way to put two completely different camshaft grinds into the same engine, and switch between them on demand. That’s much easier said than done, though, especially when whatever you come up with has to be simple enough to produce economically, durable enough to last for a hundred thousand miles or more, and designed to fail ‘gracefully’ and not leave you stranded if something goes wrong. 

… that is all VTEC is – a way to put two completely different camshaft grinds into the same engine, and switch between them on demand…

In 1984, Honda launched the New Concept Engine program with goals that included increasing torque and horsepower for their car engines across the RPM range, with an eventual benchmark of achieving 100 horsepower per liter of engine displacement for production engines. Initially, the NCE initiative led to powerplants like the DOHC ZC (forerunner of the D-series engine) as early as 1985, but the real breakthrough came when previous research begun in 1983 into a system intended to improve fuel economy was rolled into the new project. 

One of the main players in the NCE project was Ikuo Kajitani from Honda’s First Design Department in their Tochigi R&D Center. “Characteristically,” Kajitani said, “four-valve engines are known as high-revving, high-output machines. And for that reason we knew it would be quite difficult to achieve low-end performance if the engine’s displacement were too small.” He was certain that a solution to the problem could be found in the work done on the fuel economy project in the form of an engine that could change valve timing and lift dynamically during operation.

This capability took shape as a very simple but elegant system that uses only a few additional parts compared to a conventional valvetrain. At the beginning, the team had considered around thirty different methods of achieving this goal, but to narrow down the field, priority was given to systems that relied on proven technology rather than novel approaches that might have unforeseen show-stopping flaws. With a mixture of caution and optimism, ideas that seemed promising but had a high risk of being developmental dead-ends were set aside. One of the most important goals was to have a mechanism that could handle 400,000 cycles without failing. In the end, the team settled on the system we now know as the original VTEC.

For each cylinder, instead of a single cam lobe to control valve events, there would be three: Two low-speed lobes with a single high-speed lobe between them. With the system deactivated, each valve would be controlled by its own low-speed lobe, while a third cam follower with no direct connection to the valves followed the profile of the single high-speed lobe. On computer command, a hydraulic valve would send oil pressure to move a pin into place to connect the outer followers to the inner one and lock the whole assembly together, causing the valves to follow the more aggressive center cam lobe profile. 

No Magic Involved

Though the concept was simple, there were still significant technological hurdles to overcome. One major example of this was the fact that they needed to squeeze three lobes into the space originally occupied by one, and those lobes would also be operating the valvetrain under higher loads and engine speeds than they’d previously been engineered for. Solving this issue required improvements in both metallurgy and design, but the team achieved their goal (and then some) in time to confidently introduce the new technology for the 1989 model year. 

While VTEC in its original incarnation does allow an engine to operate in ways that a fixed valvetrain simply can’t, there’s a widely-held misconception that it’s some kind of super-science that works like hitting the switch on a nitrous system. In reality, what it did was allow Honda to build engines with the ability to change between a cam designed for efficient, clean, and fuel-sipping performance to one with the grind the engineers wanted to use in the first place. As a matter of fact, it’s not uncommon in race applications to use a single-grind camshaft that actually defeats VTEC in order to increase tolerance for abuse and reduce complexity and weight. When street driving isn’t high on your priority list, the flexibility and broad powerband that VTEC allows isn’t as important, but it makes a huge difference in your daily driver.

…it’s not uncommon in race applications to use a single-grind camshaft that actually defeats VTEC in order to increase tolerance for abuse and reduce complexity and weight…

The Bigger Picture

For all the popularity of “VTEC just kicked in” memes, the system actually does what it was intended to do – Allow small-displacement engines capable of high fuel economy and low emissions during test cycles and normal driving to also provide exceptional horsepower when run hard. In the process, Honda managed to turn cars like the Civic from quirky but reliable transportation devices into ones that were actually fun to drive fast. Whether it was their intention or not, you can argue that the evergreen popularity of all the generations of Civic that followed were a direct result of the NCE project and the development of VTEC. 

Today, every manufacturer has implemented some sort of variable valve timing setup, even for old-school pushrod V8 engine designs. There’s a veritable alphabet soup of acronyms used to describe all the different proprietary ways manufacturers have come up with to adjust valve timing, intake versus exhaust cam phasing, and so on, and Honda has gone on to improve their own engines with VTEC-E, 3-Stage VTEC, i-VTEC, and i-VTEC with Variable Cylinder Management. But the real special sauce – changing to a completely different cam profile on demand – remains at the core of VTEC technology. Until we reach a point where camless valve actuation via pneumatic or electronic direct control finally makes its way from the cost-is-no-concern pressure cooker of Formula One racing to the street, Honda’s approach will likely remain as the best way to change lift and duration on the fly. 

You Bought A New Track Car – Now What?

Essentials for Hot Laps on a 5k Budget

So you’ve taken the plunge and bought yourself a dedicated track car. You did your research, found what you were looking for in sound mechanical condition and not already so far from stock that you’d have to rip everything out before doing it the way it should have been done in the first place, and you’re eager to get it prepped and put some laps on it. But you’re not made of money, and your meme stocks only got you into low earth orbit instead of to the moon, so you have a $5,000 budget for everything you’re going to need. 

Some hard choices will have to be made, because every dollar spent in one area means a dollar less to spend somewhere else. Here’s how we would allocate those 50 Benjamins most effectively – while your priorities are going to vary from ours, having a plan is the difference between a car on the track and yard art on jackstands for another year because you ran out of money and motivation.

Helmet – $350 ($4,650 Remaining)

Yes, we know you already have a helmet you bought off Craigslist. Yes, we know you are the one driver who will never, ever crash. This is still non-negotiable. Every reputable track day event organizer will insist on an ‘in-date’ skid lid that meets an accepted testing standard. Most often this is Snell SA or its equivalent – some sanctions will accept a Snell M-rated helmet, but the DOT-only models are almost always not considered good enough, for a reason.

Helmets designed to meet the SA and similar ratings have features that make them better suited for automotive use, where sharp impacts with objects that can penetrate the shell are more likely than the types of forces involved in motorcycle crashes, and they’ll have a fire-resistant liner. The “in-date” part is important too; the impact-absorbing liner has a finite lifespan, which gets shorter the more it is exposed to temperature extremes or solvent and gasoline fumes. 

While it’s possible to get an open-face helmet that carries a SA2020 tag for as little as $160, we recommend a full-face model, and as the list price goes up you’ll also get better fit and finish and improved comfort, which is important when you’re trying to concentrate on-track. Throw in another $40 or so for a fire resistant head sock (also good for comfort, as well as keeping the liner of the helmet cleaner) and $350 is a reasonable starting point for this critically important item.

Tires/Wheels – $2000 ($2650 Remaining)

We’re assuming that if you’re limited to a $5k overall budget for track car upgrades, you’re probably not going to trailer to and from events. We’re also going to assume that you will want a separate set of wheels and tires so that you’re not burning through expensive high-performance tires daily driving on them (though mad props to you if you are hardcore like that – we’ve been there ourselves). Like everything else on this list, wheels aren’t an area where you want to cut corners, but it’s entirely possible to get into a set of four new, quality wheels from a reputable manufacturer for around a grand. For that price, you are looking at cast rather than forged wheels, so the tradeoff is slightly higher weight for a lower price, as well as not being as forgiving or repairable when tweaked during inevitable encounters with debris or curbs.

Like everything else on this list, wheels aren’t an area where you want to cut corners, but it’s entirely possible to get into a set of four new, quality wheels from a reputable manufacturer for around a grand…

Tires are consumables, and depending on how hard you run them and what your level of compromise is between grip and longevity, these may have to be replaced several times a season. Fortunately, it’s often possible to find a well-heeled fellow enthusiast who always has used tires that have ‘gone off’ for full-boogie competition purposes but still have plenty of laps left in them for less serious use, so we’re compromising and putting a cost of $250 a corner out there to give some wiggle room for that initial set. Like always, your experience may vary, and cars with uncommon fitments or really big meat will tend toward the more pricey end of the spectrum. 

Brake Upgrades – $1250 ($1400)

Here’s another area where there is a wide range of possibilities – if your track car has decent stock brakes, all that may be necessary for anything less than full competition use might be a change to a different brake compound, braided stainless flex lines, new rotors, and a fluid flush and bleed. On the other hand, most cars of interest to the track day crowd have a lot of bolt-on options at surprisingly reasonable prices. If you don’t go totally nuts, our budget should at least cover a front caliper upgrade in addition to the other things mentioned above, plus a spare set of pads to be bedded in and brought with you if you’ve chosen a soft-but-grippy compound and a tight course to run on for a mid-day swap.

if your track car has decent stock brakes, all that may be necessary for anything less than full competition use might be a change to a different brake compound, braided stainless flex lines, new rotors, and a fluid flush and bleed…

Suspension upgrades – $1400

We’re going to take the last of our remaining budget and allocate it toward suspension. On the less expensive end of the scale, a complete, properly engineered and matched set of quality replacement springs, dampers, anti-roll bars, and polyurethane bushings can set you back as little as $750, while the sky is the limit for a complete competition-spec coilover conversion with multi-way adjustable dampers. We’re splitting the difference here, but odds are you will come in either substantially above or below our average estimated price. Depending on what kind of tracks you prefer, you may prioritize suspension above brakes, or the other way around, and adjust your spending on these last two categories accordingly.

One thing you absolutely do not want to do under any circumstances is to cheap out here; there are a lot of janky ‘lowering kits’ and coilover conversion setups with suspiciously low price tags and brand names you have never heard of, but spending any money on components of dubious quality and unclear origin can only lead to disaster. 

That Money Went Fast…

As you can see, it doesn’t take a whole lot to blow through $5k getting your new toy set up properly, but going into it with clear expectations for the cost and effort involved can keep your dreams from dying before you ever get to the track. Keep in mind that this is just a start, and in order to keep your racing fun sustainable, it’s a good idea to set aside money for every event you attend in some place where you won’t spend it, to be used for future consumables like tires, brakes, and maintenance items. Budgeting is never fun, but it makes the fun stuff possible, and helps you to drive more and dream less. 

First Look at the 2023 C8 Corvette Z06

Sep. 30, 2021 – The excitement about the C8 Corvette never seems to die down, even from when it was first conceived. Since its debut to the world on July 18,2019, the C8 Corvette has been a revolutionary car for the brand, as it is the first mid-engined Corvette in history. But one question asked by every automotive enthusiast in existence is whether or not a C8 Corvette Z06 was going to be released. And in true Chevrolet fashion, they answered, and on Tuesday, October 26th, they’ll debut it.

The new C8 Corvette Z06 pictures and videos have circulated the internet showing a heavily camouflaged Z06, but Chevrolet has decided to give the masses a visual taste of what this monstrosity of a vehicle is going to look like.

A naturally-aspirated 5.5-liter V8 will power the mid-engined sports car, capable of pushing out over 600 horsepower at an incredibly high RPM, somewhere between 8500 and 9000. Judging by past Z06 packages and shots of the camouflaged variants, the Chevy will most likely come with a larger wing, suspension upgrades, carbon ceramic brakes, and more. Stay tuned for the release to learn more about the Z06!

Hot Swaps

Engine And Chassis Combos Limited Only By Imagination

Engine swaps might seem like a recent thing, but OG hot rodders did it back in the 1950s, putting the then-new small block Chevy V8 into Ford Model T chassis, and when Cadillac created a long-stroke 500ci version of their corporate big block in 1970, wrecked Eldorados became a prime target for drag racers looking for as many cubes as they could get. Today, despite tightening regulations that threaten to make any kind of automotive modification illegal, let alone a complete motor swap, mixing and matching cars and drivetrains has never been more popular. Let’s look at some of the most common types of hybrid chassis and engine combinations (and we mean that in the cool way, not the electric motor ‘hybrid’ sense) and the reasons behind them.

All In The Family

In terms of sheer numbers of completed swaps, updating (or backdating, in some cases) a particular car with an engine from the same manufacturer takes the top position. In the import and sport compact world, the most common swaps involve upgrading Hondas with more powerful engines – the trend began with taking lightweight Civic or CRX shells originally equipped with fuel-sipping but low-output D-series four cylinder engines and replacing them with more powerful B-series engines from models higher up on the price and performance ladder. With the introduction of the even more powerful and versatile K-series, those became the donor engines of choice, despite being somewhat more complicated to swap due to the necessity of changing transmissions as well. The extra effort is worth it, though; 200 horsepower or more from a completely stock engine in a late-90’s Civic that tips the scales at under 2,400 pounds makes for very entertaining performance at an affordable price.

In terms of sheer numbers of completed swaps, updating (or backdating, in some cases) a particular car with an engine from the same manufacturer takes the top position…

Honda engine swaps have become so popular that you can find ready-made components like engine and transmission mounts, headers, and ECU adapters for pretty much any reasonable (and more than a few unreasonable) combination of engine and chassis. With the trailblazing handled, potential compatibility issues have all been sorted out by somebody somewhere. It just takes a bit of research to come up with a proven recipe to follow, and entire books have been written on the subject covering every last detail.

Another common form of swap involves putting an engine not available in the US market into a chassis that was sold here, with the first example that comes to mind being the Nissan 240SX. Known in Japan as the 180SX and Silvia, when the company brought this fun little RWD coupe to America, they decided to replace the JDM CA and SR series turbocharged engines with KA series naturally aspirated ones. This decision was likely based on the fact that the KA engines were already “federalized” for US emissions regulations and would be less expensive than bringing in a new powerplant without an existing approval. Though well-suited for mainstream buyers, since these engines had previously been used in Nissan’s Hardbody line, they were derided by some as ‘truck engines’ unworthy of the car’s sporty image.

Of course, enthusiasts care not for things such as EPA regulations, and many CA and SR engines got strapped to pallets in Japanese wrecking yards and shipped to the west coast to be reunited with S13 and S14 240SX models here. Some particularly ambitious souls went as far as to cram RB26DETT twin turbo inline sixes from the JDM Skyline GT-R (among other applications) into that chassis as well.

Speaking of legendary Japanese turbo sixes, let’s not forget the Toyota 2JZ-GTE. This engine powered a whole generation of the company’s flagship performance models, but only came to US showrooms in the Mark IV Supra Turbo. This engine has found its way into a number of different swaps, including both Lexus IS300/GS300/SC300 models as a replacement for its naturally-aspirated sibling, the 2JZ-GE, as well as other non-Toyotas with engine bays long enough to accommodate the sizeable inline six. 

Could Have Had a V8

Don’t think this is just limited to import brands, either. When Ford ended production of their classic pushrod 5.0 liter V8 engine in the mid-90s and replaced it with the high-tech overhead cam Modular family, it was only a matter of time before those engines started to find their way into Fox-body Mustangs and even classics. One of the disadvantages of overhead cam cylinder heads in a V-configuration engine layout is that compared to pushrod designs of similar displacement, they inevitably end up larger in width and height. Adding cams and timing gear to the top of the cylinders makes them inherently taller than engines that simply have to accommodate rocker arms beneath the valve covers. In a bit of irony, older muscle cars with their large engine bays have more room to accept Modular V8 swaps, making them somewhat easier to work on than modern factory Fords with cramped under-hood layouts. 

While Ford was breaking ties with their previous engine architecture, GM took a less radical path, introducing the first LS-series engines. These successors to the original small-block Chevy V8 and its follow-on “Gen II” LT replacements are in many ways a “what might have been” look at the direction Ford could have taken with their own small-block pushrod architecture. Though the Gen II engines had a lot of problems including a notoriously unreliable optical ignition pickup and were widely panned by gearheads, the Gen III/IV LS family turned out to be a huge success.

Lightweight, powerful, durable, plentiful, and cheap, they quickly replaced the venerable SBC as the engine of choice for GM swaps. Like the aforementioned Honda engines, a huge aftermarket has developed to make putting an LS into an older car easy, right down to complete kits that handle ignition and carburetion should you choose to go old-school and ‘downgrade’ from EFI. Another factor that led to their popularity was that they were manufactured in both iron and aluminum block form, so that those in search of an inexpensive and bomb-proof bottom end could simply grab a low-compression iron block truck motor from the local pick-a-part and feed it a decent amount of boost or nitrous without a lot of drama.

Cross Breeding

While mixing and matching engines and chassis from the same manufacturer often makes things somewhat easier because of shared mechanical and electronic components, taking an engine from one maker and stuffing it into another company’s car has been popular forever as well. As we mentioned before, early hot rodders who started out by putting Ford Flathead V8 engines into Model Ts embraced the original small-block Chevy with great enthusiasm as soon as they started turning up in junkyards. Today, purists will howl in outrage about LS-swapped Fox Mustangs, but a dispassionate look at it shows this is the same kind of thing gearheads have always done. Mustang engine transplants aren’t limited to just Chevy engines either – Most famously, the notable 2006 documentary film The Fast and the Furious: Tokyo Drift included a 1967 Ford Mustang Fastback with a Nissan RB26DETT as a ‘hero car.’

Today, purists will howl in outrage about LS-swapped Fox Mustangs, but a dispassionate look at it shows this is the same kind of thing gearheads have always done…

Like Honda swaps, the popularity of the LS Fox combination has led to an entire range of aftermarket parts to make the process close to turn-key, and all the information necessary to make it happen successfully is easily accessible online and in print. In fact, there has been a strong “LS all the things!” movement in the enthusiast world, with practically every rear wheel drive platform becoming a candidate for a Gen III/IV GM V8 swap. It’s even reached the point where a backlash has occurred against it – many people see the commonality of the LS as a detriment to the originality and creativity of Pro Touring builds, preferring original or at least period-correct engines. Odds are that any SEMA resto-mod build that isn’t intended to specifically highlight another engine will have some flavor of LS power, to the point where it’s become a running joke among writers and photographers.

Regardless of one’s feelings about LS engine transplants, they’re going to be with us for the foreseeable future, and not just in cars. They’ve become the weapon of choice for inboard-powered boats of all kinds, as well as aircraft and even homebuilt helicopters. But eventually something new will come along, and it’s entirely possible that we may one day see all-electric powertrains with ‘universal’ designs developed to simply drop in place of an internal combustion engine and transmission. While one-off attempts at this have come and gone, as the hardware becomes standardized for OEM use (and thus also becomes more affordable) and battery technology advances to increase energy density, peak output, and cruising range, garage mechanics who want something completely different under the hood will embrace these swaps as well. 

About the Author: Paul Huizenga is a California-based freelance contributor who has owned, raced, and written about everything from Subarus to Mustangs to Corvettes over the last two decades. He is currently studying the feasibility of an LS4 engine and transmission swap into a Fox-body to convert it to Chevy power and front-wheel drive, because some men just want to watch the world burn.

Restore or Restomod?

What To Do With Your Classic Chevy C-10 Truck

Ultimately, the decision of what you decide to do with your truck is up to you—it should be, anyway. Don’t get caught up in the hype of what your pals are doing or what you constantly see in magazines or on social media. At the end of the day, the truck parked in your garage should best represent what you want to see out of it, not just what current trends say it should be. 

With that said, you’re going to have a lot of different avenues when it comes to prepping your truck to get back on the road. Now, some guys might only be concerned about whipping the engine back into shape and driving it as-is, with the original paint/patina and replacing parts with only factory OEM product when available. If OG parts can’t be sourced, using pieces that are designed to resemble original equipment is the only way to go for some Chevy purists. 

Going this route leans into the restoration realm of doing things, and there isn’t anything wrong with it at all. It’s pretty cool seeing an old truck maintain its heritage, and look like a time capsule piece of how it would’ve looked back in the day when it was the new truck on the block. There’s a much stricter guideline to follow going this route, as say going full-on custom, but there’s a place for every type of build out there. It’s just as impressive hearing about where a guy had to go to score rare original parts than it is seeing parts designed to fit but look completely different than stock. This is what truly makes both sides of the spectrum so interesting to see.

With a restomod project, builders celebrate their truck’s age and history while modernizing it to function and feel like a vehicle that better fits today’s standards. Updated creature comforts like stereo systems, aftermarket bolt-on products, non-OEM paint selections—now, these are on the modest side of things. Just wait until you get the urge to do some heavy custom bodywork, air ride suspension, and drop-in an LS performance engines. Stuff like this blows the covers off more straightforward restoration books, because there really aren’t any rules here. Every modification is geared toward personal style and demand. It’s all about picking up where the factory left off decades ago and building a truck that is more unique and personal. 

Sure, current trends keep a majority of restomod C10 trucks looking somewhat uniform, as low suspension stance (air ride or static) and large-diameter wheels have seemingly become a standard for street-styled trucks, but even so, there is still a lot of room to be unique and stand out from the crowd. These trucks are perfect candidates to outfit for street track driving with more responsive coilover chassis setups. There’s even room to go completely against the grain with a restomod, as there are a big number of C10 and C20 trucks that rock lifted suspensions complete with proper off-road wheels and tires to match. 

As with all types of classic or collectible vehicles, there is the question of value when the time ever comes to resell. There are still bone stock C10 “barn find” trucks out there for sale that haven’t seen the road in years, let alone any type of upkeep or customization. These tend to get a lot of attention because most builders would prefer to start with an untouched gem, without having to redo potential shoddy work done by a previous tinkerer. When pitted against each other, it’s fairly common to see a well-done restomod truck selling for more than a clean restored C10. The more of the high profile builds that are featured in all the magazines as well as a SEMA appearance, make it to the auction block and sell for impressive amounts. Now, it might be fractions of what was actually spent in parts and tons of billable hours of fabrication work, but full custom trucks are in demand, especially for someone looking for a completed truck who doesn’t want to start one from the ground up. 

Are restored trucks still valuable? Well, yeah, of course. If there’s a guy out there looking for the exact same truck like his dad or grandpa had when he was a kid, you’d better believe he’s going to lay down some good money to buy something that takes him back to his childhood. Nostalgia sells, especially when it comes to vintage vehicles. Guys looking for the no-frills route, or plan to customize on their own, might also look to this market for the right truck to purchase. 

Nothing is more valuable, however, than having something that has been carefully crafted to suit your specific taste. Now, that could come in the form of a beautifully restored or totally customized pickup—only you can determine that value for yourself. Either way, you’ll have to invest time and money into whatever route you choose to take. And if you don’t even plan to flip the truck, then resale value goes completely out the window. 

Most everyone has one similar goal when building any type of classic truck, and that is for it to be their own, and to reflect their own wants/needs and personality. Think about it—just how many C10s do you see on a daily basis? Not too many, right? Now, think how many completely restored or customized C10s you see. Unless there’s a car show in town, or you just happen to catch that one guy in the neighborhood who has one, chances are you just aren’t going to see them as often as you’d think. Given that fact, your truck is going to be unique no matter what you end up doing with it, and you’re still going to have a blast putting it together—and that’s what really matters once the dust settles. 

A Closer Look at the 2021 Ford Bronco

Does the New Model live Up to the Hype?

There’s a lot to be said about the re-release of vehicle models that go on years-long hiatuses. Some will love, like, or downright hate a factory’s new rendition of an old classic. We’ve seen old muscle car nameplates flex once again in recent years, and while the resurrection of the Chevy Blazer did receive some positive attention at the jump, it really doesn’t seem to be making a lasting impression amongst truck and SUV fans as the 2021 Ford Bronco promises to deliver. 

While we could go on a bit longer about why the Blazer didn’t live up to its expectation, we aren’t really here to touch on that. What we are here to do, however, is to examine just how new Ford Bronco stands to live up to the absolute legend that is its past self. While this task seems easy enough to do, it somehow feels a lot like dissecting a modern classic movie remake. Casual or impartial fans will see the new Bronco for what it is without being overly critical than decades-deep Bronco fanatics who will hold Ford directly responsible for not building their favorite truck “like they used to”. 

While this seems like dangerous grounds to be standing on, the Bronco does have a lot going for it, which makes it highly capable of scoring valuable points from across the many categories of admirers across the market. 

Let’s first start by taking the diehard first gen Bronco into consideration. Ford has modeled the 2021 Bronco to look and feel closer to the all-American, more compact Bronco of the 60’s rather than the later, larger OJ era Bronco of the 90’s. Nostalgia sells for a premium these days, and if there’s a specific version of the SUV to base the reboot after, it’s just gotta be this mid century classic. 

Size wise, the new age Bronco is officially on record as a midsize SUV, which is smack dab in the middle of first gen’s compact classification, and the fifth (and last) gen’s fullsize ranking. Now, it is also important to note that all Broncos previous to the 2021 model were offered in 2-door configuration. The new model is being released as a 2-door, as a nod to its heritage, but it is also being made available in a 4-door option now as well to keep up with modern SUV style and convenience. The 4-door will obviously out measure the 5^th gen 2-door, making it large enough to comfortably fit extra passengers or cargo. 

Aside from size, the new Bronco does have quite a bit in common with its predecessor in the looks department as well. A lot of key elements uphold the spirit of the 1^st gen style pioneer. The use of round headlights, a familiar grille design and an option of a soft top or removable hardtop (depending on door configuration) does call back to a time gone by. Maybe the Bronco would have naturally progressed into this updated take of its inaugural design if it had remained in regular production—it’s tough to say. On the other hand, the remodel may have required a necessary hiatus period for the classic adventure orientated SUV to truly be missed and the calls for nostalgic value to be heard and answered. 

Ford will not only introduce one new 2021 Bronco, but multiple Broncos (7 to be exact). From the base model, all the way up to the top of the line ‘First Edition’ edition, which is trimmed and optioned out with the best upgrade packages from the variations ‘below’ it. The wide variety of premium add-ons that will be available will truly separate the Bronco of old with this year’s model. Lots of technology is available from remote start with the entry level model to a 12-inch LCD touchscreen and B&O sound system available starting in the mid-tier Outer Banks trim package. It’s a little unfair to compare the interiors of the new and old Bronco, as the previous truck was a true utility vehicle of its time. The standard then was minimal to say the least, and today’s Bronco definitely brings the SUV up to meet modern conveniences and luxury comforts we have grown accustomed to. 

The 2021 Bronco isn’t just a handsome, renovated shell with some convenient bells and whistles attached, as the base model is equipped with a 2.3L turbocharged 4-banger that boasts 270HP with 310 lb-ft of torque—not too shabby to start. There’s also an optional 2.7L turbo V-6 that’s also available for additional romp. Transmission offerings include a seven-speed manual with a crawler gear standard on the 2.3L, as well as a 10-speed auto that is standard issue on the 2.7L and optional equipment on the smaller engine. These modern power plants most definitely blow the largest of original engine models, the 205HP 4.9L V-8 small block, right off the trail. 

Suspension and smart driving modes also set the new Bronco apart from the old version. To start, the full-boxed steel frame and the IFS system already give the 2021 Bronco a leg up, but then it starts racking up more technical features higher up in the trim level chain. The Go Over Any Terrain (GOAT) package features eight unique driving modes including Normal, Eco, Sport, Slippery, Sand, Baja, Mud/Ruts, and Rock Crawl—enough to satisfy any type of driver in just about any type of off-road condition. 

The anticipation for the 2021 Ford Bronco has been building steadily, and for good reason. It’s been 55 years since the OG Bronco was released, and in that time it has gained a tremendous reputation and devout following. It’s almost unfair to pit the new model against its previous self, given the obvious advantages available to it, but it’s cool to see what the Bronco has evolved into. This is the SUV its fans have been awaiting. For the “purists” who may not be planning to partake in this next generation of Bronco adventure, there’s still no denying the potential this new generation has to becoming a lasting presence in the modern off-road marketplace. 

Springs vs. Coilovers vs. Bags: What’s the Difference?

Are Springs, Coilovers, or Air Suspension Best for Performance?

It might seem like common sense that having more choices when it comes to just about any decision is a good thing. In many circumstances, that’s true, but when presented with too many options, ‘decision paralysis’ can set in, making it harder instead of easier to choose the right path. Instead of making life easier, it causes anxiety, slows down or even stops decision-making, and can even lead to remorse after the fact as you churn through all the possibilities you didn’t pick. 

When it comes to upgrading a car’s suspension for high performance street or track use, we’ve reached the point where for many popular platforms, there’s no clear winner for every situation out of a wide variety of aftermarket setups. While we can’t guarantee you’ll avoid ‘paralysis by analysis,’ we might be able to help clarify your priorities with the following look at the pros and cons of the three basic categories of mods: Spring and damper replacement, coilover conversion, and air suspension. 

Springs and Shocks/Struts

This category encompasses replacing the factory-spec springs and dampers (whether those are conventional shock absorbers, MacPherson struts, or a combination of the two) with upgraded aftermarket parts.  

Pro:

• Likely to be the least-expensive option, both to buy and to install (if you don’t do it yourself)
• Properly-engineered matching suspension kits take the guesswork out of picking the right spring rates and compression/rebound settings
• Durability is often as good as or better than factory parts
• Some high-end kits offer limited damper adjustment for fine-tuning
• Fewest compromises in ride quality and noise for dual use street/track cars

Con:

• Limited range of spring rates for applications ‘out of the mainstream’
• Systems on the most affordable end of the spectrum usually offer no ride height or damping adjustment

The Bottom Line:

Usually the least-expensive and most-available option, but with significant compromises in adjustability and performance as the tradeoff.

Coilover Conversion

For the purpose of this discussion, we’re going to define coilovers as a complete replacement of the factory spring and damper setup, whether those are individual components or struts, with aftermarket alternatives. This is the most typical choice for serious track applications, but also has a wide fanbase for street/track use as well – partially because of the serious race cred and the ‘hardcore’ aura that goes with the tradeoffs involved. 

Pro: 

• Short of a completely re-engineered suspension right down to the control arms and chassis attachment points, coilovers offer the best possible handling and the widest range of adjustment, as well as more precision and repeatability when changing settings
• Good coverage from multiple manufacturers for the most popular car applications
• Narrower coilover units can offer more clearance for wider wheels and tires without fender modification
• Adjustable ride height without altering spring rates
• Dampers available in configurations from non-adjustable to 4-way (high/low speed compression and rebound)
• Relatively simple and easy to change spring rates with ‘universal’ springs to suit different track conditions

Con: 

• A very, very wide range of quality/price, from pro level down to “I bought this off of Wish – why doesn’t it fit?”
• A whole new form of decision paralysis – lots of adjustment often means more ways to get it wrong
• Systems intended for track use can be noisy and harsh on less-than-perfect pavement
• Expect to either replace or rebuild the dampers on a regular basis, as they are usually designed with longevity as a lower priority
• Less-common performance cars may need to have coilover sets pieced together from components if ‘all in one box’ kits aren’t available

The Bottom Line:

Not the best choice for comfort or street driving, but the de-facto standard for full-race use. Beware of pitfalls in quality at the low end of the scale, and excessive complexity at the high end.

Air Suspension

Commonly referred to as “bags,” today’s performance-oriented air suspension systems are a far cry from the lashed-together rigs that pioneered the technology. Once strictly an option for “stance” and car shows instead of performance, it’s now a solid contender for track-oriented builds.

Pro:

• Adjustable ride height is the main attraction here – modern air springs offer a wide range of spring heights selectable simply by adding or reducing pressure, and clever design of the air bags themselves achieves this without significant changes in spring rate
• Compatible with multi-adjustable race-spec dampers for suspension tuning
• Systems with quality air springs rival conventional factory steel springs for durability
• A great choice for cars that will see use on both the race course and the street, making low ride height that would be a disaster with a ‘static’ coilover suspension achievable in a car you can still drive to and from the track
• Complete, ready-to-install kits are available for more applications every day

Con: 

• Trends towards the expensive end of the scale compared to anything but full-race coilover systems
• Additional hardware like compressors, tanks, solenoids, and pressure gauges required for adjustment on-the-fly, which adds expense and weight
• Modern air springs only allow changes in ride height while spring rate remains the same, requiring complete replacement of a relatively expensive component to alter it
• Like coilovers, less-popular applications may require ‘a la carte’ component selection instead of an off-the-shelf solution

The Bottom Line:
The king of adjustability, at the expense of additional weight and cost. Limited (but growing) off-the-shelf choices.

Wrapping it Up

There’s no one-size-fits all solution to picking the right path for the suspension on your project car or daily driver, and the wide variety of choices (made worse by conflicting advice from all directions) doesn’t help. Hopefully we’ve made it a little bit easier for you to organize your priorities, from the cost involved to the complexity of installation and tuning to your personal intended use (which often turns out to be somewhat different from where you actually end up in practice). Relax, take a deep breath, and consider the options we have set before you as a starting point in your search for the perfect suspension.

Are 35 Inch Tires Right for Your Rig?

The number one question people ask about is what size tire will fit my vehicle. Nothing gives your off road vehicle a more aggressive look than larger tires, and custom wheels. Fortunately, larger tires will give you just as much of a performance gain as they do a visual enhancement. One of the most popular tire sizes is a 35 inch tall tire. Depending on your vehicle, 35 inch tires could be a simple bolt on process, or entail several modifications in order to make them fit. If you have an AWD, car based overlander, or small SUV, you might want to try something smaller. On the other hand, a full size truck can allow enough clearance to bolt on 35’s with no issues. 

Automotive designers tend to make the wheel openings tall, but narrow. It probably has to do with aerodynamics. The wind turbulence created by wheel openings affects the coefficient of drag considerably which also reduces fuel mileage. Despite their good intentions, the lack of clearance is a real issue. Modern trucks have plastic fender flares, and side body cladding that can also hamper your efforts to fit larger than standard tires. In the past you could simply get out a saw, and cut the sheet metal away. Most people with new vehicles frown upon this as it is irreversible. Many don’t want to cut into such a large investment; that’s why lift kits are used. Not only do lift kits give additional ground clearance, but they also provide more room for larger tires.  

So why go to all that trouble you may ask? The answer is because your tires are the only thing between you and the dirt. Would you rather hike a trail in a pair of ice skates, or hiking boots? Some of us wouldn’t want to be on ice with ice skates let alone on a trail, but that’s another topic. Once you have increased the width of your tires, the only other way to increase the size of the contact patch is with a larger diameter. The contact patch is the surface area of the tire that directly makes contact with the ground. As the tire gets wider, the contact patch increases in width. As the tire diameter increases, the contact patch also grows in length. Increasing the length of your contact patch can give you much more contact patch on the ground. The size of the contact patch is critical because it provides the grip needed to stop, go, and turn. Increasing the contact patch is the easiest way to get better control. 

So why stop at 35 inches, why not go even bigger? That’s a great question, and the reason is simple. Once your tires reach a certain size, they start to affect other parts of your vehicle. They will put a strain on driveline components, and your gear ratio might not be suitable to allow the engine to operate in the correct RPM range that it needs. The bigger tires may be too much for your steering components as the contact patch creates so much grip. You also need to consider your brakes. You can see that once you start making changes to your vehicle, it creates a huge snowball rolling downhill. You will end up spending thousands of dollars, and entirely re-engineering your vehicle. That’s why tires in the range of 32 to 35 inches are popular upgrades. They can be made to work without too much disturbance of your factory systems. Some people have trail only vehicles, but most of us also want to drive on the street, or commute to work.

A 35 inch tall tire is still a big tire. It will affect your final drive ratio, and your braking, but many people will gladly accept that for the increase in traction. There is a camp that typically drives in muddy conditions who like tall narrow tires. They contend that the skinny tire cuts through the mud, and gets down to firm earth where there is traction. This only works if there is a bottom to the mud. If the mud is deeper than the distance between the surface of the mud, and your truck’s frame or the body, then you are likely to get stuck. A wider tire will provide flotation. Instead of cutting into the mud, it will resist sinking in; allowing the vehicle to remain on top. As many people know, and all will find out, mud doesn’t care either way. You can get stuck using a skinny, or a wide tire. The skinny tire concept is somewhat specialized. It doesn’t work on wet roads, or sand. That’s why most people prefer a wider tire. 

Personally, I like the way my vehicles handle with a large, wide tire. It feels much more stable to me, and it helps to build confidence when in certain off camber, or loose conditions. A larger tire also comes in handy when you are traversing ruts. Most of the time, it’s much better to roll over the ruts, than to fall into them. If you are driving the same direction as the ruts, you may only have an inch of tire still riding on the top edge, and that’s all it takes to stay on top. The same goes for washouts, or obstacles. When you come up to an obstacle that needs to be scaled, a taller tire will roll over it much easier than a shorter tire. The shorter tire will need to climb up the obstacle while the taller tire will have more of a tendency to roll over it. 

So you see, there is a reason why 35 inch tall tires are so popular. For most vehicles, they give you as much performance as possible without negatively impacting your vehicle. Like all modifications, you need to weigh the positives with the negatives. Most people will agree after weighing the options that installing 35 inch tall tires on your rig will give it the performance you want in the dirt, and set you apart from all the stock trucks out there.            

What’s the Next 240sx?

Filling The Iconic Tuner Car’s Shoes Won’t Be Easy

Unappreciated in its day, only available in the US with the much-maligned KA24 “truck motor,” and canceled Stateside before we could get the S15 version, Nissan’s 240SX has finally gained the popularity among enthusiasts it deserved from the start. Unfortunately, the days of picking up an unmolested, factory-original Nissan 240sx for sale for next to nothing are long gone, leaving us to wonder what might be the next platform to take its place in our hearts as the true 240SX alternative. 

After much beard-scratching and somber contemplation of the question, we’ve come up with five possible candidates for “the next 240SX.” We’re sure that not everyone will agree with our choices, but we’ll try to list the pros and cons of each so that at least you know why we picked the cars we did. Now, in no particular order, here’s our best guesses:

SN-95 Ford Mustang (1994-2004)

Before you get all bunched up about a domestic pony car being on our list, hear us out. These cars are cheap, plentiful, available with an OHC V8 in 2-, 3-, and 4-valve per cylinder layouts depending on year and model, and there’s an enormous performance aftermarket for practically every important component from driveline to suspension. They’re relatively light for their size, especially the V6 models, mechanically uncomplicated compared to more modern cars, and if you really want a turbo 4 or V6, all the show-stoppers involved in an EcoBoost swap have more or less been figured out. 

The only real knock on this platform is that the vast majority were solid-axle cars (but so was the AE86…) and even that can be addressed with a factory IRS rear end swap from a 1999-2004 Cobra or as a complete kit from Ford Performance Parts.

NA/NB Mazda Miata (1989-2005)

Here’s another potentially controversial addition to our list. The first and second gen Miata, despite having all the right elements put together in a very competent manner, labor under the stereotype of being a “chick car” – and that’s about the nicest way to say it. Nevertheless, they’re a ton of fun to drive, there’s an endless assortment of upgrades available thanks to a very substantial presence in club racing, and if you want more power than the standard naturally-aspirated 1.6 or 1.8l engine delivers, there’s always the 178-horsepower factory turbocharged 2004-2005 Mazdaspeed model. There were even people building complete kits to drop 5.0l pushrod Ford V8 engines into them before LS-swapped 240s were a thing.

On the downside, there is the fact that even without the optional hard top or the standard cloth roof up, the Miata is cramped at best, and an interference fit for drivers on the taller half of the adult American bell curve. Even so, the clearest signal that these cars are on the upswing in popularity is the fact that it is getting harder and harder to find them for sale in reasonable condition at bargain prices. If you fit, and you are secure enough in your identity to just laugh off the haters, these Mazdas are worth serious consideration.

Z33 Nissan 350Z (2003-2008)

After Nissan basically had the 300ZX priced out of the US market in 1996, the Z32 platform lingered until 2000 in its home country, but no replacement was immediately forthcoming. It took Renault’s purchase of a huge chunk of the company and the installation of automotive visionary/international fugitive from justice Carlos Ghosn as Nissan CEO to get the Z back into production. The result was a very competent sports car that took the nameplate back to its roots after the previous generations had gotten progressively softer and more oriented toward the “grand tourer” paradigm.

The VQ35 N/A V6 provided ample power from the outset and got better as the Z33 model years progressed, starting at 287 horsepower, then getting a bump to 300 for 2005 and finally 306 for the final two years of production. ‘07-’08 models are also generally agreed to have the best gearboxes out of the bunch as well. Needless to say, there’s an enormous amount of factory and aftermarket parts support, and these cars have always been popular with tuners so competent setup and modification isn’t exactly blazing a new trail.

Unfortunately, when the Z34/370Z was introduced, these cars saw a large enough drop in price in the secondary market that even though they were relatively new, they were still cheap enough to be chewed up en mass by owners and shops not entirely focused on treating them respectfully. As a result, those that escaped rough handling can be hard to find and somewhat pricey, but if you are willing to do some searching and possibly undo previous mods made with more enthusiasm than skill, the 350Z is a good candidate as a replacement to the 24osx.

Toyota 86/Scion FR-S/Subaru BRZ (2012-2020)

When the Subieota twins were introduced in the US under both Toyota’s Scion sub-brand and Subaru badging, the expectations among enthusiasts were sky-high. So high, in fact, that despite getting all the fundamentals right, the car wasn’t a huge hit, with US combined sales peaking at just under 27,000 units in 2013, and dwindling to under 5,000 by 2020. Some of that can be attributed to the belief that a turbo version was just around the corner, but the only engine available was a N/A 2-liter flat four from the Subaru parts bin that only delivered 205 horsepower.

Some automotive journalists are still betting on a second generation eventually going into production with Subaru’s turbo 2.4 and an additional 55 or so horsepower, but current events and ever-declining sales numbers during the initial run bode against that. Since there’s little mechanical difference between the first and last models and depreciation has had almost a decade to work its magic on the price of early cars (which were never really overpriced new, at least once dealers stopped adding on additional markup) these may be an up-and-comer for the title of “next 240SX.” Aftermarket parts selection is OK but not extraordinary, and there are relatively straightforward engine swaps to Subaru’s more desirable engines being done on the regular. We’ve even seen a “BRZ-06” with a Corvette LS under the hood, though we suspect that replacement rear tires for that car will cost more than the conversion in the long run…

Hyundai Genesis Coupe (2010-2016)

Here’s one we almost guarantee wasn’t on your radar before this – Hyundai’s first RWD sports coupe is one of those, “oh right, I remember that!” cars that never really got the attention it deserved, in our opinion. Available with a choice of 2.0l turbocharged four cylinder or 3.8l V6 power, it was mostly lost in the shadow of its contemporaries like the aforementioned Toyobaru and even the then-current V6 Mustang and Camaro. The 2013-up turbo four delivered 275 or so horsepower, complete with a bit of boost lag not seen much any more (but highly nostalgic in its own way). The GDI version of the V6 that dropped in 2013 also picked up substantial power compared to its multiport-injected predecessor, rated at just shy of 350 ponies and putting it on par with the 370Z NISMO, if you can believe it.

Aftermarket support is sparse but not non-existent, and these typically carry a late-model used car price tag, but you can be assured that you won’t be lost in a sea of Genesis Coupes at your local cruise night, and they are a ton of fun to drive, with even the N/A V6 models being surprisingly tossable much like the Nissan 240sx. 

That concludes our conjecture for now, and as we draw the veil over our crystal ball until next time, we wonder what your predictions are for the enthusiast successor to the 240SX…

Gunther Werks Unveils Their Take on One of the Rarest Porsches: The 993 Speedster Remastered

Aug 19, 2021 – If you like Porsches, you’re likely familiar with the makers of wild re-imaginations of classic Porsche platforms, Gunther Werks. The latest addition to their lineup is a vision of an extremely rare platform that only saw 2 units brought into this world; one for the designer of the original 911, Butzi Porsche, and the other for Jerry Seinfeld. Of course, we’re talking about the legendary Porsche 993 Speedster. Gunther Werks’ new 993 Speedster Remastered takes the original spirit of the Speedster and reimagines it, fleshing out its performance and aimed at providing a unique open top analog driving experience.

In true Gunther Werks fashion, carbon fiber is implemented wherever they can. The interior is mostly carbon fiber, the shorter front windshield is framed with a carbon fiber cowl, and the speedster top tonneau cover is also made of carbon fiber. With additional weight saving measures in place, the Gunther Werks Porsche 993 Speedster Remastered only weighs 2590lbs with a chassis that is even more rigid than the one in the 993 coupe.

Underneath the rear deck lives a 4.0L flat six engine that produces 435 hp and 335 lb/ft torque screaming with a 7,800rpm redline. The power from the flat six is translated through a Getrag G50 six-speed manual gearbox featured in the original 993, but with custom ratios. The Gunther Werks 993 Speedster stays composed on the track with an all-new adaptive suspension from JRZ, featuring 3 different settings; composed, sport, and sport plus.

Stronger, faster, and lighter are 3 words that without a doubt describe this new Gunther Werks project. Revealed with a striking Cannes green paint and Dawn Orange leather interior, this 993 is a testament to performance and styling. Only 25 of the 993 Speedster Remastered will be produced.

Lamborghini Brings Back the Legendary Countach With a v12 Hybrid Engine

Aug 18, 2021 – As a celebration of it’s 50th anniversary, the legendary Lamborghini Countach has returned and carries on the spirit of its iconic namesake while taking the nameplate into the future. The official name of the new Lamborghini is the Countach LPI 800-4, and will bring along with it technology as futuristic as its name.

Featuring a longitudinally mounted V12 platform, this new Countach is promised to deliver the same high performance experience you’d expect from a Lamborghini, but with a slight twist. This 6.5L V12 is combined with hybrid technology, the same used for development of the Lamborghini Sian, and is said to produce a combined 814cv (CV stands for chevaux vapeur, or horsepower) which is rounded to 800 providing the name “LPI 800-4”.  This power is delivered to a permanent four-wheel drive transmission, and makes it go from 0-100km/h in just 2.8 second with a top speed of 355km/h.

The design of the Countach LPI 800-4 is definitely reminiscent of its 70s predecessor, featuring strong and straight lines, and that iconic wedge shape. Though it doesn’t have the giant rear wing sported on the past LP500 model, it does have the signature Countach quad exhaust and scissor doors.

The final outcome of the new Lamborghini Countach LP800-4 is evolution of it’s predecessors spirit of pushing boundaries of performance into the modern age. There will be a very limited run of the LP800-4; only 112 units will be made. So for most of us once again, the Lamborghini Countach will live only as a poster on our walls.